View Full Version : ...some TD04 teaser pics from MTC... ;)
92RT-TT
11-06-2011, 08:54 PM
It's not pictures of the Billet TD04 wheels... yet... but it is pictures of the custom turbine shaft for our Billet TD04 project that is in the works :coo3l:.
Size wise it is the same as a TD04HL but it features 9 blades instead of 12. Weight wise this shaves roughly 35 grams off the weight or 23% off the weight of the 12 Blade TD04HL shaft.
I believe going from a standard TD04HL shaft to a Titanium Aluminide turbine shaft shaves off about 55 grams so these are not as much weight savings as that, but 23% is very significant regardless. The 9 blade design with 8 degrees of clipping makes for a very high flowing and good spooling turbine wheel. Also notice the center nut and post is much smaller then the standard TD04HL, which allows us to have slightly more blade surface area per blade then the standard shaft.
We have 3 Compressor Wheels we are planning to release in Billet. Our first and the easiest to do will be a 19T billet wheel (that we should have ready in about a month). We plan on this being the exact size as a standard 19T so anyone with 19T turbos could upgrade to these. Our other two wheels will be the same wheel designs as our TD05's (Twin 5 blade and Twin 7 Blade) but shrunk down proportionally to TD04 sizes.
So without further ado, here are a few pics of the new turbine shafts.
http://i173.photobucket.com/albums/w56/hemidartguy/6f422e27.jpg
12 Blade TD04HL Turbine Shaft
http://i173.photobucket.com/albums/w56/hemidartguy/7316eb42.jpg
9 Blade TD04HL Turbine Shaft
http://i173.photobucket.com/albums/w56/hemidartguy/0c819c55.jpg
mb7050
11-06-2011, 09:00 PM
mmm Nice ! Can't wait for the results
R/T93
11-06-2011, 09:22 PM
F yes
all this fancy turbine :p and look at the old scales :p
CoopKill
11-06-2011, 09:39 PM
Still patiently waiting for the top of the MTC chain td04 info....
green-lantern
11-06-2011, 09:43 PM
I might be interested in this. I have IPS 19THL's and I should be going back to the dyno very soon. If you want to do a deal sort of like what you are doing with the TDO5's I would be very interested.
J. Fast
11-06-2011, 09:48 PM
LOL, could you set it up any better... Not legal for trade?
mb3000
11-06-2011, 10:06 PM
So exciting!
ChargerX3
11-07-2011, 01:01 AM
Crack scale FTW!
mehrshadvr4
11-07-2011, 01:08 AM
i don't know much about turbos and yet i could tell yours can flow much better than the older oem ones.
2fnloud
11-07-2011, 09:38 AM
Still patiently waiting for the top of the MTC chain td04 info....
^^^^
This
Midwest Turbo Connection
11-07-2011, 10:13 AM
Dan has been working on getting all the billet Td04 information together. The Td05 program has kept him fairly busy though :)
Chris@Rvengeperformance
11-07-2011, 12:16 PM
custom? The 9 blade turbines have been on ebay for a long time. Are yours different?
92RT-TT
11-07-2011, 02:28 PM
custom? The 9 blade turbines have been on ebay for a long time. Are yours different?
I don't really bother to check ebay to see what they have available because we don't use anything from off eBay. 99% of the turbo parts you can get off eBay are absolute trash. We contacted a manufacture and asked them make us a 9 blade TD04HL shaft. Now whether they got the design from a preexisting design or what I couldn't tell you, but they are being made for us per our specifications so yes that would make them custom. They sent us a sample batch that were not clipped and after brainstorming about the design and how we wanted them to perform, we decided we wanted an 8 degree clip so now they send us all our 9 blades with an 8 degree clip.
Chris@Rvengeperformance
11-07-2011, 03:25 PM
Kinugawa Turbo?
92RT-TT
11-07-2011, 05:03 PM
Nope, we're NOT dealing with any taiwan or china based companies :). You know most companies don't go spilling the beans as to what manufacture they get their parts from. Suffice it to say we don't deal with China or Tiawan parts, we pick who we get parts through, and we are confident in the quality of our parts which is why we have a 1 year warranty on all our turbos including performance turbos. :)
Sin'sVr4
11-07-2011, 05:07 PM
ya baby! kinguwa = really really really bad. MTC = bomb ass punani. Lol, sry Dan, just felt like throwing my 2 cents in ;). BTW my car is screaming now :) God i wish winter wasnt here :( These look sick! I might have to go billet TD05!
Chris@Rvengeperformance
11-07-2011, 05:09 PM
Kinugawa is Japanese
mb7050
11-07-2011, 05:31 PM
IDK but
Turbo Compressor Wheel Mitsubishi TD04HL 19T VOLVO SAAB | eBay (http://www.ebay.co.uk/itm/Turbo-Compressor-Wheel-Mitsubishi-TD04HL-19T-VOLVO-SAAB-/130405192327?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e5cc15287#ht_956wt_1031)
...
KINUGAWA TURBO
Sachiko Lu
7F., No.166, Yule Rd.,
540 Nantou City, Nantou County
臺灣 = Taiwan
92RT-TT
11-07-2011, 05:32 PM
ya baby! kinguwa = really really really bad. MTC = bomb ass punani. Lol, sry Dan, just felt like throwing my 2 cents in ;). BTW my car is screaming now :) God i wish winter wasnt here :( These look sick! I might have to go billet TD05!
Haha thanks! Glad its screaming now! We got some more stickers made so I'll send ya a matching one for the other side :) Our Billet TD05's would absolutely scream being you already made 550 whp with our 19Ts. Just imagine the power :D
Kinugawa is Japanese
Oh ic, I thought I remembered looking into their company and they were based out of Taiwan with a distribution center in Japan. Either way, we aren't using them nor do we plan to :)
Chris@Rvengeperformance
11-07-2011, 05:32 PM
This add shows Japan:
Turbine Wheel Upgrade TD04HL 9 Blades VOLVO S70 850 Light Weight Spool Faster | eBay (http://www.ebay.com/itm/Turbine-Wheel-Upgrade-TD04HL-9-Blades-VOLVO-S70-850-Light-Weight-Spool-Faster-/110761228508?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19c9e238dc)
You guys need to chill out. I'm sure these are good turbos, but they aren't making them out of sticks and stones in the basement.
You guys act like there are dozens of companies making 9 blade TD04-HL mitsubishi turbine wheels.
mb7050
11-07-2011, 05:39 PM
yeah they are trying to look like a Japanese company..The company is based on Taiwan
http://maps.google.fi/maps?hl=fi&rlz=1C1DVCL_enFI423FI423&q=540+Nantou+City,+Nantou+County&gs_upl=67015l67015l8l67827l1l1l0l0l0l0l63l63l1l1l0&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1133&bih=534&um=1&ie=UTF-8&hq=&hnear=0x346931912439ed39:0x6300e6fd5812b10b,Nantou +City,+Nantou+County,+Taiwan&gl=fi&ei=tFC4TpjsK8jV4QTLyu3TAw&sa=X&oi=geocode_result&ct=title&resnum=1&ved=0CBoQ8gEwAA
Chris@Rvengeperformance
11-07-2011, 05:41 PM
yeah they are trying to look like a Japanese company..The company is based on Taiwan
ok, so where are MTC's turbo wheels made? I don't mean who they buy them from, where are they actually cast?
AdamVR4
11-07-2011, 06:08 PM
The 9 blade turbine seems superior to the 12 blade in every way. What's the catch? There has to be a sacrifice in spool-up, right? But that's partially offset by the improved moment of inertia of the rotating assembly. Why weren't they 9 blade from the factory?
Chris@Rvengeperformance
11-07-2011, 06:10 PM
the way matt put it, less blades will help flow, but may hurt spool because there is less to "catch the air".
Don't know myself, but would love to see results. Should be similar to going to a larger a/r, because the exhaust has more space to go around the wheel, but I'm no expert.
I'd be keen for flowbench results too
92RT-TT
11-07-2011, 06:21 PM
IDK but
Turbo Compressor Wheel Mitsubishi TD04HL 19T VOLVO SAAB | eBay (http://www.ebay.co.uk/itm/Turbo-Compressor-Wheel-Mitsubishi-TD04HL-19T-VOLVO-SAAB-/130405192327?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e5cc15287#ht_956wt_1031)
...
KINUGAWA TURBO
Sachiko Lu
7F., No.166, Yule Rd.,
540 Nantou City, Nantou County
臺灣 = Taiwan
That's what we found too. Which is why we didn't give them a second look once we saw that.
AdamVR4
11-07-2011, 06:25 PM
the way matt put it, less blades will help flow, but may hurt spool because there is less to "catch the air".
Don't know myself, but would love to see results. Should be similar to going to a larger a/r, because the exhaust has more space to go around the wheel, but I'm no expert.
Shooting from the hip, undoubtedly over-simplifying... The average torque imposed on a 9 blade wheel by a given exhaust gas flow rate will be less because the maximum angle between the blade and the gas will be further from 90 degrees than with a 12 blade.
Shooting from the hip, undoubtedly over-simplifying... The average torque imposed on a 9 blade wheel by a given exhaust gas flow rate will be less because the maximum angle between the blade and the gas will be further from 90 degrees than with a 12 blade.
this. greater angle on the blades.
92RT-TT
11-07-2011, 06:35 PM
ok, so where are MTC's turbo wheels made? I don't mean who they buy them from, where are they actually cast?
Our billet wheels are made in the U.S.A. about 40 minutes from my house :D hehe. These particular turbine wheels are from Japan. Most that we use are from the following: US, UK, or Japan. However when we are looking into a manufacture, they have to meet several things we look for before we use their components. Particularly being ISO 9001 certified and we have them send us samples which we can test and see what kind of quality we're dealing with.
The 9 blade turbine seems superior to the 12 blade in every way. What's the catch? There has to be a sacrifice in spool-up, right? But that's partially offset by the improved moment of inertia of the rotating assembly. Why weren't they 9 blade from the factory?
Yeah they do seem like they would be superior in just about every way. Then again why did Mitsubishi use a 9B turbo in our cars. The B series wheel is one of the worst designed wheels in existence IMO. Its common knowledge with anyone that knows airflow that having 12 equal length blades is a much less efficient design then having staggered blades like the T and G series have for example.
the way matt put it, less blades will help flow, but may hurt spool because there is less to "catch the air".
Don't know myself, but would love to see results. Should be similar to going to a larger a/r, because the exhaust has more space to go around the wheel, but I'm no expert.
I think spool should actually not really be hurt. Its kind of hard to tell in the pictures but the curve of the blade is different then the 12 blade so it will probably offset the 3 less blades. For sure being 23% lighter will help it spool faster I would imagine.
I'd be keen for flowbench results too
Depending on our timeline (we're still finishing up our TD05's) we've got a company down in Iowa that could flow test them for us. Otherwise we'll just be getting a tester to see what these make, preferably someone who already had a 19T car that's been dyno'd so we can see the differences.
92RT-TT
11-07-2011, 06:38 PM
One other things with regards to the spool. These aren't our stage 3 billet TD05's we're talking about, these are going on Billet TD04's so I dont think spool will be an issue hehe :D
Sin'sVr4
11-07-2011, 06:54 PM
Depending on our timeline (we're still finishing up our TD05's) we've got a company down in Iowa that could flow test them for us. Otherwise we'll just be getting a tester to see what these make, preferably someone who already had a 19T car that's been dyno'd so we can see the differences.
oh oh (raises hand)
92RT-TT
11-07-2011, 07:04 PM
oh oh (raises hand)
It'd be a good comparison because you already have our turbos and have dyno'd them so we'd get to see how much more power the new parts make vs the old parts.
GTOJOE
11-08-2011, 07:51 PM
Nice work guys.......... now you just need to send me my free sample turbos and I'll be on my way :p
anyonebutme
11-09-2011, 08:03 PM
Its common knowledge with anyone that knows airflow that having 12 equal length blades is a much less efficient design then having staggered blades like the T and G series have for example.
Not so fast with this statement. I know of more than one case where given a set inducer, exducer, and height, where equal height blades shifted the entire map to the right. On top of that it also produces a quieter compressor. Garrett GTX series ALL have equal height billet compressors. Unfounded blanket statements such as this scare me when it comes to someone making a turbo I'd be interested.
92RT-TT
11-10-2011, 12:54 AM
Not so fast with this statement. I know of more than one case where given a set inducer, exducer, and height, where equal height blades shifted the entire map to the right. On top of that it also produces a quieter compressor. Garrett GTX series ALL have equal height billet compressors. Unfounded blanket statements such as this scare me when it comes to someone making a turbo I'd be interested.
There are always going to be exceptions to the rules but in general staggered aka splitter wheel blade designs are more efficient.
I'll take this straight out of an turbo design airflow book I have. "A full bladed wheel is rarely seen and is typically on slower speed turbo applications. The full bladed wheel is not recommended for high performance applications with high boost from high turbo speeds. While the full bladed wheel is believed to produce slightly higher pressure it tends to have trouble biting off enough air at high speeds. The splitter blade is the alternating shorter blade between each full blade. At higher speeds, the larger gap between the full blades is capable of biting off more air. Once taken inside the compressor wheel, the splitter blade helps to efficiently manage and compress the air as it is accelerated and turned radially to the axis of the rotation."
so yes... completely "unfounded" lol ;) :D
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.