View Full Version : is my master slave going out?
Sin'sVr4
11-22-2011, 12:37 AM
ok, well I put in a new clutch and TOB about 2 months ago. well, the TOB sounds like a belt...you know what sound im talking about...squeaking. So, my clutch was engaging lower and lower to the floor to where now i push the clutch all the way to the floor, give it gas and it will slightly move. clutch feels stiff still.
so is this a sign that my master slave is going bad or "is" bad? If so are they hard to replace and anyone have one?
Mike
futurevr4man
11-22-2011, 09:41 AM
if the master goes bad, your pedal will go to the floor and the clutch wont work. you can adjust it if you contort your body underneath the dash.
they are not fun to replace
B-Man
11-22-2011, 09:42 AM
Sounds more like your clutch settling. Adjust your pedal.
Valhallaz
11-22-2011, 09:45 AM
If you're losing fluid, then prolly a bad slave cyl. If so, you should see fluid leaking from it. Slave isn't real hard to replace, give yourself an hour or so. You'll want to adjust the pedal for free play when you're finished.
If it's the master losing fluid, you'll normally find a wet carpet just below the master. ANd it's a pain to replace. Lotta tight things...
If you're losing no fluid, try adjusting the pedal.
Sin'sVr4
11-22-2011, 04:23 PM
how do u adjust the pedal? the fluid is fine. just checked it
DocWalt
11-22-2011, 04:32 PM
What's a master slave?
Check out this video for the adjustment procedure:
http://www.youtube.com/watch?v=1EkJKjfIQ9A
Make sure you use the turbo adjustment specs, not the Non-Turbo specs
Sin'sVr4
11-22-2011, 05:01 PM
sweet doc, im gonna try this this weekend. where is the turbo specs? NA said .5 inch and im running a stage 4 clutch?
I looked on stealth316 in the manual and it doesnt show differentiated specs or really what the travel distance is for that matter? section 6-2 thru 6-4 of the 1991 stealth manual.
DocWalt
11-22-2011, 05:42 PM
If you don't find them, I'll look when I get home.
stealthee
11-22-2011, 05:47 PM
Spec for clutch pedal travel is in the owners manual. If it werent downpouring right now I'd go to the car and look it up
DocWalt
11-22-2011, 10:14 PM
AWD spec for clutch play is .49-.79 in.
skater334
11-23-2011, 02:25 AM
Did you check the fluid level in the clutch master cyl.? Same thing happened to me and it was bone dry.
shmoo
11-23-2011, 02:47 AM
you could always just replace your slave cylinder. mine came with a lifetime warranty from oreiley's. i replace it whenever i mess with the transmission.
goooood luck!
_isiah
Sin'sVr4
11-23-2011, 08:52 PM
res was almost full. i will try to adjust it when i get a chance. was freezing cold last week so didnt even try driving it. this week was warm but the clutch made me not want to drive it and my wife let me drive my audi all week since getting back from vegas. :) (note i said "she" let me drive "my" audi :) )i will adjust it and see what happens maybe tomm if i have a minute.
I watched the video from jack @ jacks transmissions. looks pretty cool
Sin'sVr4
11-25-2011, 09:38 AM
ok, well adjusted the pedal and wow. super stiff and is like a totally different car. no grinds, nothing! tried a launch and thing is soooo grabby now its crazy and got completely sideways down the road and left 4 long ass burn marks on the road :). alittle bit of a bitch to contort my big ass frame in that little space lol. 6"1, 240lbs is not easy to squeeze under the dash lol. Not to mention I have arms like gorillas lol. I readjusted it again last night one more time and its perfect now. Thanks to all who helped. It feels so nice to drive the car and i can actually hit 2nd gear now with no grinds or misses. amazing how the engagement was so low to the floor before this. Gonna be 60 degrees today so figured it will be a good time to drive her to work before it gets to cold and mmmm like butter
DocWalt
11-25-2011, 07:21 PM
Awesome. Sounds like maybe it was adjusted to the point where the master cylinder wasn't auto-adjusting the fluid level to compensate for clutch wear.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.