View Full Version : forged wastegates psi issues?
Sin'sVr4
10-16-2011, 12:48 PM
Ok, well, i bought the forged billet wastegates from DR with the 15psi spring. So, put them on my car and they only go to 20 psi. WG psi is only at 9psi? So I talk to Matt and he said shim them? So, i shimmed them and adjusted the arm and wg pressure is still 9si and max is still 20psi? wtf? anyone else have this issue? I paid for the 15psi spring and its apparently not? Matt said they dont have the other springs so am i just SOL?
green-lantern
10-16-2011, 01:01 PM
Not sure what to tell you there man. Have you talked to Matt since you shimmed them? Surely he can figure out what the deal is.
Sin'sVr4
10-16-2011, 01:57 PM
i sent him a pm, not responded back yet. Just the reason i went with those is to get more boost. stupid to spend $400 for less boost from DR RACING
R/T93
10-16-2011, 02:15 PM
Huge boost leak?
mb3000
10-16-2011, 02:33 PM
Cracked exhaust manifold?
J. Fast
10-16-2011, 03:38 PM
Sin was blowing out stock wastegates above 23psi so he ordered a set of billet wastegates with 15psi springs from DR. Monet shipped Sin a set of Forge wategates and the order was not filled correctly. The wastegates have 9psi springs. The wastegates have been tested and confirmed to have 9psi springs.
He ordered 15psi springs :eh:. Now Matt's telling him to shim them? Alright, seriously, he didn't ask for shims Matt. He asked for 15psi springs. If you couldn't fill the order you should have said something or sent the right springs as soon as he informed you. Send him the springs he originally ordered Monet. It really bugs the hell out of him.
JasonY
10-16-2011, 03:40 PM
The wastegates need to be matched to the turbos, you cant just install them and expect them to work as advertised.
Jason
J. Fast
10-16-2011, 03:48 PM
There is no room for adjustment. He's reached the maximum manifold holding pressure on the 9psi spring, 21psi. He needs a stronger spring.
green-lantern
10-16-2011, 04:10 PM
The wastegates have been tested and confirmed to have 9psi springs.
Well if you guys are sure they are 9psi springs and he ordered 15 then yes I think Matt should source him some 15's as soon as he can.
JasonY
10-16-2011, 04:34 PM
Looks like Matt addressed this already on the other forum"
You have yello springs, those are very capable of working at 15PSI (those are the same srings I have in my car), Like I told you when you ordered them YOU MUST set up and balance them on YOUR turbos. (would you like me to post all the PM's were I told you that over and over?) YOU are the one that chose to just bolt them on with out setting them up on your turbos with a hand pump like I told you too . I told you mitsu castings are different you MUST set-up the pre load. You close not to.
So, remove your turbos, and use the turn buckle on the actuators to set the pre-load with a hand pump that has a boost gauge, like I told you too in the first place. If you get that set and you still cant make boost your problem is elsewhere.
So that my friend is "the deal"
Jason
J. Fast
10-16-2011, 05:28 PM
Obviously Matt doesn't get it, and that's not the fucking point. Mike ordered 15lb springs, paid for 15lb springs. He wouldn't need to shim. So if that was the case then Matt needed to send shims and an adjustment kit along. No such thing took place.
From Forge Motorsport Themselves....
"If you are finding that the valve is dumping more than required or you are loosing boost pressure it is normally an indication that a stronger spring is required. Conversely if the valve is failing to dump it may be necessary to install a weaker spring. If during this tuning of your valve you are faced for example with the red spring being to strong and the blue spring to weak, you can add the spacers to the blue spring to increase the tension by small increments, thus achieving a setting between the red and blue springs.
Valve Spring color coding:
Green - 5-15 PSI
Yellow - 15-23 PSI
Blue - 23-30 PSI
Red - 30 + PSI "
He wants to run 26+ psi, he needs a blue spring.
Sin'sVr4
10-16-2011, 06:43 PM
i dont have a boost leak, or a cracked manifold. the point is "I ORDERED, blue springs, not yellow. No matter how much i shim them and how much i pump the shit out of them, they will never be blue!" wtf is so hard to comprehend. If i ordered 100 blue pens, and was sent 100 red pens, thats not what I fucking ordered. Right? If i ordered a fucking chicken sandwhich and got a fish sandwich, would you say just put ketchup on it? WTF kind of service is this? Why the fuck do you side with monet jason? He is wrong, simple as that. quit sucking his dick. He sent me the wrong spring. Is it that hard to understand? You pay $400 for something you expect it to be set up. Why should I have to shim them? I did and they are still at 20psi. I dont understand why people just think everything he says is right. I just want it right.
Ok, but from the post from Jfast...if a yellow is 15-23psi why is my wg pressure at 9?
SnakeSkinner
10-16-2011, 08:27 PM
Like I replied to you on the other forum
You have yello springs, those are very capable of working at 15PSI (those are the same srings I have in my car), Like I told you when you ordered them YOU MUST set up and balance them on YOUR turbos. (would you like me to post all the PM's were I told you that over and over?) YOU are the one that chose to just bolt them on with out setting them up on your turbos with a hand pump like I told you too . I told you mitsu castings are different you MUST set-up the pre load. You close not to.
So, remove your turbos, and use the turn buckle on the actuators to set the pre-load with a hand pump that has a boost gauge, like I told you too in the first place. If you get that set and you still cant make boost your problem is elsewhere.
So that my friend is "the deal"
SnakeSkinner
10-16-2011, 08:34 PM
i dont have a boost leak, or a cracked manifold. the point is "I ORDERED, blue springs, not yellow. No matter how much i shim them and how much i pump the shit out of them, they will never be blue!" wtf is so hard to comprehend. If i ordered 100 blue pens, and was sent 100 red pens, thats not what I fucking ordered. Right? If i ordered a fucking chicken sandwhich and got a fish sandwich, would you say just put ketchup on it? WTF kind of service is this? Why the fuck do you side with monet jason? He is wrong, simple as that. quit sucking his dick. He sent me the wrong spring. Is it that hard to understand? You pay $400 for something you expect it to be set up. Why should I have to shim them? I did and they are still at 20psi. I dont understand why people just think everything he says is right. I just want it right.
Ok, but from the post from Jfast...if a yellow is 15-23psi why is my wg pressure at 9?
You did not order blue springs, would you like me to post our entire thread of PM's about the actuators? You NOT ONE TIME asked for a set of actuators with Blue springs, not ONE SINGLE TIME, you asked for a set of actuators that would work for 15psi. And I told you over and over again what you NEEDED to balance then on YOUR turbos with a pump and a gauge. YOU chose not to. I went engaged my better judgment even selling you those when you asked me if we could burry the hatchet and asked to order them. I should have known better. You Got actuators with the springs that if set up right on a correctly built set of turbos on a correctly built car would work just fine. And if you had went about asking for my help in a different way then this I probably would have sent you a set of blue springs to help you, but now if you want blue springs, call Forged and order a set. And dont ever try and order anything from me again because I will NEVER sell you anything again.
Show me in here WERE you asked for "BLUE" springs?
ok, money sent. Now, do I have to use the pump on these or will they come ready to just bolt on and go?
what do you recommend? I was thinking 15psi?
I am going to buy the billet wastegates but You dont have an option for paypal. Thats the only way i do my transactions. Can I paypal you the $397.12?
ya thats fine, what springs you want in them? (what psi you going to set them to)
That's with I usually run them at, thats what I have the set on my car set to.
Matt@dynamicracing1.com (pay pal)
I can set them on a set of turbos I have here, now, if you Flapper vales are bent, castings slightly different (very common on Mitsu turbos), there not going to be right. But you can chance it if you want. Your car, your turbos, your call.
i guess set em up on those then Ill test them again on mine to see. Thx again Matt. When will these ship out?
You ASKED FOR 15PSI actuators! thats what you got!
SnakeSkinner
10-16-2011, 08:42 PM
Obviously Matt doesn't get it, and that's not the fucking point. Mike ordered 15lb springs, paid for 15lb springs. He wouldn't need to shim. So if that was the case then Matt needed to send shims and an adjustment kit along. No such thing took place.
From Forge Motorsport Themselves....
He wants to run 26+ psi, he needs a blue spring.
O god here comes the moron again, HE HAS YELLOW SPRINGS! According to YOUR own post he has the correct springs. That's Forged Spring recommendation for setting up BASE pressure. By moving the turn buckle. It the spring pressure what the MAX pressure you could run stock actuators could only be used for 5-8psi of boost because thats the adjustment range of the stock actuators base pressure with the turnbuckle. How many people out there are running 20+psi on stock actuators. It's not Forged or my fault his turbos or his set up on the rest of his car is FUBAR.....
See my above post, he got EXACTLY what he asked for.
Yellow springs are the same springs that are in my turbos on my car and it has no problem having a 15psi base and a 30+psi max.
Before seeing this thread I would have gladly sent him a set of blue springs (they only cost a few bucks) to help him out, infact after seeing his PM to me on 3si I was going to send him a set. But now he can call forged and get them him self. He got what he ordered and got what he paid for already. You catch more flies with honey.
SnakeSkinner
10-16-2011, 08:59 PM
Well if you guys are sure they are 9psi springs and he ordered 15 then yes I think Matt should source him some 15's as soon as he can.
he has Yellow springs, thats the correct spring for the application. See my above posts.
Just because they dont seem to work for 15psi on his turbos, on his car does not mean they are not correct. Seeing how I have sold 100's of sets of these it's kind of funny that the only set that does not work for 15psi with yellow springs is this set. And I set up the turn buckles on these for him (FOR FREE!) on a set om MHI new turbos I had here with my hand pump and they cracked upen right at 15psi.
SnakeSkinner
10-16-2011, 09:00 PM
The wastegates need to be matched to the turbos, you cant just install them and expect them to work as advertised.
Jason
BINGO!
And he was TOLD this, BEFORE he ordered them.
JasonY
10-16-2011, 09:04 PM
Its the same thing you told me a while back too when i wanted to get them for my 19T's. For what its worth, i made my post here before reading Matt's post from 3si...
Jason
SnakeSkinner
10-16-2011, 09:16 PM
Its the same thing you told me a while back too when i wanted to get them for my 19T's. For what its worth, i made my post here before reading Matt's post from 3si...
Jason
Some people just refuse to take personal responsibility for anything, everything is always somebody else fault. He got Exactly what he asked for (see the above PM's he sent me and I sent to him when he asked to order them). He asked for 15psi actuators and thats what he got yellow spring actuators. (heck even Green Would have still been within what he asked for) But now they dont work for him so it's some how my fault.
Right from forged
Valve Spring color coding:
Green - 5-15 PSI
Yellow - 15-23 PSI
Blue - 23-30 PSI
Red - 30 + PSI "
I new better then to sell this guy anything, but he was being so nice there for a wile in PM's I thought he had turned over a new leaf, I guess not. My mistake, I will not make it again.
green-lantern
10-16-2011, 09:20 PM
he has Yellow springs, thats the correct spring for the application. See my above posts.
Just because they dont seem to work for 15psi on his turbos, on his car does not mean they are not correct. Seeing how I have sold 100's of sets of these it's kind of funny that the only set that does not work for 15psi with yellow springs is this set. And I set up the turn buckles on these for him (FOR FREE!) on a set om MHI new turbos I had here with my hand pump and they cracked upen right at 15psi.
Yeah I see, I definitely see your point. I thought he specifically asked for a certain spring.
mb3000
10-16-2011, 10:55 PM
Some people just refuse to take personal responsibility for anything, everything is always somebody else fault. He got Exactly what he asked for (see the above PM's he sent me and I sent to him when he asked to order them). He asked for 15psi actuators and thats what he got yellow spring actuators. (heck even Green Would have still been within what he asked for) But now they dont work for him so it's some how my fault.
Right from forged
Valve Spring color coding:
Green - 5-15 PSI
Yellow - 15-23 PSI
Blue - 23-30 PSI
Red - 30 + PSI "
I new better then to sell this guy anything, but he was being so nice there for a wile in PM's I thought he had turned over a new leaf, I guess not. My mistake, I will not make it again.
Not that my opinion matters, but I have seen your struggle Matt and I commend you as a vendor. Never in my life have I seen such good advice, guidance, and words of wisdom be met by disrespect. The fact that you're posting in this thread at all just blows my mind. But here you are, providing instructions and facts trying to help where it's clearly not appreciated.
Now I may not have the financial background to splurge on DR parts, but I sure as hell can recommend them when the opportunity is presented. Kudos to you.
Sin'sVr4
10-16-2011, 11:40 PM
Not that my opinion matters, but I have seen your struggle Matt and I commend you as a vendor. Never in my life have I seen such good advice, guidance, and words of wisdom be met by disrespect. The fact that you're posting in this thread at all just blows my mind. But here you are, providing instructions and facts trying to help where it's clearly not appreciated.
Now I may not have the financial background to splurge on DR parts, but I sure as hell can recommend them when the opportunity is presented. Kudos to you.
What the fuck are you even talking about? You have no fuckin clue how he's even talked to me on the other sites. ^^
I did test them and they cracked at 8psi. redid them with shims and same deal. I wont ever buy anything from you again so dont worry about it. Wow, you set them for free? Your a modern day fuckin moses. You have your head so far up your own ass i cant tell which end is your mouth. For what its worth, I think you have a huge ego problem and i think you are truley just a prick. yes you make good products, (great in your own mind) but theres more to life than making a great product. Your customer service SUCKS! MTC actually talks to people like human beings. They TOO make great products and have to deal with unruley customers. I TOO have to deal with customers all the time, but not ONE time do i EVER treat customers how you treat me. You think because you are a king and have all these internet folowers you can say and treat people however you want....and you can. But I actually am not a dick, just to you apparently. You have taken one of my friends and actually turned him into a monet clone (prick) because he has stars in his eyes from meeting you. Fuck it. I dont need anything from you. I did what you said, hand pump, shimmed, still the same. I really could give a shit how you percieve me. I am a family man and love my kids and this is a hobby. Matt get some social skills or you can fuck your turbos everynight "by yourself"
mb3000
10-17-2011, 12:14 AM
What the fuck are you even talking about? You have no fuckin clue how he's even talked to me on the other sites. ^^
I did test them and they cracked at 8psi. redid them with shims and same deal. I wont ever buy anything from you again so dont worry about it. Wow, you set them for free? Your a modern day fuckin moses. You have your head so far up your own ass i cant tell which end is your mouth. For what its worth, I think you have a huge ego problem and i think you are truley just a prick. yes you make good products, (great in your own mind) but theres more to life than making a great product. Your customer service SUCKS! MTC actually talks to people like human beings. They TOO make great products and have to deal with unruley customers. I TOO have to deal with customers all the time, but not ONE time do i EVER treat customers how you treat me. You think because you are a king and have all these internet folowers you can say and treat people however you want....and you can. But I actually am not a dick, just to you apparently. You have taken one of my friends and actually turned him into a monet clone (prick) because he has stars in his eyes from meeting you. Fuck it. I dont need anything from you. I did what you said, hand pump, shimmed, still the same. I really could give a shit how you percieve me. I am a family man and love my kids and this is a hobby. Matt get some social skills or you can fuck your turbos everynight "by yourself"
Not trying to come off negatively, but I've seen numerous threads/posts where you have bought things and don't know what they do/how they work. Probably the fact that you mirror everything you do here on 3si, but it seems like every week its something new. And I have seen the threads where you were bashing Matt something fierce. I never posted because it didn't involve me. The past is past, no need to drudge it back up.
And since you're a family man I would suggest refraining from the use of "fuck" and it's variations. Not exactly the example I would want to set for my kids.
NickS VR4
10-17-2011, 12:19 AM
How much do these springs cost, and why is it such a big deal to get it switched out, regardless of who is right or wrong?
Sin'sVr4
10-17-2011, 12:19 AM
doubt my 2 and 6yr old are going to read this. And i probably know more about these cars than you do so just stfu suck monets nuts some more so you wont have time to post nonsense
Sin'sVr4
10-17-2011, 12:23 AM
How much do these springs cost, and why is it such a big deal to get it switched out, regardless of who is right or wrong?
probably not too much. Just thought by paying $400 bucks for something it would be fixed. I guess thats just how I do busines. you know, the saying "the customer is always right"
I dont care honestly. there are some cool people here and some that have no business owning one of these. I appolgize to all if i offended anyone. Matt, you might be different to others, but honestly go pound sand. I wont ever buy anything or recommend you or your products, not because they arent good, by all means they are, but you have the personality of a fucking tick. Have a nice life. wait...you need to throw in a plug for your billets, you havent done that yet....
J. Fast
10-17-2011, 12:25 AM
Ok, but from the post from Jfast...if a yellow is 15-23psi why is my wg pressure at 9?
You did not order blue springs, would you like me to post our entire thread of PM's about the actuators? You NOT ONE TIME asked for a set of actuators with Blue springs, not ONE SINGLE TIME, you asked for a set of actuators that would work for 15psi.
Show me in here WERE you asked for "BLUE" springs?
You ASKED FOR 15PSI actuators! thats what you got!
What the fuck are you even talking about? You have no fuckin clue how he's even talked to me on the other sites. ^^
I did test them and they cracked at 8psi. redid them with shims and same deal. I wont ever buy anything from you again so dont worry about it. Wow, you set them for free? Your a modern day fuckin moses. You have your head so far up your own ass i cant tell which end is your mouth. For what its worth, I think you have a huge ego problem and i think you are truley just a prick. yes you make good products, (great in your own mind) but theres more to life than making a great product. Your customer service SUCKS! MTC actually talks to people like human beings. They TOO make great products and have to deal with unruley customers. I TOO have to deal with customers all the time, but not ONE time do i EVER treat customers how you treat me. You think because you are a king and have all these internet folowers you can say and treat people however you want....and you can. But I actually am not a dick, just to you apparently. You have taken one of my friends and actually turned him into a monet clone (prick) because he has stars in his eyes from meeting you. Fuck it. I dont need anything from you. I did what you said, hand pump, shimmed, still the same. I really could give a shit how you percieve me. I am a family man and love my kids and this is a hobby. Matt get some social skills or you can fuck your turbos everynight "by yourself"
Okay, after reading thru all of this apparently there's a big mis-understanding. Matt, Mike wanted his base pressure to be set at 15psi and his peak hold to be 25+ capable. It's not possible at this altitude with the yellow spring. Spring flutters at 23/24psi which is rougly 26/27psi equivalent at your elevation, maybe?
2nd, the wastegates are set to 15psi however, they have an initial crackopen pressure of 9psi. Without an electronic boost controller that's how they're going to open up. That's something that needs to be advertised by Forge.
Jeeze, you guys should walk away from the internet for a day or so after taking some chill pills.
Sin'sVr4
10-17-2011, 02:09 AM
j im fine. you know what kind of person i am. I actually have learned alot from these forums. there are a ton of good people here. I will just leave him alone and like I said never worry about buying anything from his company. Not that my money matters or my referel business means anyhting to him i guess. Funny thing is im in the car business and we live and die by how we treat our customers. Im pretty sure Matt does too. Just funny how he has to flex his muscles when he feels threatned or if he's wrong. I admit I never said i wanted blue springs. I didnt know what color springs came in them. I just wanted my WG's to not open till 15psi. thats all. Everyone who read my dyno threads knew i was at 26psi. so why would I want 15-23psi springs? i told mat i was running 26psi too... But even in our conversations you talk down to me (the bold sarcastic tone). Either way. matt thanks for the help. I guess i will just go other routes for info in the future.
thor'svr4
10-17-2011, 03:51 AM
i thought i knew how the Forge Wastegates worked but after reading this thread im confused. If i bought an 18psi wastegate i would assume that my wastegate boost will be 18psi. But if i install them and the wastegates open below 18psi i have to add some washers until it opens at 18psi? but if the wastegate opens at lets say 23psi i would need to swap out the springs for a softer set? if its that simple than how do "turn buckles" effect when the wastegate opens?
J. Fast
10-17-2011, 09:31 AM
Springs have a window of predictable operation, a floor and a celing if you will. The yellow spring for example is a 15lb spring. The yellow spring has an adjustment window of 15-23. Wastegate pressure can be fine adjusted to any pressure in the window; 15,16,17,18,19... etc.
Utilizing a vac pump you use the turnbuckle to dial in select pressure and can add shims. Base pressure can be set anywhere in the spring range. Once you exceed the lower or upper limit for wastegate pressure you'll require a different spring. Mikes' wastegates boost creep from 8/9psi... to a fixed 15psi base. Again, the wastegates are cracking open at 8/9. Additionally, the ceiling without spike at a true 6000ft elevation is what I stated.
Mike doesn't want boost creep or boost spike. He wants a predictable target boost so he can tune speed density. Why no problem been discovered yet? Maybe it's because DR is using a MAF based setup and an electronic boost controller, and Mike is using a speed density based setup and an MBC?
futurevr4man
10-17-2011, 10:33 AM
i dont understand why:
1) the boost creeping to the set amount desired would be such a big issue
2) if your tune for speed density is your response to (1) then, why not invest in an electronic boost controller? i have never understood why people cheap out on arguably the most important piece of equipment for the life of the engine (when modifying them).
what are you going to do when atmospheric pressure changes? what about temperature? your manual boost controller will not account for variations in anything... it is a hole that lets xx ammount of air through. the density of that air could be a little or a lot, but the size of that hole will not change, which will in turn change your boost reading/setting.
seems silly to me to cheap out on it when you can find good ebc's for $200
for sin's application, i'm inclined to agree, future. for basic tune where the sky is NOT the limit, mbc's are perfectly fine.
futurevr4man
10-17-2011, 11:27 AM
right. thats why i said (when modifying them). i suppose, i should have added the word "heavily" in there somewhere as well
SnakeSkinner
10-17-2011, 11:48 AM
Wow, you set them for free? Your a modern day fuckin moses.
Ya like the 100 or so free Tech PM's or yours I have replied to you on and help you also for FREE, long before you had ever bought a single thing from me. To this date this is the ONLY thing you have ever bought from me as far as I know. Your welcome for that too.
Your customer service SUCKS!
of my 1000's of customers over the last 14yrs you and Nelson are the only one who seems to be saying that (grate company you are in there). And both of you seem to relate totally just flat out kissing your ass no matter what you say to "customer service", those are 2 different thing. Read threw your threads on this and the other forum, and you seem to have problems with everything you buy and everyone you buy it from... interesting....
I TOO have to deal with customers all the time, but not ONE time do i EVER treat customers how you treat me.
I treat you the way you treat me. Long before you were ever a customer I went out of my way to help you with free tech support, and what did I get for that? You calling me all kinds of names when I finally dew a line in the sand when you started flat out telling me you bought parts from other shops and then contacted me for info on how to install them. And I simply told you to ask the place you bought it from. From that point on I was a a-hole in your eyes and deserving of blasting me any chance you got on the forums and your really surprised how a "treat" you now? Like I said befor even after all of that, I would have sent you the blue springs just to help you out even thow they are NOT what you ordered, till I saw this thread and saw once again how you were blasking me and flat out lying about what you "ordered". So now you reap what you sow, live with it.
You think because you are a king and have all these internet folowers you can say and treat people however you want....and you can.
your on that VERY short list:) Congrats
But I actually am not a dick, just to you apparently. You have taken one of my friends and actually turned him into a monet clone (prick) because he has stars in his eyes from meeting you. Fuck it.
lol, So let me get this strait, one of your friends met me, and thinks i'm a nice/cool guy so now he is a Prick? Man you have problems, you really should seek help.
I dont need anything from you.
You mean other then the 100 or so tech questions you have asked me over the yrs?
Matt get some social skills or you can fuck your turbos everynight "by yourself"
lol, if you only new......
P.S. Get some help with this inferiority complex you have towards me. I'm just a regular guy, there is no resin for you to be so threatened be me that the mere mention of my name brings you to such a frenzy. Go look into a mirror and say "I"M A SUPER STAR" or something....... :)
SnakeSkinner
10-17-2011, 12:12 PM
I wont ever buy anything or recommend you or your products, not because they arent good, by all means they are, but you have the personality of a fucking tick.
Thank god! That's the best news I have herd all week, not only do I not want your business but I would rather not have as a customer anybody that would take advice from the likes of you...:)
Have a nice life. wait...you need to throw in a plug for your billets, you havent done that yet....
O thanks for reminding me! DR Billet turbos rock, and are in stock...:)
familyMAN
10-17-2011, 01:12 PM
Go look into a mirror and say "I"M A SUPER STAR" or something....... :)
That should be in your sig. I about choked on my coffee this morning!
Sin'sVr4
10-17-2011, 01:27 PM
lol. Ok, i dont know if i ate something last night that caused me to black out and post this shit. Wow. Matt, i dont know why i flipped out on you. I really dont. I guess if i feel i get screwed i say whats on my mind at "that" point in time without thinking it over. I am sorry for the misunderstanding. Its cool that we dont do business. Better for my superstarness ;) . I will just buy my upgrades from someone else. But, i will say i was wrong. I admit it. I never said anything abou the blue springs. I thought they were the 15lb springs. I did not know. I am going to say that Matt does give great advice and it is worth its weight in gold because he does know tons. Im just on my period i guess. 3000, sorry too. ill be quiet now. I dont know why Matt freaks me out.
And i didnt call my friend a prick because he thinks your nice....he was just being a dick the other day...i just ran with it
FeaRpb
10-17-2011, 01:41 PM
Hey Matt, just to let you know. You are awesome =)
niterydr
10-17-2011, 02:47 PM
Interesting read. Matt, I better not be on that "short list" :)
futurevr4man
10-17-2011, 03:11 PM
gosh matt, way to piss people off! ;) hahaha
we all make mistakes sin
Sin'sVr4
10-17-2011, 05:10 PM
ive made more lately :/
TT Eric
10-17-2011, 06:02 PM
Matt next time, listen the Lord when he say : ''...go, and do not SIN again" :lol7:
Ok sorry for the lame joke!
Eric
green-lantern
10-17-2011, 07:22 PM
lol. Ok, i dont know if i ate something last night that caused me to black out and post this shit. Wow. Matt, i dont know why i flipped out on you. I really dont. I guess if i feel i get screwed i say whats on my mind at "that" point in time without thinking it over. I am sorry for the misunderstanding. Its cool that we dont do business. Better for my superstarness ;) . I will just buy my upgrades from someone else. But, i will say i was wrong. I admit it. I never said anything abou the blue springs. I thought they were the 15lb springs. I did not know. I am going to say that Matt does give great advice and it is worth its weight in gold because he does know tons. Im just on my period i guess. 3000, sorry too. ill be quiet now. I dont know why Matt freaks me out.
And i didnt call my friend a prick because he thinks your nice....he was just being a dick the other day...i just ran with it
I was going to ask if you were drunk or something. I tried to quote all of your rant's this morning so you could see them together and see how unnecessary it was but my work PC just doesn't work right on this forum. Obviously you see why Matt was fed up with you now though. I'm glad you admitted you were out of line and apologized. I definitely understand your frustration when working on these cars and pouring money into them and not getting the results you want. These days I just step away for a while until I can come back with a clear head.
Jimvr4
10-18-2011, 03:02 AM
Bottom line is it's easy to be wrong even when you think you know your shit inside out. I don't know shit about Forge wastegates but after reading this thread it makes sense that they have to be calibrated to your car's turbo's.
sin's a bitch anyways because he double-posts on both forums, instead of just posting here. yes, we see where your loyalties lie, mr. "i'm not a paid member".
GTOJOE
10-18-2011, 08:23 AM
I think both have been acting like bitches. Sin could have solved thi by a simple message to Matt explaing what was wrong and maybe they could have owrked out what was wrong. Personally I though the same as most ppl. If I order 15ps isprings I expect that they won't crack open till 15psi.... not sure who is at fault there. As for Matt.... I have seen so many posts that just should be coming from someone like him. He jumped all over Sin's turbo thread in order to discredit the product and plug his own. That's extremely poor taste. The thread was not about compairing his to the DR stuff... just an informative thread for others. I also saw Matt post in another thrtead recently that had nothing what so ever to do with him or his turbos but he jumped in there and posted that he had the DR700 instock..... who fucking cares. Create thread about it. Don't spam other threads. Matt your products are awesome but you do act like a clown sometimes. Maybe that's just how you come accross when written... who knows. Either way what I have witnessed has left a sour taste in my mouth and I would think twice at supporting you.........
But no party is innnocent here. Work it our between you and move on. Please don't drag this place down to the 3si level :p
green-lantern
10-18-2011, 08:57 AM
sin's a bitch anyways because he double-posts on both forums, instead of just posting here. yes, we see where your loyalties lie, mr. "i'm not a paid member".
Meh, a lot of people do it. Some don’t care much about the AF thing. I choose to pretty much stay away from the other place but if people want to post there it’s there prerogative I guess.
SnakeSkinner
10-18-2011, 12:04 PM
As for Matt.... I have seen so many posts that just should be coming from someone like him.
I take it you many "should not" , well man I'll talk how ever I like. You cant tell me what I can and cant say. I always wonder were this thing came from that Venders cant speak, when we say things that nobody would even think of jumping on a non vender for we get hung on a cross and rocks thrown at us. lol We are not even allowed to speak our opinions with out being jumped all over. Well sorry I dont play that game, I call a duck a duck... 14yrs later, I'm still here....
He jumped all over Sin's turbo thread in order to discredit the product and plug his own.
That was not how it happened, me and my product were jumped all over and I merely defended it. Once again something a vender is never allowed to do. O well
I also saw Matt post in another thrtead recently that had nothing what so ever to do with him or his turbos but he jumped in there and posted that he had the DR700 instock..... who fucking cares.
Your talking about Panpena's thread about his fuel rails, That post was a mistake and was not suppose to be in that thread. I clicked on a thread up-date link in my E-mail and clicked on the wrong one. That was suppose to be in the Pampena thread that was posted about the DR700 car they had just dynoed, as soon as it was pointed out to me I deleted it and put it in the correct thread. And that post was merely informing people that DR700's could be bought FROM pampena and installed there as well, I was trying to drum up business for them.
Was a simply mistake, o ya another thing a Vender is NEVER allowed to make.
Matt your products are awesome but you do act like a clown sometimes.
You only say that because I'm a vender, because we are suppose to be allowed to be attacked and never defend our selves.
Either way what I have witnessed has left a sour taste in my mouth and I would think twice at supporting you.........
Is that suppose to bother me?
But no party is innnocent here.
What exactly did I do that was wrong? Defend my self and post the TRUTH when I was attacked by 2 people in this thread, One who new the truth and was flat out lying, and the other that had no idea what was going on and jumped all over me too (Jfast)? What was I suppose to do just let my self be attacked and say nothing? Not post the PM's that proved he clearly got exactly what he ordered? Whats sad is that is exactly what some of people on these forums expect venders to do when attacked with lies and BS, is just cower down and kiss everybody ass because they bleave "your a vender and we OWN you, because customers buy stuff from you". I'm not sure were that comes from, because the silent majority does not feel that way. It's just the small percentage of keyboard warriors that got beat up allot as kids or did not get enough hugs at home or something. And what this small group of people has such a hard time understanding and makes them so mad is that people like me dont want people like that as customers any way, so I dont kiss there asses and that makes them so MAD.
I would never think of treating another person like that regardless if I had bought something from them or not, I have venders that I have bought MILLIONS AND MILLIONS of dollars worth of parts from over the yrs and I would not even think of trying to bully them around just because I had, I treat them with the same respect I would treat somebody I just met. In fact most of them I know if I tried some BS like that would just tell me to my business elsewhere.
familyMAN
10-18-2011, 01:50 PM
Not that Matt needs help in this BS thread, but I was surprised by a recent (last week) customer service event with him. Seems appropriate to post here...
I asked Matt a tech question in a PM for a product I wanted to buy from him. He has Boost-a-Sparks and HKS DLI on his website and I was thinking of going with BAS. Matt tells me to get HKS because he has blown fuses randomly with the BAS...Pause...Now you could jump to a conclusion that "of course he wants you to buy HKS, they cost almost twice as much!" ...resume... I replied to Matt that I'll take an HKS DLI and he can add it to my order. He replies that he doesn't have any in stock and not sure when he can get them in because of the HKS USA closing and suggests I buy it from someone else.
Damn, he is just such an evil person. :DevilSmile: I have another example that is way more extreme of his evilness, but that can wait for another day.
Chris@Rvengeperformance
10-18-2011, 03:38 PM
I bought some used turbos from a guy and matt took the time to look up through his records what turbine was ordered with them. Yeah he is harsh sometimes, but that's just the way he is. He honestly will go out of his way to help and never bullshits anyone. He would rather not have a sale than sell you the wrong thing
It may seem like he pushes his products sometimes, but how do you expect a sponsor to behave? He has the best turbo kits available. There may be cheaper ways to go, but if you want the best and want something that actually works and fits out of the box there is no where else to go.
TT Eric
10-18-2011, 05:48 PM
I confirm that, in the past I asked Matt to buy some parts and he told me I don't need them, instead of saying nothing and sell it to me. Even last week I asked him for some parts and he told me he has them, but I should buy something else that would be even better (that he doesn't sell).
One thing I like and respect a lot from Matt (like Ray) : he is knowledgeable person (vendor) that know is sh!t and is actually POSTING, ANSWERING, INFORMING, HELPING people! Where do you wanna brings your business to ?? To vendors that don't post any valuable info, who in fact never post except when they have something for sale or to show off ? Sure, they don't expose them-self to the public and they don't take the risk to be flamed... IMO I prefer seeing a vendor defending himself and helping (contribute) the community freely versus a vendor who never post.
Eric
FeaRpb
10-18-2011, 05:53 PM
@TT Eric,
That is the exact reason why I purchase stuff from Matt.
GTOJOE
10-18-2011, 09:33 PM
I take it you many "should not" , well man I'll talk how ever I like. You cant tell me what I can and cant say. I always wonder were this thing came from that Venders cant speak, when we say things that nobody would even think of jumping on a non vender for we get hung on a cross and rocks thrown at us. lol We are not even allowed to speak our opinions with out being jumped all over. Well sorry I dont play that game, I call a duck a duck... 14yrs later, I'm still here....
No-one is telling you what you can and can't say. Just keep in mind people will judge you based on what they see/read. You can call a duck a duck but understand that some people might get offened if they get called a duck :p
That was not how it happened, me and my product were jumped all over and I merely defended it. Once again something a vender is never allowed to do. O well
There is a difference between defending your own product and calling the others LMI. I totally understand that you would want to defend your product but not a single bad things was said about your actual product. Infact it was stated many times that it is the best TD04 turbo available. IIRC what was said was only refering to the price and that for those that don't need the best and are happy with up to 550whp then the 19T-HL was a good option for much less money.
Your talking about Panpena's thread about his fuel rails, That post was a mistake and was not suppose to be in that thread.
I deleted it and put it in the correct thread.
Wasn't aware of that. My bad.
What exactly did I do that was wrong? Defend my self and post the TRUTH when I was attacked by 2 people in this thread, One who new the truth and was flat out lying, and the other that had no idea what was going on and jumped all over me too (Jfast)? What was I suppose to do just let my self be attacked and say nothing? Not post the PM's that proved he clearly got exactly what he ordered? Whats sad is that is exactly what some of people on these forums expect venders to do when attacked with lies and BS, is just cower down and kiss everybody ass because they bleave "your a vender and we OWN you, because customers buy stuff from you". I'm not sure were that comes from, because the silent majority does not feel that way. It's just the small percentage of keyboard warriors that got beat up allot as kids or did not get enough hugs at home or something. And what this small group of people has such a hard time understanding and makes them so mad is that people like me dont want people like that as customers any way, so I dont kiss there asses and that makes them so MAD.
This could have simply been resolved via PM. I polite msg from either of you guys [he did say he PM'd you] could have solved this. There was an obvious misunderstanding. You explained to him that shimming was an option but that's not what he wanted. He expected the blue springs [without directly asking for them] This was not his fault nore yours. You both had a different idea of what was needed. JFast was trying to support Sin but it made things worse. I think Sin tried to bury the hatchet with you despite the previous fight on the turbo thread and purchased these from you. I think he got a bit worked up when he felt he got the wrong product. Not surprising considering the previous history.
Responses in red. Anyway let's just move on here. The issue has gone as far as it can.
hated
10-20-2011, 02:58 PM
How much do these springs cost, and why is it such a big deal to get it switched out, regardless of who is right or wrong?
LOL! That's what I was thinking. Matt, is that too much for you to just comp him springs? For the record, you were much cooler when you were a nobody.
AdamVR4
10-20-2011, 05:15 PM
Ok, i dont know if i ate something last night that caused me to black out and post this shit.
Holy fuck, you're a jackass. I thought you were going to sell your car. Whatever happened with that?
Sin'sVr4
10-20-2011, 08:37 PM
Holy fuck, you're a jackass. I thought you were going to sell your car. Whatever happened with that?
Thanks^^. Ya like alread said, i was wrong. Should be end of story. And, I got a great offer on my car. Im not sure if i will sell it. the car is perfect and im not sure i can bring myslef to do it. I am done with 3si and might be done with this site based on the reactions of some. I would like to think i contribute to this site with info and or just lightening the mood with cool topics. But, I dont want to start any wars, and thats why i appologized to Matt. I would like to get passed this with him, but thats up to him. I understand the business side of it will severed, but its my fault. Just understand all i wanted to do was get my wastegates to open at 15psi, not 8-9psi. I did the hand pump check and even shimmed they still crack early. Oh, well...too bad, so sad. I get it. Im not an asshole, or a jackass, just a disgruntled owner who over reacted. period. Its cool, this place isnt going to change my life, neither is Matt. I say whats on my mind and sometimes it gets me introuble. But, i dont take shit from anyone and neither does matt so thats y we butt heads often. Either way, sry for the drama. I actually disrespected Alan and all of you for this shit. Im over it, and hopefully we can get back to normal
familyMAN
10-20-2011, 08:43 PM
. I would like to get passed this with him, but thats up to him.
Up to him, eh? Interesting.
well at least they're starting out on the right foot for making amends. neither one can spell. :awesome:
Roybatty
10-20-2011, 11:35 PM
well at least they're starting out on the right foot for making amends. neither one can spell. :awesome:
LOL.
We all say f'd up chit. To not give another chance is narrow minded; everyone should have an opportunity for redemption.
We all practice this to varying degrees...excercise cyber etiquette & definitely have thick skin...these forums can b brutal.
Keep the car!
connected via tapatalk
J. Fast
10-21-2011, 01:40 AM
I dont want to start any wars, and thats why i appologized to Matt. I say whats on my mind and sometimes it gets me introuble... i dont take shit from anyone and neither does matt so thats y we butt heads often. Either way, sry for the drama... hopefully we can get back to normal
It's done Mike. You said what you needed to say and so did Matt. Everything else in here is just to get under your skin. Talking shit on the internet is easy and everything you read on it is 100% accurate information, right? :rolleyes:
I revisited the ol site the other day on E-Doggs acct and clicked on a two year old thread in chatter. I was patronized, a bunch of complete bullshit rumors and lies were started, and spread and a lot of people were standing tall behind a keybord. Some of the shit going down was actually criminal. Only way to get past it is to hit (Function + F4) and walk away.
Interestingly, going back several years later, it really bugged the hell out of me to see wtf went down and what kind of shit people were saying. All I can say is boy people stand tall behind a keyboard and they react much differently in person.
Hey, wouldn't you know it, nearly two years later all the people talking shit don't have running cars or karma has come back on them full circle in some way shape or form. Quite ironic, actually.
Lay down your sword and Hit Fn+F4 and go back to doing what you enjoy. Come back when you are ready.
function+f4? dual screen toggle? p1 (on my laptop)?
oh...you must be ONE OF THOSE PEOPLE.
http://cdn1.knowyourmeme.com/i/000/076/537/original/Super_FUUU_Face.jpg
KeithMac
10-21-2011, 09:56 AM
I have Forge Diaphragm actuators and with the RED (30psi?) springs and half hole pre-load (advised by Forge) they start to crack open at 15psi.. Plus no-one has ever mentioned the effect that exhaust pressure has on the setting while trying to force the flappers open (effectively lowering the spring rate in the actuator).
Yellow springs for me were a waste of time (even heavily pre-loaded)..
AdamVR4
10-21-2011, 11:58 AM
It's done Mike. You said what you needed to say and so did Matt.
He said what he needed to say?! He's claiming he was black-out drunk! That's not an apology at all, nor was anything he said "what needed to be said".
Everything else in here is just to get under your skin.
Yes, us reacting to him running his mouth at a legend of the community is just us trying to get under his skin. He brought this upon himself and he gets to deal with the consequences. He's claiming he was blacked-out (Yeah, I'm sure it was something he ate). This guy has a wife and kid(s) -- no matter what, his "excuse" was full of fail.
Interestingly, going back several years later, it really bugged the hell out of me to see wtf went down and what kind of shit people were saying. All I can say is boy people stand tall behind a keyboard and they react much differently in person.
drmbldr - I'm sure you'd run your mouth at Matt in person, too.
Hey, wouldn't you know it, nearly two years later all the people talking shit don't have running cars or karma has come back on them full circle in some way shape or form. Quite ironic, actually.
It's all about you!
mb7050
10-21-2011, 12:13 PM
Everything you do, everything you say, has consequences and will come back to you. But everybody deserves a second chance.
I'm sure J.fast learned his lesson the hard way, now its sinīs turn.
CoopKill
10-21-2011, 01:45 PM
It's done Mike. You said what you needed to say and so did Matt. Everything else in here is just to get under your skin. Talking shit on the internet is easy and everything you read on it is 100% accurate information, right? :rolleyes:
I revisited the ol site the other day on E-Doggs acct and clicked on a two year old thread in chatter. I was patronized, a bunch of complete bullshit rumors and lies were started, and spread and a lot of people were standing tall behind a keybord. Some of the shit going down was actually criminal. Only way to get past it is to hit (Function + F4) and walk away.
Interestingly, going back several years later, it really bugged the hell out of me to see wtf went down and what kind of shit people were saying. All I can say is boy people stand tall behind a keyboard and they react much differently in person.
Hey, wouldn't you know it, nearly two years later all the people talking shit don't have running cars or karma has come back on them full circle in some way shape or form. Quite ironic, actually.
Lay down your sword and Hit Fn+F4 and go back to doing what you enjoy. Come back when you are ready.
Could not help yourself eh? If it's an end he wants, you are not helping sir...
J. Fast
10-21-2011, 01:46 PM
I'm sure you'd run your mouth at Matt in person, too.
Nah, I'd most likely apolgize for being a douche awhile back and shake his hand. Prolly ask him if he wants to do some pulls :)
It's all about you!
A true Type A personality am I :bigthumb:
futurevr4man
10-21-2011, 02:05 PM
Nah, I'd most likely apolgize for being a douche awhile back and shake his hand. Prolly ask him if he wants to do some pulls :)
:jerkit:
i keed i keed
planeteclipse1221
04-20-2014, 01:28 PM
so I have DR750's and set of these waste gates.(blue springs) how can I be sure I set them rite so I don't have to remove and readjust? I know you all said to pull a vacuum and make sure both flaps open at the same time. but how do I determine what psi they should open at? and why does it matter?
RealMcCoy
04-20-2014, 01:54 PM
Did you read this train wreck of a thread before digging it out of the grave..... :lol:
futurevr4man
04-20-2014, 02:17 PM
jfast and sin... the two biggest baboons on this forum.
jfast and sin... the two biggest baboons on this forum.
one who swears he's never coming back, and the other one who threw in the towel and opted for a naturally aspirated 'murican v8.
TurboSinceBirth
04-20-2014, 04:26 PM
so I have DR750's and set of these waste gates.(blue springs) how can I be sure I set them rite so I don't have to remove and readjust? I know you all said to pull a vacuum and make sure both flaps open at the same time. but how do I determine what psi they should open at? and why does it matter?
Simple. Buy a Mityvac MV8500 NOT the MV8000. The latter won't work. It only does vacuum not pressure. The MV8500 does pressure. It's super simple to set your wastegates with it and you can't slowly make them open up ensuring they're set to the exact pressure you need. You can also get them at parts stores but they'll have to order it first because they only stock the MV8000 which only does vaccum not both.
Amazon.com: Mityvac MITMV8500 Silverline Elite Automotive Vacuum Pump Kit: Automotive (http://www.amazon.com/Mityvac-MITMV8500-Silverline-Automotive-Vacuum/dp/B0002SQYUA/ref=sr_1_1?ie=UTF8&qid=1398021880&sr=8-1&keywords=mityvac+mv8500)
Kx1984
04-20-2014, 06:02 PM
Forge Motorsport | Alloy Fabrication (http://www.forgemotorsport.com/content.asp?inc=product&cat=180201&product=FMDVTUN)
the springs are the same for all wastegates as far as i can tell
mb3000
04-20-2014, 09:49 PM
one who swears he's never coming back, and the other one who threw in the towel and opted for a naturally aspirated 'murican v8.
He sold that and bought a new Evo and dumped like 7k into a 400hp build.
KeithMac
04-21-2014, 08:58 AM
Forge Motorsport | Alloy Fabrication (http://www.forgemotorsport.com/content.asp?inc=product&cat=180201&product=FMDVTUN)
the springs are the same for all wastegates as far as i can tell
You need to clarify that really, the link you've posted is for a Blow Off Valve..
Like I said earlier Reds were the only ones that cut the mustard with my Forge Actuators and TD04-16g's..
TT Eric
04-21-2014, 11:56 AM
I went with reds also. No point for me to set under 20psi.
Eric
Kx1984
04-27-2014, 09:52 PM
Sorry copied wrong link haha
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.