PDA

View Full Version : Cutaway of a TD04 Turbo. Pics iniside!



92RT-TT
11-14-2011, 10:24 PM
The other day I was looking for something to put on the office counter so customers would have something interesting to look at aka play with while waiting for Deborah to finish up an invoice or whatever so I got to thinking it would be cool to have a cutaway of a turbo with a little stand and a plaque explaining what all the parts are.

I haven't made the stand or the plaque and I still need to cut a compressor cover and put that on (wont happen for awhile, too many jobs to finish up now that we're back), but for now here's what it looks like so far :). This only took me about 5 minutes to cut and about 5 minutes to put together. The oil feed lines are all colored red.

I think once I get the comp cover cut and put on it'll look really cool. I actually showed a local shop these pictures and he's paying me to do this to one of his K03 cores so he can have a cool display on his counter too. Haha new business venture for MTC maybe? ;)

http://i173.photobucket.com/albums/w56/hemidartguy/6821007c.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/0312cc49.jpg

I took a DSM compressor cover and cut that too :D
http://i173.photobucket.com/albums/w56/hemidartguy/34c68a3b.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/afb23376.jpg

rawavr4
11-14-2011, 10:35 PM
That's so cool. I kind of want one , but I have nowhere to put it.

J. Fast
11-14-2011, 11:01 PM
Fun, I love cutaways :). How big is the journal from the supply inlet to the thrust collar and bearing? After looking at it, could there be any benefit to increasing the journal diameters?

CoopKill
11-14-2011, 11:04 PM
Cool! Looks so much better than in print.

mb3000
11-14-2011, 11:05 PM
What's the price for one? :suspect:

92RT-TT
11-14-2011, 11:58 PM
Fun, I love cutaways :). How big is the journal from the supply inlet to the thrust collar and bearing? After looking at it, could there be any benefit to increasing the journal diameters?

I looked for hours trying to find a cutaway and finally I decided if I want one I'm just going to have to make it myself haha. I dont know if you'd really have much benefit to increasing the journal bearing size, when you use a quality bearing there really isn't an issue with failure. I think the larger bearings would change where the feed lines land on the bearing and it wouldn't coincide with the wholes in the bearings which could cause the bearings to starve for oil.


What's the price for one? :suspect:

Haha well it wouldn't cost too much other then the "cost" of the turbo and a bit of labor for cleaning it, bead blasting, painting, cutting it, and re-assembling it. If someone sent me a complete turbo I could definitely do a cutaway for them. Probably the thing that would take the longest is all the cleaning of each individual part and blasting it. :coo3l:

AdamVR4
11-15-2011, 02:18 AM
Right click + Save As ... Thank you! These will go into my long-term collection for sure :)

j2k4
11-15-2011, 09:18 AM
A simple thing, but uber-informative.

Thanks, Dan.

92RT-TT
11-15-2011, 12:09 PM
Glad you guys like it :). Once I finish it I'll post up some more pictures. I think It will look really cool once its got a cutaway of a compressor cover on it and the stand.

green-lantern
11-15-2011, 01:27 PM
That's pretty damn cool man!

AdamVR4
11-15-2011, 01:39 PM
Glad you guys like it :). Once I finish it I'll post up some more pictures. I think It will look really cool once its got a cutaway of a compressor cover on it and the stand.

Yeah, a cutaway compressor cover (and turbine housing) would be amazing! Why go half way? :)

92RT-TT
11-15-2011, 02:04 PM
Haha well comp covers and bearing housing are easy to come by, turbine housings are harder to get :/. We have 20+ spare bearing housings and probably 30+ comp covers but no spare turbine housings (that aren't being used for an upgrade already).

AdamVR4
11-15-2011, 02:05 PM
Haha well comp covers and bearing housing are easy to come by, turbine housings are harder to get :/. We have 20+ spare bearing housings and probably 30+ comp covers but no spare turbine housings (that aren't being used for an upgrade already).

Oh, I guess they're not as plentiful as cracked 14B turbine housings ;)

Either way, you got the part of the turbo that most of us never see, so thank you.

92RT-TT
11-15-2011, 02:07 PM
Oh, I guess they're not as plentiful as cracked 14B turbine housings ;)

Either way, you got the part of the turbo that most of us never see, so thank you.

Haha never even thought of that, we have tons of the DSM turbine housings that are cracked so I could definitely use one of those. Good idea Adam! :)

FeaRpb
11-15-2011, 02:40 PM
How much would you charge if I sent in a used 9b? lol

AdamVR4
11-15-2011, 03:16 PM
How much would you charge if I sent in a used 9b? lol

Hilarious if they could turn sectioning turbos into a profit-earning portion of their business. I know I'd like one :)

92RT-TT
11-15-2011, 07:32 PM
How much would you charge if I sent in a used 9b? lol

Let me think about this, from cleaning, dis-assembly, cutting,, painting, and re-assembly, its not a super quick process but it's not too bad. Let me ponder this tonight and I'll let you know haha :).


Hilarious if they could turn sectioning turbos into a profit-earning portion of their business. I know I'd like one :)

Cutaway turbos make great Christmas gifts for that turbo enthusiast! Act now supplies are limited and if you call within the next 10 minutes... oh wait I sound like an infomercial haha :D

green-lantern
11-15-2011, 07:51 PM
Hilarious if they could turn sectioning turbos into a profit-earning portion of their business. I know I'd like one :)

I got an LMI turbo to cut up :lo5l: All the stuff would probably fall out though.

MR2
11-15-2011, 09:22 PM
Can you cut open the stuff around the thrust bearing? keen to see how that works

FeaRpb
11-15-2011, 10:39 PM
Let me know, I will pull one of mine and send it to you. I need something for my desk at work lol.

92RT-TT
11-16-2011, 12:39 PM
I got an LMI turbo to cut up :lo5l: All the stuff would probably fall out though.

Haha even as a model it would fail lol ;). Actually you should totally send one to me, cutting one of those up so it could never be used on a car again would be doing the automotive world a favor haha.


Can you cut open the stuff around the thrust bearing? keen to see how that works

That would be a bit more work then what I did here but its not impossible. If someone sends me one to do and they want that done I'll do it to their specifications.


Let me know, I will pull one of mine and send it to you. I need something for my desk at work lol.

I'm thinking to do one like I just did, it would take about an hour with the dis-assembly, cleaning, blasting the housing, painting it, and re-assembling so at our hourly rate I could do one for 65 dollars. If you want the comp cover and turbine housings cut that will add more time to it so you may be closer to 100 for a complete Comp cover, CHRA, and turbine housing cutaway. Let me know if you wanna do one.

Haha kinda funny but a guy from a local shop came and picked up a turbo we did for them and saw the cutaway so now I've got two shops that are having me do a cutaway for them :D.

terrets
11-16-2011, 01:12 PM
Very cool. I never thought about how the oil got around or anything. Thanks for the view!

FeaRpb
11-16-2011, 02:18 PM
I will let you know when I get mine pulled.

92RT-TT
11-17-2011, 01:52 AM
Tonight I had a few minutes in between welding some stuff so I decided to cut a compressor cover. Enjoy :)
http://i173.photobucket.com/albums/w56/hemidartguy/34c68a3b.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/afb23376.jpg

MR2
11-17-2011, 03:42 AM
wow! amazing how close everything is

Boomer3000
11-17-2011, 04:31 AM
Hell yea I want one of those lol... I might be coming up with ABM to pick up that car.. HMMMM we will talk lol

92RT-TT
11-17-2011, 09:24 AM
Glad you guys like it :).

Sounds good boomer!

AdamVR4
11-17-2011, 01:14 PM
At least with the cover on, you can stand it on your desk on the compressor inlet :)

92RT-TT
11-17-2011, 04:54 PM
Thats true, although I do want to make a nice little stand for it eventually. It'll look good next to the RC injector display they are sending us (we just became a dealer for them) :D.

GTOJOE
11-17-2011, 07:54 PM
Not sure if this makes sense but I was wondering if there would be any gains to be made by machining some of the housing away to make the gap between the cartridge and the housing bigger and then increasing the wheel height on the lower step. Or is it pointless on small turbo like the TD04?

The circled areas.
http://i299.photobucket.com/albums/mm289/1STGENGTO/TD04cutaway2.jpg

92RT-TT
11-18-2011, 01:01 AM
On the bigger sized turbos like the 19T that is actually machined out because the tip height is increased. On a 19T the tip height (the part you circled) is 1.1 mm taller then the 9B so the housing does need to be opened up there.

shmoo
11-18-2011, 02:49 AM
that is pretty sweet, but i don't see the parts list diagram.

really more of a turbo than i have ever seen before.

_isiah

92RT-TT
11-18-2011, 09:08 AM
that is pretty sweet, but i don't see the parts list diagram.

really more of a turbo than i have ever seen before.

_isiah

I'll be doing a little diagram soon hopefully, this is just kind of a little side project to our normal rebuilds and upgrades. :D

Jesters Deadd
11-21-2011, 06:19 PM
Really cool, but are you missing the turbine heat shield plate?

92RT-TT
11-21-2011, 07:13 PM
Really cool, but are you missing the turbine heat shield plate?

Yeah I dont have the turbine side piston ring, the heat shield, or the seal plate and comp cover o-rings on. I didn't put the heat shield on because it would have blocked part of the turbo and I wanted people to be able to see more of the internals.

Jesters Deadd
11-22-2011, 11:49 AM
Yeah I dont have the turbine side piston ring, the heat shield, or the seal plate and comp cover o-rings on. I didn't put the heat shield on because it would have blocked part of the turbo and I wanted people to be able to see more of the internals.

What if you cut the lip off the heat shield where you cut the rest of the turbo so you could still see. Or just cut a pie shaped piece out but leave the hole in the plate so it wont come off. Will the seal plate get in the way to see?

92RT-TT
11-22-2011, 11:56 AM
What if you cut the lip off the heat shield where you cut the rest of the turbo so you could still see. Or just cut a pie shaped piece out but leave the hole in the plate so it wont come off. Will the seal plate get in the way to see?

I could maybe cut the lip of a heat shield but yeah if I cut a 1/4 out of it like everything else it would fall off. The seal plate is in there its just the seal plate o-ring and the comp cover o-ring that aren't in there.

gs1000kat
11-22-2011, 02:42 PM
Really cool, but are you missing the turbine heat shield plate?

Must be a Turbo Bob rebuild, lol

92RT-TT
11-22-2011, 04:38 PM
Must be a Turbo Bob rebuild, lol

lol :lol:

kazevr4
11-22-2011, 06:19 PM
Im curious as to if you have a coolant leak in the turbo will it go into your intercooler pipes ? not on my VR4, but on a DSM im working on. I figure its kind of on topic as this shows the internals of a turbo. I just got it running and saw some moisture coming out of an intercooler pipe conection, took it apart and there was some water or coolant, not 100% if it was condensation built up bad some how or if coolant is somehow getting in there. Thanx for any input.

Cool project by the way. Helps to understand what all is going on in there, I am a very visual learner.

92RT-TT
11-22-2011, 09:05 PM
Unless your bearing housing actually had a crack in it there shouldn't be any way for coolant to get into the intercooler piping from the turbo

kazevr4
11-23-2011, 03:12 PM
Thanx. I'm thinking it was just condensation, that helps alot

92RT-TT
11-24-2011, 04:05 AM
No problem :)