PDA

View Full Version : Windows System Repair



mb3000
11-23-2011, 04:33 PM
Inspiron 1720 running Vista, X86 based

C:\windows\system32\HID.DLL is the error I get.

Occasionally the "ALPS Pointing Driver has stopped functioning" will pop up too.


Ideally I would just restore to factory settings but the HID.DLL error prevents me from doing that the usual way (F8 at startup), I have also tried using the com line to start the process with no success. At this point I'm trying to repair the file to allow myself to restore the computer to factory settings. I've tried multiple downloads with no success.

Got any ideas?

mb3000
11-24-2011, 01:06 AM
Anyone?

Alan92RTTT
11-24-2011, 02:04 AM
You should be able to find the file on the install CD and copy it off and uncompress it and overwrite the bad one.

A real windows disk will have a repair option on the OS install that should fix it too.

GTOJOE
11-25-2011, 06:29 AM
run the automated systme repair. If that doesn't work try booting off the disc and running repair.

mb3000
12-05-2011, 02:25 AM
Still working on this, no luck yet.

Jimvr4
12-05-2011, 02:57 AM
I have never had any success with the repair options and always end up rebuilding the machine from scratch :(

If your plan is to restore factory settings and you are unable to because of a bad hard drive etc, then I suggest you get Dell to build you a set of backup DVDs designed for your model/serial number. Most manufacturers will do this for around $10 shipped.

mb3000
12-05-2011, 03:13 AM
Looks like what I'm going to have to do. I got a system repair CD and haven't made any progress so far.

Might just have to pickup a netbook for tuning. :dontknow2:

GTOJOE
12-05-2011, 04:56 AM
HID.sys is relating to a Human Interface Device. Most likely the Synaptics touchpad. When you restore a system to factory defaults you don't use F8 that is for the advanced startup menu so you can run safemode etc. On a dell to restore it to factory default [warning will delete all your files and settings] you need to push F9 I think. A quick google search for your dell model should give you the correct answer. But to do this you need to push F9 as soon as the laptop starts up and you see the Dell logo. If you wait till the logo is gone it's too late. If it's not F9 then try F10, F11 etc.

OBXBoost
12-05-2011, 08:12 AM
Have access to another computer and a thumb drive?

Drivers and Downloads | Dell [United States] (http://www.dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection)

Select "Choose from a list of all Dell products" and then continue

Select Laptops then select Inspiron and then Inspiron 1720

Make sure that under "Refine your results" has Windows Vista 32-bit selected, and scroll down to "Input (3)" and click the arrow beside it.

Where is says "Dell-Driver R165804.exe (3MB)" go to the right and click download.

Click "Download now" and make sure you save it to your thumb drive.

Take your thumb drive to your computer having the issue, boot into safe mode and then run that file.

Let me know how it works :)


If all else fails, grab/borrow a USB mouse and plug it in until you get the touch pad working.

Jimvr4
12-05-2011, 11:50 AM
Maybe a dumb question but have you tried using an external USB mouse?

And I agree with GTOJOE. The keystroke for entering recovery is usually F10 and it has to be pressed before boot up.

mb3000
12-06-2011, 12:07 AM
:lol: Guys, the touchpad/mouse works fine. I'll try some of the ideas suggested tonight and report back. Wish me luck.

mb3000
12-09-2011, 12:56 AM
Still working on this with no success :(

OBXBoost
12-09-2011, 09:48 AM
Still working on this with no success :(

Can't expect us to shoot in the dark unless you tell us what you have done. You're obviously having a driver based issue/conflict. Did you try the steps I outlined?

mb3000
12-09-2011, 09:58 AM
Can't expect us to shoot in the dark unless you tell us what you have done. You're obviously having a driver based issue/conflict. Did you try the steps I outlined?

Yes, it was already installed. I re-installed it with no success.

I should be more clear. In Vista, you use F8 to get to the advanced options menu. From there you're supposed to select "Repair my computer" and this takes you to etc... My problem is that when I select "repair my computer" my computer just starts up as usual. If you guys need a video I can take one later tonight, just let me know.

Jimvr4
12-09-2011, 01:58 PM
hid.dll error message on reboot - Microsoft Answers (http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/hiddll-error-message-on-reboot/22331782-3092-4cd2-9964-876ba1c307b1)

It is possible that a USB device that you have installed on your system has corrupted the HID.DLL file. This file is essential for processing interface devices. You may check the following KB article for a hotfix that replaces this file: A Bluetooth device is unavailable after you perform a suspend-and-resume operation in Windows Vista (http://support.microsoft.com/kb/945518)

Or if the above does not relate to your issue you may attempt any one of the following:

<><><><><><><><><><><><>

Run The System File Checker tool:

To determine whether the issue that you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool scans system files and replaces incorrect versions of the system files by using the correct versions.

To run the System File Checker tool, follow these steps:

1. Click StartCollapse this imageExpand this image, and then type cmd in the Start Search box.
2. Right-click cmd in the Programs list, and then click Run as administrator. Collapse this imageExpand this imageIf you are prompted for an administrator password or confirmation, type your password or click Continue
3. At the command prompt, the following line, and then press ENTER: sfc /scannow

When the scan is complete, test to see whether the issue that you are experiencing is resolved. If the issue that you are experiencing is not resolved, use the procedure that is described in the "The System Restore tool" section.

<><><><><><><><><><><><>

Do you know when you began receiving this error? You may attempt a system restore to the point where you last had a working boot procedure. Make sure that any USB devices you might have installed since then are monitored in case they generate the same error again, there could be a compatibility issue between it and your operating system.

Undo system changes with System Restore:

Turn back time on your PC&#58; Undo system changes with System Restore (http://windowshelp.microsoft.com/Windows/en-US/Help/0e3a6bed-e3fa-4d5e-8635-39d5b5ccfdaf1033.mspx)

<><><><><><><><><><><><>

If the above fails then you may choose reinstall your copy of Vista while keeping your files, settings, and programs by performing a repair installation or an upgrade installation.

1. Insert the Windows installation disc into your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

2. On the Install Windows page, click Install now.

3. On the Get important updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get installation updates.

4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key to help avoid problems during activation.

5. On the Please read the license terms page, if you accept the license terms, click I accept the license terms.

6. On the Which type of installation do you want? page, click Upgrade to begin the upgrade. You might see a compatibility report.

7. Follow the instructions.

Note: If your installation disk does not include SP1, and you are updated to it, then you will have to uninstall it before performing an upgrade install. Start -> Control Panel -> Programs -> View installed updates, then select Service Pack for Microsoft Windows and click Uninstall.

<><><><><><><><><><><><>

It is always advisable to backup any and all important data before proceeding with any major changes to your system. Methods for backing up your files: Methods for backing up your files (http://windowshelp.microsoft.com/Windows/en-US/Help/0625443e-f5c7-4bec-a5e3-3b7e00503c481033.mspx)

Always make sure you have a means of reinstalling your programs, either through an install disk or having access to the installation files.

<><><><><><><><><><><><>

Let us know your results. Thank you for using the Microsoft Vista Support Community.
Rami
Microsoft Answers Support Engineer
Visit our Microsoft Answers Feedback Forum and let us know what you think.

OBXBoost
12-14-2011, 07:37 AM
Have you tried the standard gamut of antivirus/antimalware tools?

Malwarebytes
Superantimalware
Spybot
Ad Aware
Combofix (at least on x86 OS's)
I'd also download and install the free trial of AVG ANTIVIRUS only, not the Internet Security Suite and have it do a complete scan.

Usually these are the first things I will use once I also start seeing driver errors just to be sure.

mb3000
12-14-2011, 09:26 AM
Yes, I use MB frequently as well as others. I manually repaired the DLL file and everything appears to be working as it should. Although I still have the clutter that a factory image restore would have gotton rid of, I'm not too worried about it.