Boost Gauge - Where did you...

[$$$PIT]

I'm getting ready to install my boost gauge in my A-pillar. Before I start I thought I would get some input on where everyone ran their wire for their light in the gauge and also where they went through their firewall with the boost line. I'll be connecting the line on the back of the plenum. LMK

[futurevr4man]

i went through the grommet on the drivers side through the firewall. the light was setup off the center console somewhere

[$$$PIT]

Got it all finished. Looks like I'm at about 7lbs. boost, which I believe is stock. So I turned it up just a bit. :DevilSmile: