View Full Version : Q's on shipping an engine
JohnnyTurbo
10-26-2011, 07:04 PM
How much does a complete 6G72 shortblock weigh? Block, rotating assembly & oil pump.
oil pump comes on a shortblock??? :confused:
wikipedia lists the 6g73 at 340lbs. subtract heads & stuff and you're probably looking at ~250, i would guess.
Zaroth
10-26-2011, 07:40 PM
Less than that I would think. Picked up a short block just the other day and I didn't feel like I was lifting ~125lbs.
JohnnyTurbo
10-26-2011, 07:57 PM
Less than that I would think. Picked up a short block just the other day and I didn't feel like I was lifting ~125lbs.That's what I'm thinking, but I have nothing to really go by. A 6 spd weighs 130 lbs and there is way more steel in a tranny than in a short block. From pictures I've seen, take the heads off of a 6G72 and the short block is relatively small.
IPD - Yes oil pump is part of the weight. The original oil pump is trashed and I ordered a new one with the short block rebuild.
FeaRpb
10-26-2011, 08:19 PM
My built shortblock weigh I think 180~
It cost me $122 to get it shipped from Pampena to my old work.
JohnnyTurbo
10-26-2011, 09:41 PM
My built shortblock weigh I think 180~
It cost me $122 to get it shipped from Pampena to my old work.Do you remember who the carrier was?
RealMcCoy
10-26-2011, 10:28 PM
The last thing you want to do is under estimate the weight, and have the shipper catch it, delay your shipment, and charge you a fee to weigh it and calculate correct shipping fees... BTDT
You also need to consider the weight of crating as well.
The last time I weighed a bare block it was 112lbs. I'm pretty sure a crank, rods, and pistons weighs more than 13 lbs, so I believe the 125lb estimate to be a bit light...
It's not too heavy to weigh on a bathroom scale...
FeaRpb
10-26-2011, 10:37 PM
It was DB Shenker. They don't do domestic anymore ;(
stealthee
10-26-2011, 11:02 PM
It was DB Shenker. They don't do domestic anymore ;(
Well that sucks. Their rates were great. I shipped an ATX to Florida for about $175. With the crate and everything it was about 250lbs.
Chris@Rvengeperformance
10-28-2011, 12:15 PM
i shipped a trans on a pallet to mikes95RT on the other site a few years ago for like $150.00.
He knew some freight site where you could get a bunch of quotes, you might pm him.
vroom4
10-28-2011, 12:38 PM
I shipped a 6 speed fedex home delivery for 75$ :lol:
RealMcCoy
10-28-2011, 12:54 PM
i shipped a trans on a pallet to mikes95RT on the other site a few years ago for like $150.00.
He knew some freight site where you could get a bunch of quotes, you might pm him.
There's a lot of fly by night brokers out there.... I've heard horror stories of them going under and not paying shipping companies. Then you get to pay twice.
These guys are legit, and have treated me quite well: Freight Quote, Freight Companies, Freight Shipping Companies, Shipping Rates - FreightCenter.com (http://www.freightcenter.com/)
Zaroth
10-28-2011, 01:31 PM
I shipped a 6 speed fedex home delivery for 75$ :lol:
How many pieces was it in when they dropped it off?
stealthee
10-28-2011, 06:47 PM
i shipped a trans on a pallet to mikes95RT on the other site a few years ago for like $150.00.
He knew some freight site where you could get a bunch of quotes, you might pm him.
Thats funny, Mike shipped me two trans worth of parts when I bought the Quaiffe LSD off of him and it came Fed Ex Ground. :p
Chris@Rvengeperformance
10-28-2011, 08:43 PM
Thats funny, Mike shipped me two trans worth of parts when I bought the Quaiffe LSD off of him and it came Fed Ex Ground. :p
You can ship the na mtx for like 75 through fedex
Sent from my DROIDX using Tapatalk
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.