PDA

View Full Version : No spark on center coil



DuTTch
10-18-2011, 09:06 PM
I am running on 4 cylinders in my 96 VR4, I am not getting any spark on center coil pack.

-PTU is good, tried third one from my running 95 NA
-Changed out center coil pack three times with known good one
-Changed spark plug wires
-Changed spark plugs on those cylinders as they were wet.

It started when I ran it hard one day in case it matters.

What else?

Steve '92ES
10-18-2011, 09:56 PM
Try taking a look at your Cam sensor. Make sure it's plugged in tight, and that the wire isn't frayed. If it looks good visually you should check for signal. If you're getting signal check the reluctor plates (aka Ninja Star) for both the Cam and the Crank sensor to make sure they haven't come loose.