View Full Version : Some Billet TD05 Teaser Pictures...
92RT-TT
10-27-2011, 02:21 AM
Just to whet your appetites here are a couple pictures of our Billet TD05 Turbos that we are introducing for 3S's :coo3l:.
In the next few days I'll be posting more pictures and information on them. We've got two people that will be testing them and once we get results back from them we will post those up and we'll see about starting a group buy for the first set of them.
This is our MTC 6954B turbo (This turbo has the smallest TD05 wheel we have)
http://i173.photobucket.com/albums/w56/hemidartguy/81ebc4ee.jpg
A stock Evo III 16G compared to our 69B comp wheel
http://i173.photobucket.com/albums/w56/hemidartguy/3cb3055b.jpg
Next to a stock Evo III
http://i173.photobucket.com/albums/w56/hemidartguy/83fb19b1.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/afce3dd4.jpg
VR-4 0wnz j00
10-27-2011, 04:21 AM
SO PRETTY! Bling bling!
GTOJOE
10-27-2011, 05:35 AM
turbo porn....... can't wait to see the TD04 version.
mb7050
10-27-2011, 07:33 AM
:love2:
i think i will have to get these. both compressor and turbine (which we're still waiting for pics on).
3kgtSL91
10-27-2011, 11:24 AM
looks hot! are these suppose to be better than FP 68HTAs?
Austin@STM
10-27-2011, 11:37 AM
Very interesting, once again you make me wonder what i should run in my car next year.
Turbos look great, keep up the good work. Cant wait to see the numbers that come from these!
AdamVR4
10-27-2011, 12:01 PM
How much are these going to cost? If you need another (or a better) test car, mine is a weekend away from running and I'm taking it to the track this winter. I'd love to replace my E16G's, hahaa... Safe to assume these require water cooling?
familyMAN
10-27-2011, 12:10 PM
Those look familiar:)
Adam these journal bearing.
AdamVR4
10-27-2011, 12:16 PM
Adam these journal bearing.
Right, but how does the manufacturer feel about not running water lines? ;)
familyMAN
10-27-2011, 12:27 PM
Right, but how does the manufacturer feel about not running water lines? ;)
True, I'll let them comment:)
92RT-TT
10-27-2011, 02:01 PM
looks hot! are these suppose to be better than FP 68HTAs?
These are our smallest of the 4 that we are going to be offering but even these should outperform the FP68HTA. The 68HTA's comp wheel I believe is 1 or 1.5 mm's smaller then our wheel and our design is brand new utilizing plenty of testing. It evolved over time as we tested different wheel designs and made changes to increase efficiency and power.
Very interesting, once again you make me wonder what i should run in my car next year.
Turbos look great, keep up the good work. Cant wait to see the numbers that come from these!
Thanks! Yeah we're excited to get some numbers from a 3S. All our testing so far has been on Evo and SRT-4's so it will be interesting to see how they respond to a smaller motor.
How much are these going to cost? If you need another (or a better) test car, mine is a weekend away from running and I'm taking it to the track this winter. I'd love to replace my E16G's, hahaa... Safe to assume these require water cooling?
One of the biggest things that is going to affect the cost of these turbos is the price increase on new MHI TD05 turbos. Currently we can still get them for the old price but we will probably be losing our lower price pretty soon so that will raise the cost of our turbos.
We came up with a stage 1+ (MTC 6954B)(pictured in this thread), stage 2 (MTC 7659B), and stage 3 (MTC 8359B) plus one budget turbo you could call just a stage 1 (MTC 6949B). Prices will range from 1250 per turbo up to 2000 per turbo depending on the stage and what options are chosen (porting, polishing, clipping, anti-surge comp cover or standard etc). By our estimations and with what we’ve seen on our non 3S test cars we hope the Stage 3 should push 850+ whp.
Also to be able to offer these at a lower cost we plan to start a group buy on these once we have our dyno results back from our testers so we will be offering a discount based on how many people we get signed up and paid for with the initial offering.
I think right now we are pretty much covered with our Stage 1 and 2 testers. We've got Familyman testing our stage one and another undisclosed person testing both our stage 1 and stage 2. We dont have anyone testing stage 3 yet but you'd need to have a car capable of handling 800+ whp if you wanted to be the Stage 3 tester :).
Right, but how does the manufacturer feel about not running water lines? ;)
We recommend water lines. With all our turbos they come with a one year warranty but in order for the warranty to be valid you need to run water lines.
i think i will have to get these. both compressor and turbine (which we're still waiting for pics on).
More pics to come soon, this was just a teaser hehe :)
AdamVR4
10-27-2011, 03:27 PM
So what kind of power are you expecting from the stage 1 and stage 1+ turbos?
92RT-TT
10-27-2011, 04:09 PM
So what kind of power are you expecting from the stage 1 and stage 1+ turbos?
It’s hard to say exactly what they will do on a 1.5L but on a 2.0L going from a stock 16G to our stage 1+ we had a 200 awhp increase in power (there’s a dyno chart on one of the old threads I made about this). If that were the case with a 3S with two of them I would say our stage 1+ should make at 700+whp.
On that same test car our stage 2 turbo made 300 whp more (these tests were all on an Evo), and our stage 3 turbo made 650 awhp so 400 whp more then the stock 16G baseline run. Now on a more wildly modified Evo, upgraded cams, heads, E95, etc our stage 3 made 780 awhp.
To make a direct comparison between how much hp increase the evo saw vs. what a 3S will see is like comparing apples to oranges, but just based off the % increase from one stage to another we estimate stage 1+ to make 700+, stage 2 750-850, and stage 3 850+ hp. A lot of it comes down to what mods the person is running too, I know someone who made 688 awhp with 16G’s, now someone like that could probably make over 1000 awhp with our stage 3’s but someone with less mods might only make 850 whp.
Just to give you an idea on size difference between a stock evo compressor wheel, our stage 1, and our stage 3... our stage 3 is 14mm’s bigger then our stage 1 and 24mm bigger then a stock 16G.
Oh and I would estimate probably about 30-40 awhp less and 50 or so awtq less with a stage 1 vs the stage 1+.
92RT-TT
10-27-2011, 04:15 PM
turbo porn....... can't wait to see the TD04 version.
Haha that it is :D. We'll be finished with our first set of Billet TD04 wheels in about a month. We've already got our 9 Blade HL turbine shafts ready and waiting to go :coo3l:
3kgtSL91
10-27-2011, 04:15 PM
These are our smallest of the 4 that we are going to be offering but even these should outperform the FP68HTA. The 68HTA's comp wheel I believe is 1 or 1.5 mm's smaller then our wheel and our design is brand new utilizing plenty of testing. It evolved over time as we tested different wheel designs and made changes to increase efficiency and power.
than, i'll take the bigges td05 turbos you guys make whenever they are available (stage 3 i guess)... will be a good pair for my 3.5 motor)
3kgtSL91
10-27-2011, 04:18 PM
Haha that it is :D. We'll be finished with our first set of Billet TD04 wheels in about a month. We've already got our 9 Blade HL turbine shafts ready and waiting to go :coo3l:
i have a set of dr-750s wiaitng on the shelf for my td04 setup, will yours perform better?))
92RT-TT
10-27-2011, 04:34 PM
If they dont we'll keep making changes to the wheel design until they surpass them. That is what we did with our TD05 wheels, we tested them against competitors and kept modifying and making changes to the wheel design until we were able to achieve at least 8-10% better performance then our competitors similar sized turbos.
We plan to take what we learned on our TD05 wheel and bring that to our TD04 wheels. I could be wrong but you'll be seeing what I believe are the first ever twin 5 blade and twin 7 blade billet compressor wheels for the TD04 frame turbos.
lparrill
10-27-2011, 05:37 PM
Damn, you're making it awfully hard to bite the bullet on some DR750's with this waiting in the wings.
Great job!! I guess I'll have to wait a little while longer to make a turbo decision
FeaRpb
10-27-2011, 06:10 PM
If/When the Compressor Wheel is made for the td04. Can you put it in my dr750 housing?
(That is if it makes more power)
familyMAN
10-27-2011, 08:01 PM
I think it's interesting that there is so much interest in a new billet td04 when we already have many options...billet 19t, billet DR650, DR700 and DR750.
Now, Billet td05's that will hopefully perform very well on a 3S is new and exciting:)
lparrill
10-27-2011, 10:40 PM
We're always looking for a better, more efficient turbo (I'm more-so waiting to see if the DR750 can be outdone)
I'm still not quite convinced I'm stay TD-04 yet so I'm waiting for results on these billet TD05's
92RT-TT
10-27-2011, 11:47 PM
Damn, you're making it awfully hard to bite the bullet on some DR750's with this waiting in the wings.
Great job!! I guess I'll have to wait a little while longer to make a turbo decision
Thanks! Hopefully once we get our dyno results we'll be convincing alot of people to go this route :D
If/When the Compressor Wheel is made for the td04. Can you put it in my dr750 housing?
(That is if it makes more power)
Yes we could do the swap as long as our compressor wheel is the same size or bigger then the DR750. Out of curiosity, what size is the inlet on your DR750? What about the compressor wheel inducer? I'm just wondering if our wheel will end up being slightly bigger or the same size as the DR750's.
I think it's interesting that there is so much interest in a new billet td04 when we already have many options...billet 19t, billet DR650, DR700 and DR750.
Now, Billet td05's that will hopefully perform very well on a 3S is new and exciting:)
We agree Eric! Haha we're pretty excited about seeing how these Billet turbos perform on a 3S!
We're always looking for a better, more efficient turbo (I'm more-so waiting to see if the DR750 can be outdone)
I'm still not quite convinced I'm stay TD-04 yet so I'm waiting for results on these billet TD05's
We'll be getting stage 1+ results from Familyman and another tester is testing both stage 1+ and then stage 2 back to back so we'll have plenty of dyno results for everyone
Here's a couple more pictures of Eric's turbos
http://i173.photobucket.com/albums/w56/hemidartguy/9fbc765d.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/67683782.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/76d79458.jpg
Turbine Housing Machined for stage 1+ wheel vs a stock TD05H
http://i173.photobucket.com/albums/w56/hemidartguy/6fdbe11a.jpg
Ported vs an unported so people can see the difference
http://i173.photobucket.com/albums/w56/hemidartguy/b7399ff7.jpg
familyMAN
10-28-2011, 12:18 AM
They look awesome! Can't wait!
Someone needs to make a basic TD05 Log :) not as bad as a log, but no equal length..make it simply thick iron..make it with heatshields... make easy hidden external gates..
mb3000
10-28-2011, 01:32 AM
Wow, can't wait to see results!
guido1205us
10-28-2011, 01:36 AM
Will be interesting to see when these start spooling up. As I understand it, TD05 16g spool around 4500? So really, a good match with these turbos really are 3.5 strokers? Anything in the work to do billet/titanium like dr750, and would that even help with lag?
Was planning on staying td04 dr650/dr750 myself, but there are valid arguements to be made with going td05 and running less boost in order to get the same awhp as the dr650/750s, just don't know if I can live with the lag.
92RT-TT
10-28-2011, 01:59 AM
Will be interesting to see when these start spooling up. As I understand it, TD05 16g spool around 4500? So really, a good match with these turbos really are 3.5 strokers? Anything in the work to do billet/titanium like dr750, and would that even help with lag?
Was planning on staying td04 dr650/dr750 myself, but there are valid arguements to be made with going td05 and running less boost in order to get the same awhp as the dr650/750s, just don't know if I can live with the lag.
They should spool sooner then 4500. On my 92 VR4 with stock 16G's I wanna say I was making 20-22+psi at 3500 rpm.
The stage 3 on the other hand will spool slower of course because its huge, but that isn't for the faint of heart, its for people who want to make massive power! On a 2.0L it was hitting 25 psi by 3800 rpm which isn't bad considering how big it is so it will be interesting to see when it spools on a 1.5-1.7L.
than, i'll take the bigges td05 turbos you guys make whenever they are available (stage 3 i guess)... will be a good pair for my 3.5 motor)
really says something when the guy who is having ALL his work done at IPS isn't buying IPS billet 16g's. guess it's a good thing i'm holding out as well.
p.s.
in before matt pops in and starts badmouthing MTC & calling BS on their turbos.
niterydr
10-28-2011, 10:37 AM
Another individual popping in to see results, nice looking pictures ;)
thor'svr4
10-28-2011, 10:53 AM
im really liking the billet TD05's.
if you guys had to guess do you think the 1+ would perform similar to the Precision 3254e?
http://www.precisionturbo.net/turbochargers/entry-level-turbochargers/details/Entry-Level-Turbocharger---3254E/473
AdamVR4
10-28-2011, 11:26 AM
This sure puts your prices into perspective.
Mitsubishi - Turbochargers.com (http://www.turbochargers.com/store/index.php/cPath/21_30?osCsid=14b1ffbe785baafa2fbb4dd184baf522)
Ballpark, if I sent you my E16G's, assuming you don't find anything out of the ordinary, what would you charge to rebuild them with stage 1 or stage 1+ comp wheels? I don't want more lag than I've got with E16G's and I want to make power more efficiently.
familyMAN
10-28-2011, 12:24 PM
Adam, you'll probably want the 1+, like I am getting, for the 11 blade turbine wheel. Supposed to be more efficient without hurting spool (too much).
92RT-TT
10-28-2011, 12:26 PM
im really liking the billet TD05's.
if you guys had to guess do you think the 1+ would perform similar to the Precision 3254e?
http://www.precisionturbo.net/turbochargers/entry-level-turbochargers/details/Entry-Level-Turbocharger---3254E/473
Looks like it has similar sizes for the comp wheel and turbine shaft, but I would guess ours is going to make more power. Our comp wheel and our turbine shaft design are what is going to make the difference.
Side note: I got a laugh out of this, they put "360 degree journal bearing system"... like there is any other kind of journal bearing out there... They only make 360 degree journal bearings, I'd love to see a journal bearing that wasn't 360 degrees haha.
This sure puts your prices into perspective.
Mitsubishi - Turbochargers.com (http://www.turbochargers.com/store/index.php/cPath/21_30?osCsid=14b1ffbe785baafa2fbb4dd184baf522)
Ballpark, if I sent you my E16G's, assuming you don't find anything out of the ordinary, what would you charge to rebuild them with stage 1 or stage 1+ comp wheels? I don't want more lag than I've got with E16G's and I want to make power more efficiently.
Yeah it does! Wow I hope our little supply of 16G's at the lower price holds out for a bit longer. Unfortunately the price jack by MHI will be something that comes into play in the future :/. We are planning to offer an upgrade service like we do with our TD04's right now where we will upgrade peoples existing TD05's (only MHI ones can be upgraded though, as we found out the knockoff ones you get in some of the kits have different journal bearing sizes, different piston ring seat size etc so none of our parts fit in them. We haven't looked into prices for upgrading peoples existing turbos yet on that so let me crunch the numbers and I'll get back to you.
AdamVR4
10-28-2011, 12:47 PM
Yeah it does! Wow I hope our little supply of 16G's at the lower price holds out for a bit longer. Unfortunately the price jack by MHI will be something that comes into play in the future :/. We are planning to offer an upgrade service like we do with our TD04's right now where we will upgrade peoples existing TD05's (only MHI ones can be upgraded though, as we found out the knockoff ones you get in some of the kits have different journal bearing sizes, different piston ring seat size etc so none of our parts fit in them. We haven't looked into prices for upgrading peoples existing turbos yet on that so let me crunch the numbers and I'll get back to you.
Great! Looking forward to it.
3kgtSL91
10-28-2011, 01:21 PM
really says something when the guy who is having ALL his work done at IPS isn't buying IPS billet 16g's. guess it's a good thing i'm holding out as well.
we don't actually have billet 16g's
we don't actually have billet 16g's
then wtf was jeff/brandon trying to sell me over the phone?
3kgtSL91
10-28-2011, 02:19 PM
probably FP 68HTAs
donniekak
10-28-2011, 09:15 PM
Looks like it has similar sizes for the comp wheel and turbine shaft, but I would guess ours is going to make more power. Our comp wheel and our turbine shaft design are what is going to make the difference.
Side note: I got a laugh out of this, they put "360 degree journal bearing system"... like there is any other kind of journal bearing out there... They only make 360 degree journal bearings, I'd love to see a journal bearing that wasn't 360 degrees haha.
Yeah it does! Wow I hope our little supply of 16G's at the lower price holds out for a bit longer. Unfortunately the price jack by MHI will be something that comes into play in the future :/. We are planning to offer an upgrade service like we do with our TD04's right now where we will upgrade peoples existing TD05's (only MHI ones can be upgraded though, as we found out the knockoff ones you get in some of the kits have different journal bearing sizes, different piston ring seat size etc so none of our parts fit in them. We haven't looked into prices for upgrading peoples existing turbos yet on that so let me crunch the numbers and I'll get back to you.
They were probably talking about upgrading the 270* thrust plate garrett t3's come with.
http://i408.photobucket.com/albums/pp170/donniekak/IMG0898-L.jpg
CoopKill
10-28-2011, 10:41 PM
Interested to see what the td04's do in performance and price point vs dr.
Interested to see what the td04's do in performance and price point vs dr.
Yes indeed, watching with great interest...
92RT-TT
10-29-2011, 03:03 PM
We're pretty excited to get the TD04's going too, but right now we're more excited about TD05's ;).
Here's a few more pics I hadn't uploaded the other day of Familyman's MTC 6954B (stage 1+) turbos.
http://i173.photobucket.com/albums/w56/hemidartguy/52afae55.jpg
notice the sacrificial 19T wheel that is propping the one turbo up (dont worry its a junk wheel we scrapped but it worked well for holding this turbo up at an angle lol)
http://i173.photobucket.com/albums/w56/hemidartguy/5da98185.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/1eb9b789.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/90e6581e.jpg
Once we get back from SEMA we'll be starting to work on a set of MTC 6954B's and a set of MTC 7659B turbos that will be getting tested back to back.
donniekak
10-31-2011, 12:58 AM
What is the compressor inducer measurement on the 7659b?
AdamVR4
10-31-2011, 11:52 AM
We are planning to offer an upgrade service like we do with our TD04's right now where we will upgrade peoples existing TD05's (only MHI ones can be upgraded though, as we found out the knockoff ones you get in some of the kits have different journal bearing sizes, different piston ring seat size etc so none of our parts fit in them. We haven't looked into prices for upgrading peoples existing turbos yet on that so let me crunch the numbers and I'll get back to you.
Don't mean to bug ya, but I'm still interested ;)
mehrshadvr4
10-31-2011, 02:22 PM
that's great. i'm looking forward to see what the stage 3 turbo would do. what have you done the the turbine side of the turbo to make it flow more and be less restrictive? i'll be running 3.5L stroker so spool is not my concern. if you guy make the power i'm hopping to get, it'll make me very happy that i didn't go with DR manifolds :D. i'll be sending my TD05s to you sometime this winter to get them converted, hopefully for the right price :D. also do you think that the stock internal waist gate is enough to control the boost on these turbos?
one more thing. what do you think about batmowheel's wheel design that they got the idea from Jet engine blades. they are design to have more surface area than the same size blade acting like a bigger turbine than what they are. do you think this would be better design than what you have right now? they say their 66mm Batmo should flow equal volume to a 71mm standard cast or billet straight edge wheel which is pretty crazy itself. i'm all in for best performance for the money. :D
http://i19.photobucket.com/albums/b156/a4ringedone8t/Misc/Batmo.jpg
That is actually a picture I took at the shop of both of my turbochargers. The one on the left is a GT4276 and the one on the right is the S374 BatMoWheel (smaller than my GT4276!)
Car was making around 800rwhp on the GT42 with a 1.01 A/R back housing and the car is now making 941rwhp with a 1.10 A/R back housing and smaller turbo. The compressor wheel works great. People with built engines are making about 50rwhp less than mine and I am still on a stock block and head aside from cams only.
http://www.bullseyepower.com/seepicture.asp?b=7&bc=93
http://www.enginebasics.com/Advanced%20Engine%20Tuning/Images/Batmo%20Compressor%20Wheel%202.jpg
http://www.enginebasics.com/Advanced%20Engine%20Tuning/Images/Batmo%20Compressor%20Wheel%204.jpg
motomaniac06
10-31-2011, 02:30 PM
that's great. i'm looking forward to see what the stage 3 turbo would do. what have you done the the turbine side of the turbo to make it flow more and be less restrictive? i'll be running 3.5L stroker so spool is not my concern. if you guy make the power i'm hopping to get, it'll make me very happy that i didn't go with DR manifolds :D. i'll be sending my TD05s to you sometime this winter to get them converted, hopefully for the right price :D. also do you think that the stock internal waist gate is enough to control the boost on these turbos?
one more thing. what do you think about batmowheel's wheel design that they got the idea from Jet engine blades. they are design to have more surface area than the same size blade acting like a bigger turbine than what they are. do you think this would be better design than what you have right now? i'm all in for best performance for the money. :D
http://www.bullseyepower.com/seepicture.asp?b=7&bc=93
http://www.enginebasics.com/Advanced%20Engine%20Tuning/Images/Batmo%20Compressor%20Wheel%202.jpg
http://www.enginebasics.com/Advanced%20Engine%20Tuning/Images/Batmo%20Compressor%20Wheel%204.jpg
tey say their 66mm Batmo should flow equal volume to a 71mm standard cast or billet straight edge wheel which is pretty crazy itself.
where can I find more info on that wheel/turbo?
lparrill
10-31-2011, 03:20 PM
Bullseye Power Turbos (http://www.bullseyepower.com/home.asp)
92RT-TT
11-01-2011, 01:04 AM
Don't mean to bug ya, but I'm still interested ;)
Just sent ya a message! :)
What is the compressor inducer measurement on the 7659b?
We'll be releasing most of that information when we officially release the turbos. The thread will be coming soon. Just to give you an idea, its similar to a GT35R ;)
that's great. i'm looking forward to see what the stage 3 turbo would do. what have you done the the turbine side of the turbo to make it flow more and be less restrictive? i'll be running 3.5L stroker so spool is not my concern. if you guy make the power i'm hopping to get, it'll make me very happy that i didn't go with DR manifolds :D. i'll be sending my TD05s to you sometime this winter to get them converted, hopefully for the right price :D. also do you think that the stock internal waist gate is enough to control the boost on these turbos?
one more thing. what do you think about batmowheel's wheel design that they got the idea from Jet engine blades. they are design to have more surface area than the same size blade acting like a bigger turbine than what they are. do you think this would be better design than what you have right now? they say their 66mm Batmo should flow equal volume to a 71mm standard cast or billet straight edge wheel which is pretty crazy itself. i'm all in for best performance for the money. :D
We do a significant amount of porting on the inlet and of course we machine the whole thing out for the bigger turbine wheels which opens up the rest of it. With what we've done to the Evo III housings and how much we've opened them up we aren't expecting back pressure to be an issue.
That Bat wheel is interesting. Not sure I'm really digging the compressor covers though, seems kind of cheesy to me but I do admit increasing surface area of the blade is what helps increase flow. That's why our billet wheels have an extremely tall tip height and extended blade length as well as the curve that you see in the pictures. As for being a better design then what we have, I dont think so, we've tested tons of different blade configurations in our quest to find the best one and I'm confident we've found the best. None of our billet wheels have straight blades, straight blades are such an old technology, its all about the curve! :D
mb3000
11-01-2011, 01:19 AM
If only there was an affordable, durable, effective way to bolt these suckers up!
92RT-TT
11-01-2011, 02:36 AM
If only there was an affordable, durable, effective way to bolt these suckers up!
If things go according to plan, eventually we'll be offering manifolds. We've got a lot of projects though so it may be awhile. Once we get TD04 Billet turbos finished, we plan to go back and design manifolds for our TD05's and TD04's. I am going to indulge myself though and finish the manifold setup for my twin turbo V8 Cuda first :D
Just for fun, the other day when I was at the shop I took some pictures of a Billet 20G wheel next to our MTC 69B wheel and then I took some comparison photos of our 69B wheel with a Greddy 18G, Evo 16G, and TD04 19T. The side by side next to the 20G show just how different our MTC 69B wheel is, twin 5 blade vs twin 6 blade, much longer blade sweep, extended tip height, longer blade length, and curved blades. Oh and the last couple are a S300 comp wheel for a lexus we're building a turbo for.
From left to right, MTC 69B then 20G
http://i173.photobucket.com/albums/w56/hemidartguy/932a90b5.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/8afce435.jpg
from left to right, MTC 69B, Greddy 18G, Evo III 16G
http://i173.photobucket.com/albums/w56/hemidartguy/14092dbc.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/6e556a7b.jpg
TD04 19T vs MTC 69B (TD04 19T's look so little!)
http://i173.photobucket.com/albums/w56/hemidartguy/68b2d8a1.jpg
and our MTC 69B looks so little vs. an S300 wheel lol!
http://i173.photobucket.com/albums/w56/hemidartguy/4c7af92d.jpg
mehrshadvr4
11-01-2011, 10:31 AM
those wheels look sexy. like some UFO shit lol. how on earth were you able to machine something like this. it must have taken some high tech machine to cut something like that.i have never seen td05 20 in real life before but i'm guessing it has bigger compressor cover than 16g.have you guys though of working on same bad ass blades on 20G turbos so i can have even much better bolt on turbo option for my car? :D
AdamVR4
11-01-2011, 11:25 AM
http://www.youtube.com/watch?v=nTHLs0oFFQo
http://www.youtube.com/watch?v=Fjzhygzafr0
92RT-TT
11-01-2011, 12:36 PM
those wheels look sexy. like some UFO shit lol. how on earth were you able to machine something like this. it must have taken some high tech machine to cut something like that.i have never seen td05 20 in real life before but i'm guessing it has bigger compressor cover than 16g.have you guys though of working on same bad ass blades on 20G turbos so i can have even much better bolt on turbo option for my car? :D
Haha thanks. The video's Adam posted are how, a 5 axis cnc mill. Each wheel takes about 7-8 hours to make. 20G compressor wheels are such old technology (20 year old blade design) that it isn't even worth just tweaking that design, you're better off starting with a completely new design which is why all our wheels we started from scratch with. If you had a 20G turbo already, our stage 2 and 3 are bigger then 20G's so we could machine your compressor cover to fit our bigger wheels.
Thanks for the video's Adam! If I take video someday I'd need to slow down the recording because I dont think I have a memory card big enough to record 8 hours of video!
AdamVR4
11-01-2011, 12:45 PM
Thanks for the video's Adam! If I take video someday I'd need to slow down the recording because I dont think I have a memory card big enough to record 8 hours of video!
youtube is a helluva resource. I'm glad I can view it at work :)
mehrshadvr4
11-01-2011, 01:13 PM
great video. i mean about the 20g turbo was can you fit bigger wheels on 20g housing than 16g housing?
Jimvr4
11-01-2011, 04:41 PM
youtube is a helluva resource. I'm glad I can view it at work :)
Thanks for posting those! Watching those machines work is a thing of beauty :D
92RT-TT
11-01-2011, 11:33 PM
great video. i mean about the 20g turbo was can you fit bigger wheels on 20g housing than 16g housing?
We can sleeve any housing so really the 16G compressor housing doesn't limit us at all. The 20G compressor cover depending on the make has only marginally more material then the 16G. Either way when we get to our stage 2 and 3 we have to sleeve and weld the compressor housing.
AshyBone
11-02-2011, 01:44 AM
So this was the turbos you told me about when you finished rebuilding my eclipse 14b/16g (whatever it is) turbo. Man I shoulda held out lol. Oh well I got another blown turbo in the eclipse currently, if its any cheaper I might stock the dsm sights till I come up with another td05 turbo pic that up and send them both to you for a stage 1+ upgrade lol. I'd be very interested in these. I pissed myself when matt made the 16gs. Seeing you guys great work and perfect customer service I might have to go with you guys.. Plus matts are 3600 I think.
mehrshadvr4
11-02-2011, 02:08 PM
Matt's turbo had titanium turbines.
92RT-TT
11-02-2011, 02:39 PM
So this was the turbos you told me about when you finished rebuilding my eclipse 14b/16g (whatever it is) turbo. Man I shoulda held out lol. Oh well I got another blown turbo in the eclipse currently, if its any cheaper I might stock the dsm sights till I come up with another td05 turbo pic that up and send them both to you for a stage 1+ upgrade lol. I'd be very interested in these. I pissed myself when matt made the 16gs. Seeing you guys great work and perfect customer service I might have to go with you guys.. Plus matts are 3600 I think.
Yep these were the ones :).
Matt's turbo had titanium turbines.
Titanium Aluminide ;). I'd hate to think how much a pure titanium turbine shaft/wheel would cost lol
mehrshadvr4
11-02-2011, 05:22 PM
lol yes. well i don't know about the pricing or alloys lol, but i'm sure those were not cheap either.
R/T93
11-02-2011, 10:04 PM
Its probably a grand for a foot of some 4" barstock.
familyMAN
11-05-2011, 09:19 PM
Received my turbos yesterday:)
Here are a couple pics. Nothing special or as good as what's been posted, BUT now they are in my possession!
https://lh5.googleusercontent.com/-4yZQ0y3SL-s/TrXA4BVHxwI/AAAAAAAAAwc/6ikRVrZR2N4/s512/IMG_4694.JPG
https://lh3.googleusercontent.com/-HjeORTQC5Bw/TrXA4EWd2wI/AAAAAAAAAwY/5ZDOivV5CRY/s512/IMG_4695.JPG
Right, get some powa going brother!!
92RT-TT
11-05-2011, 10:54 PM
^^^^ What he said! We're looking forward to seeing what kind of power the stage 1+ makes on a 3S! :)
mehrshadvr4
11-07-2011, 01:12 AM
can you forward us to the place where they talk about these turbos on the evos?
Midwest Turbo Connection
11-07-2011, 10:09 AM
There's a thread that 92RT-TT started that talks a little about the Evo testing we did. I believe it was the thread looking for test cars for our Billet TD05 turbos. Soon enough our 3S results from both testers will be coming in so we'll have numbers that actually matter to the 3S community :D.
Our Evo testing was done locally with people we knew not people that were from forums. Honestly while our initial testing was on the Evo, it was simply because we knew people locally that had good cars to test and build on. Had we known someone locally with a 3S that was a suitable test car we probably wouldn't have even tested on the Evo platform yet.
92RT-TT
11-12-2011, 01:03 PM
Here's a picture of what will be a MTC 8359B (stage 3)
Sorry for the poor quality pictures, they're from my phone.
9 Blade turbine shaft w/8 degree's of clipping
http://i173.photobucket.com/albums/w56/hemidartguy/3179c7ab.jpg
Stage 3 wheel on left, stage 1 wheel on right
http://i173.photobucket.com/albums/w56/hemidartguy/2ead650f.jpg
Also here is one of the MTC 6954B CHRA's all assembled, balanced and ready for our other tester. :D
http://i173.photobucket.com/albums/w56/hemidartguy/72b774cb.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/cee62e47.jpg
familyMAN
11-12-2011, 01:09 PM
Holy Hell! That will fit in 16g housing?
92RT-TT
11-12-2011, 01:32 PM
Holy Hell! That will fit in 16g housing?
hehe well... when we work our magic it does :lo5l:. Its like what we have to do to a 9B housing when we put a 19T wheel in it. We machine the inlet snout off completely and press a new slug all the way through, weld it in, then machine it to the right size. We actually just bought a single 20G compressor housing so we could measure it against a 16G housing and see if there was more material to start off with if we wouldn't have to sleeve it, my guess is we still will because the MTC 83B wheel is so huge lol. The housing should be in next week so we'll know more then. For now though we just have to fully sleeve and weld the 16G comp covers.
mehrshadvr4
11-14-2011, 02:17 AM
damn that look sick.
92RT-TT
11-19-2011, 05:43 AM
Couple more pics... we've got a few more complete billet TD05 turbos but I'll wait to post those until we start an official billet td05 launch thread. For now here's a pic of our stage 2. This ones kinda dirty and crappy looking as its one used for test fitting etc.
http://i173.photobucket.com/albums/w56/hemidartguy/7b1524cd.jpg
Here's the machine that makes them :)
http://i173.photobucket.com/albums/w56/hemidartguy/9c779502.jpg
Here's a set of fully ported turbine housings
http://i173.photobucket.com/albums/w56/hemidartguy/93609314.jpg
http://i173.photobucket.com/albums/w56/hemidartguy/e74f109a.jpg
See the turbine wheel blades... after porting and opening up the housing you can just see how well the exhaust gas flow will hit those blades and spin the turbine shaft, can you say spool! :biggrin:
http://i173.photobucket.com/albums/w56/hemidartguy/5b04092a.jpg
That's it for now, in the next 1-2 weeks we'll be officially launching the turbo line and we'll post more of the completed ones we have in a new thread.
Drweldin
11-19-2011, 09:12 AM
Neat stuff...how long does it take to cut one of those wheels? Is there any post CNC work, or are they ready to go right out of the machine?
92RT-TT
11-19-2011, 12:43 PM
Each wheel takes about 8 hours to make. Once they come out thought they are ready to go though
Drweldin
11-19-2011, 12:49 PM
Side question for you after looking at the porting pics...this is probably a dumb one, but are there any gains to be had porting/smoothing a TD04 exhaust housing?
FeaRpb
11-19-2011, 12:58 PM
There are slight gains from porting the td04 housing, as long as the manifold is ported to match it.
MADMarc
11-19-2011, 01:35 PM
*dumps wallet onto desk and smashes piggy bank* You guys do amazing work. I'm stoked to see that it looks like business is treating you well and your development is going strong. Now, just make sure that card keeps a Stealth on it! There will be no changing that to an EVO like all the other shops! ;)
Oyyci
11-19-2011, 05:30 PM
I really want to see some numbers on these and your td04 billets. I've had eyes for the dr750s for awhile, but that could change depending on your prices and success with numbers.
92RT-TT
11-19-2011, 05:31 PM
Side question for you after looking at the porting pics...this is probably a dumb one, but are there any gains to be had porting/smoothing a TD04 exhaust housing?
We've noticed that with the porting you gain a little bit of hp and spool but the main thing you gain is the faster spool. With porting a TD05 we noticed a 300 rpm faster spool, not crazy gains but anything you can do to get it to spool faster is a plus.
*dumps wallet onto desk and smashes piggy bank* You guys do amazing work. I'm stoked to see that it looks like business is treating you well and your development is going strong. Now, just make sure that card keeps a Stealth on it! There will be no changing that to an EVO like all the other shops! ;)
Haha thanks Marc, glad you like it. Yeah business is going great. We're just getting things ready to start our TD04 project next but we want to offically release the Bilet TD05's before we get too far into the TD04 project. I will admit I did actually start looking at Evo's. With all the testing having been done on Evo's I almost defected. But I've started buying parts to build a monster VR4 so I am going to stay true to the 3S's :).
92RT-TT
11-19-2011, 05:35 PM
I really want to see some numbers on these and your td04 billets. I've had eyes for the dr750s for awhile, but that could change depending on your prices and success with numbers.
We're excited to get the TD04's going too, looking at what our goals are for the TD04s, obviously there are certain benchmarks we want to exceed such as getting over 600 whp and various other things. Keeping costs reasonable is definitely important too, the whole reason we got into turbos was to offer a quality product at a reasonable price for the 3S community (things sure have expanded past just 3S's though!)
Oyyci
11-19-2011, 10:05 PM
I have a local friend who purchased some 15gs from you guys. I was impressed with the work and customer service. I love giving new companies a chance. I even plugged SSM when they were new and looked positive. Competition is great for the customer; it gives more choices and helps keep prices reasonable. Don't get new wrong, Matt/DR have done great things for the platform and deserves much respect. His stuff is well worth the cost. But I have decided to wait and see your results before I decide where to go with my car. Keep up the good work!
Tigchamp
11-20-2011, 02:44 PM
Subscribed to Stage 2:DevilSmile:
Jeff:coo3l:
motomaniac06
11-23-2011, 09:40 PM
have you guys looked into making ti.al. turbine wheels?
J. Fast
11-24-2011, 02:35 AM
Sam question as Adam, Any info on pricing yet, stock MHI Evo conversions/rebuild?
92RT-TT
11-24-2011, 03:45 AM
Subscribed to Stage 2:DevilSmile:
Jeff:coo3l:
:D
We've got a tester doing the stage 2's as well as the stage 1+'s back to back on his car so we'll have direct comparisons between some of the different stages soon :coo3l:
have you guys looked into making ti.al. turbine wheels?
The cost of those wheels would really drive the price up. We have 3 different turbine shafts depending on what stage you get so having Tial shafts developed for all 3 designs would get really expensive. I believe the Tial TD05 wheel that was made is only a TD05H (could be wrong but based off pictures I've seen thats what it looks like) and if that's the case even if we could get it, only our stage 1 uses that small of a turbine wheel. All our other stages from Stage 1+, 2, 2+, and 3 use bigger turbine shafts then that. With our biggest wheel it is a 9 blade and also has a smaller shaft nut on the end so it weights significantly less then a normal 12 blade.
Sam question as Adam, Any info on pricing yet, stock MHI Evo conversions/rebuild?
We've got all the pricing done but we were hoping to have our dyno results in before we release all the information on them. Erik has his turbos but is waiting on his engine machining I believe and the other tester just received his turbos yesterday at the shop so within the next week to week and a half hopefully he can dyno them and we will have dyno results. Once we've got those I will make a new thread and put dyno results along with pricing and all specs and then they will be publicly released :).
3kgtSL91
11-24-2011, 10:57 AM
so for a daily driver with 3.5 what stage would you recommend going with?
92RT-TT
11-24-2011, 01:23 PM
so for a daily driver with 3.5 what stage would you recommend going with?
I would recommend going with our stage 1+ or our stage 2.
Both the stage 1+ and the stage 2 use the same turbine shaft (11 blade) but stage 1+ uses our 69B comp wheel (twin 5 blade) and the stage 2 uses the bigger 76B comp wheel (twin 7 blade). Both should spool plenty fast just the stage 2 has the bigger comp wheel so it should make a fair amount more power.
3kgtSL91
11-24-2011, 01:53 PM
I would recommend going with our stage 1+ or our stage 2.
Both the stage 1+ and the stage 2 use the same turbine shaft (11 blade) but stage 1+ uses our 69B comp wheel (twin 5 blade) and the stage 2 uses the bigger 76B comp wheel (twin 7 blade). Both should spool plenty fast just the stage 2 has the bigger comp wheel so it should make a fair amount more power.
i have two 68HTAs for my evo 3 kit, so if i'd switch to something else, i want to have more power, but still be able to spool semi fast... what is stage 2 capable of? 700 awhp possible?
familyMAN
11-24-2011, 02:49 PM
We've got all the pricing done but we were hoping to have our dyno results in before we release all the information on them. Eric has his turbos but is waiting on his engine machining I believe and the other tester just received his turbos yesterday at the shop so within the next week to week and a half hopefully he can dyno them and we will have dyno results. Once we've got those I will make a new thread and put dyno results along with pricing and all specs and then they will be publicly released :).
Just found out that machine shop is supposed to finish up on Saturday. Finally making progress again!
Looking forward to the other testers back to back testing of 1+ and 2!
92RT-TT
11-24-2011, 04:45 PM
i have two 68HTAs for my evo 3 kit, so if i'd switch to something else, i want to have more power, but still be able to spool semi fast... what is stage 2 capable of? 700 awhp possible?
Our stage 1 is similar to the 68HTA's but our MTC 69B compressor wheel is actually 1 mm bigger. Both the 68HTA and our Stage 1 use a standard TD05H turbine shaft. If you wanted something that was going to perform slightly better then the 68HTA's then our stage 1 would be all you would need.
Our stage 1+ has the same MTC 69B compressor wheel as the stage 1 and it also has a 5 mm bigger turbine wheel with 11 blades. The stage 1+ should be capable of 700 awhp on a 3.0L.
On a 3.5 you should really have no problems at all hitting well over 700 and I mean well over 700! In fact our other tester has a 3.5 and given the hp numbers we have seen on his other turbos we're estimating he should make around 850 awhp with the Stage 1+ turbos. These may make way more power then we estimate but we'd rather under estimate then over estimate. :)
The stage 2 should be capable of 750-800 awhp on a 3.0L with similar spool characteristics as the stage 1+ because they share the same 11 blade turbine wheel. The difference being the stage 2 has a MTC 76B compressor wheel which is roughly a 5mm bigger compressor wheel then the stage 1 and 1+. On your 3.5 they could make 900+ but again we're being conservative on our estimates because we'd rather be pleasantly surprised then disappointed lol.
Stage 2+ Should be good for power levels from 800-850 awhp on a 3.0L. This has the same MTC 76B compressor wheel (5mm bigger then the stage 1 and 1+) as well as a custom TD06H sized 9 blade turbine shaft. I say TD06H sized because I dont believe anyone actually has a TD06H turbine shaft in a 9 blade other then the ones we are having made. The turbine wheel is about 25% lighter then a standard TD06H so it really helps with spool times.
Stage 3 should be good for 900-1000 awhp on a 3.0L. This has our biggest compressor wheel the MTC 83B, which is a full 10mm bigger inducer then the stage 1 and 1+ comp wheel. The exducer difference from our stage 1 and 1+ MTC69B compressor wheel to the stage 3 MTC 83B is 14mm!
To give you an idea of just how big of a jump that is, take a td04 9b vs a td04 19T, the difference in inducer size between those two is 11.1 mm and a 9B to a 19T makes roughly 300 more whp. I am going to over simplify things here but going from our stage 1+ to our stage 3 should make for at least a 300 whp increase. There are other factors of course that affect the hp increase but just to give a general idea of the size differences vs hp increases.
Just found out that machine shop is supposed to finish up on Saturday. Finally making progress again!
Looking forward to the other testers back to back testing of 1+ and 2!
Awesome Erik! Glad to hear they are making progress again! It'll be a race to see who gets them on the dyno first lol.
3kgtSL91
11-24-2011, 07:18 PM
how is the spool response on stage 2 vs stage 2+?
92RT-TT
11-24-2011, 08:58 PM
how is the spool response on stage 2 vs stage 2+?
Spool response should be similar between the two. While the Stage 2+ does have a 5mm bigger exducer on the turbine shaft, it also is 25% lighter then its normal 12 blade counterpart so it should spool similarly to the 11 blade turbine shaft in the Stage 2.
3kgtSL91
11-24-2011, 09:15 PM
put me down for stage 2+ than :D
92RT-TT
11-25-2011, 06:08 AM
Sounds good, whenever you want to send them in you can. Although I'm sure you are going to want to know what its going to cost you aren't you? lol. I'll send you a pm with pricing for the stage 2+ upgrade. :)
NOMIEZVR4
11-25-2011, 12:56 PM
Wow..sounds exciting. Can't wait for the td04 developments to start progressing...especially since my car is running again!
92RT-TT
11-25-2011, 04:02 PM
Wow..sounds exciting. Can't wait for the td04 developments to start progressing...especially since my car is running again!
We're hoping to have our first wheels done by the beginning of the new year with testing to commence as soon as the first prototypes are done :).
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.