PDA

View Full Version : AWD Will 03-04 cobra wheels fit a 1g VR-4



Disrupter
09-17-2010, 09:23 AM
Tried searching but couldn't really find anything on these wheels (18x9) but found a bunch of stuff on the 17x9's. Here are the specs:
et +26mm
p.c.d 5x114.3
c.b 70.7
http://images.craigslist.org/3n13oa3l25V15Z05T3a9faccbf17a18ec16b0.jpg
And if someone could confirm the wheels in this picture.

Thanks!

Disrupter
09-18-2010, 07:18 AM
Bump??

GFreemenRT
09-18-2010, 09:22 AM
I have the 17x9 versions. I believe Yogurt! was running 18x9's without an issue on a 2G

kjzstealth
09-18-2010, 10:30 AM
I believe I have seen other people running the 18x9 versions with no problems. That is what I would love to have some on my car, but I want the chrome. lol

Nationalmilkman
09-19-2010, 12:51 AM
Quick question, 18x9.5 with an offset of 30mm. Will theystick out the same as 18x9, 24mm offset?

B-Man
09-20-2010, 07:22 PM
They'll stick out worse than the 24mm offset. I have the 17" replicas (not sure the offset) and they clear the calipers by a lot.

http://www.discounttire.com/dtcs/infoWheelOffsets.dos

familyMAN
09-22-2010, 12:18 AM
Plug in the specs of tires/wheels you want to compare here...
Wheel/tire size calculator (http://www.rimsntires.com/rt_specs.jsp)

Nationalmilkman
09-22-2010, 11:29 AM
I ran the numbers on the 18x9.5 with 30mm offset and the backspacing is 6.4" compared to the stock 6.3". So they shouldn't stick out to much. I'll be looking into a set of those now.