PDA

View Full Version : What parts



Miguel92.3000GT
11-23-2011, 01:37 AM
Hey guys I was wondering what parts off a twin turbo stealth can/should be switched over to an N/A 3000gt. Just seeing what parts I should switch over. And its from a non running tt stealth.

skater334
11-23-2011, 02:21 AM
turbos, injectors, headers, smics w/ hoses and pipes, intake, things like that.

green-lantern
11-23-2011, 08:01 AM
http://www.3sgto.org/f19/tt-conversion-link-thread-292.html

This thread will be your best friend when doing a TT conversion

Edit: BTW what is wrong with the Stealth? If it has a spun bearing you will most likely not want to use the oil cooler.

Miguel92.3000GT
11-23-2011, 08:39 AM
Its wrecked, the car hit some trees and flip over. From what I see the smic's are no good, so the turbos have to wait. Mostly waned to know what things I should switch over without adding the turbo yet. By the way how much do stock 360cc injectors cost used? And are n/a vc's the same as tt vc's.

green-lantern
11-23-2011, 02:51 PM
Its wrecked, the car hit some trees and flip over. From what I see the smic's are no good, so the turbos have to wait. Mostly waned to know what things I should switch over without adding the turbo yet. By the way how much do stock 360cc injectors cost used? And are n/a vc's the same as tt vc's.

Why wait? You can get stock IC's cheap. Also stock 360cc injectors are cheap. The only reason to wait is because you don't have something else to drive while you do it. To do it right there is a good bit you should take into consideration so read, read and read some more. That thread really does have every bit of info you need.

BTW you really cant switch anything over until you're ready to do it. Gather all the parts up before you start or the car could be down for months.

Also I have a custom exhaust I can sell you that was built just for a TT conversion.

Miguel92.3000GT
11-23-2011, 03:19 PM
I pretty much have everything i need, except for the IC. I dont know if I should just get the SMIC's or a FMIC. But the biggest part is the secondary car. I have one but I just replaced the transmission and having some difficulty getting it to start. I just want to work on the car, being that Im laid off till mid January and it gets boring just being at the house. You have any pics of that exhaust?

green-lantern
11-23-2011, 04:21 PM
I pretty much have everything i need, except for the IC. I dont know if I should just get the SMIC's or a FMIC. But the biggest part is the secondary car. I have one but I just replaced the transmission and having some difficulty getting it to start. I just want to work on the car, being that Im laid off till mid January and it gets boring just being at the house. You have any pics of that exhaust?

Do you have the whole car (stealth TT)? Can you get the injectors from it? If you get a front mount then you'll have to get the piping also so if you are on a budget then getting the SMIC's is the way to go. Not to mention if you are using the NA 10:1 engine you cant really run big turbos or high boost so stock IC will be fine. You will get great power from 10:1 on 8 pounds of boost though. Enough power you won't have any traction in 1st-3rd gear, you will kick ass on the interstate though.

I would try to get that other car going before I started to do this. There is always something you don't have, crush washers, gaskets etc.

http://i123.photobucket.com/albums/o310/hptech4564/done.jpg

http://i123.photobucket.com/albums/o310/hptech4564/doneback.jpg


http://s123.photobucket.com/albums/o310/hptech4564/?action=view&current=DSCF6622.mp4

green-lantern
11-23-2011, 04:26 PM
Not sure if that video will work for you or not.

Miguel92.3000GT
11-23-2011, 06:18 PM
Yeah i have the whole car. I was leaning more towards the SMIC's. But youre right. First I need to fix the grand am before i mess with the 3kgt. But ill get to it eventually, and when I do I'll pm you on that exhaust. :)

green-lantern
11-23-2011, 07:47 PM
Yeah i have the whole car. I was leaning more towards the SMIC's. But youre right. First I need to fix the grand am before i mess with the 3kgt. But ill get to it eventually, and when I do I'll pm you on that exhaust. :)

Good move, get the other car reliable then start this project. If you are decently mechanically inclined you can do this. I'll tell you what, I've done the TT conversion and the AWD conversion but 10:1 FWD is VERY fun. The torque steer is brutal lol