View Full Version : 1G pop-up HIDS! limited edition headlights from Lat 42
lat42MS
10-12-2011, 12:25 PM
UPDATE: 5/22/2012
http://www.youtube.com/watch?v=9YxGGr5kVXE
Ok, I should probably start with the best part, pictures.
http://inlinethumb01.webshots.com/32448/2994894600066827514S600x600Q85.jpg (http://family.webshots.com/photo/2994894600066827514OJabXl)
http://inlinethumb09.webshots.com/43976/2937278790066827514S600x600Q85.jpg (http://family.webshots.com/photo/2937278790066827514oBGgeS)
http://inlinethumb18.webshots.com/48273/2947263450066827514S600x600Q85.jpg (http://family.webshots.com/photo/2947263450066827514WrPItw)
These are old pictures from my first prototype. The finished product is still in development, but it'll look and fit much better. I posted up these pictures to give an idea what the finished product will look like.
here's some more info for anyone that's interested.
This isn’t a product you can install yourself. The mounting bracket for the H4666 sealed beam is riveted in place. Converting to projectors requires drilling out the old rivets and installing a new bracket with special rivets (and a pricey riveting tool that I bought for this).
You’ll have to send me your headlights – the whole motor and assembly – and I will convert them. You pay shipping one way and I’ll send them back. It will take me a week at the most to do the conversion, so with ship time expect to be headlight-less for at least two weeks. If it’s your daily driver I may do a core service.
The cost to have your headlights converted is $600. If you think that's too expensive you need to have your head checked, because a lot goes into this conversion.
The lights will come back ready to be installed – just plug them in and they’ll function like stock. changing a bulb will be even easier. They’ll have Hella 60mm high and low projector modules, 9005 bulb on the high beam and 4300k HIDs on the low beam. They’ll be set up and aimed for use on US roads, but as with any aftermarket light, this is not street legal.
I'm calling these a limited edition because I'm only making 10 of them. One set is for me, so that means only 9 other lucky guys will have these lights on their 3S. If you’d like to buy a set, please PM me your name and email address and I’ll add you to the list. I know people will back out, so don’t worry if you’re not one of the first 9. There will be a wait list. Please only put your name on the list if you’re serious and have the money set aside. I will start accepting payments in December and begin converting lights over the following months. Feel free to ask questions if there's anything I didn't cover!
Thanks for the interest and support everyone,
Kurt S.
Latitude 42 Motorsports
kurt@latitude42motorsports.com
Emilie@GZP
10-12-2011, 01:41 PM
Very cool :)
HilbillyHomeboy
10-12-2011, 01:59 PM
Nice work, looks great so far! :cool:
Jeremy
GTO Assassin
10-21-2011, 07:08 AM
Not that I can afford it right now, but living all the ways over here wont help. Looks like a great set up. Maybe one day.
Scotty
lat42MS
01-05-2012, 07:54 PM
I've made some more progress, and I'm to the point where I know it's all going to work out really well. My rivet method and the spacing and size of the lights all work out. It was a challenge; there's not much room for error in those crazy 3S headlights.
I got my hands on the prototype brackets just before Christmas. They took some cutting/welding to fit right. I've already revised the design, just gotta take it to the metal shop again.
http://i41.tinypic.com/6ycwap.jpg
The Hella 60mm projectors come with 9005 bulbs, but I got some HIDs from DDM tuning to replace them. I had to put HID bulbs in both the high and low beam, because the clearance is so tight that only the shorter ends of HIDs bulbs will fit.
Here's my first test - ignore the flickering at the end, just a loose temporary ground.
http://www.youtube.com/watch?v=b70TOTy00WU&context=C35742c4ADOEgsToPDskJsv-ku2NKRht0vbnALBUbg
There are 4 small ballasts that need to be mounted behind the headlight bucket. Other than that, it installs and functions just like a stock unit. Next up is the front bezel - then I'll be ready to do the first conversions. About 6 of them have already been spoken for.
So it's only taken me a full year to get this far. Making stuff like this takes a lot of time!
HilbillyHomeboy
01-06-2012, 11:06 AM
Nice work! Coming along really well. Take your time, and market a quality product. :)
Jeremy
93STLTH
01-07-2012, 12:20 PM
Looking good so far. I might be interested in this depending on how the final product looks. This was something I was hoping to fabricate myself one day, but a ready to install kit would be nice too.
slage
01-07-2012, 02:28 PM
awesome! I'm interested for sure. cant wait for more info and pics :D
FeaRpb
01-07-2012, 02:44 PM
What is the weight difference between stock and this?
Post via Tapatalk
terrets
01-07-2012, 04:25 PM
Looks great. Im definitely interested pending the finished product, the time it'll take you to convert, and the season.
GTOJOE
01-08-2012, 02:43 AM
How are you dealing with cut-off? or is the cut-off built into the projector assembly?
UTRacerX9
01-08-2012, 01:44 PM
Hmm. I've pretty much decided I'm not going to be getting a 98 front bumper at this point (so I won't be using your other fixed headlight kit if I don't) so maybe this is a better way to go if I want HID's.
lat42MS
01-10-2012, 12:33 AM
Thanks everyone! I'll post up some more pictures when I start working on the bezel and it looks more complete.
Looking good so far. I might be interested in this depending on how the final product looks. This was something I was hoping to fabricate myself one day, but a ready to install kit would be nice too.
Yeah, I wouldn't recommend trying to fab these yourself. I've got stupid amounts of time invested, and there is not a lot of room in there. Not to imply that you couldn't do it, just for the time and money you'd have to invest it'd make much more sense to have me do the work for ya = ) A single projector on each side would have been easier, but wouldn't look nearly as cool.
fearpb, the weight difference is negligible. They're about the same as stock, maybe a couple pounds lighter.
The cutoff is part of the projector. I just wanted to show that they're real projectors and not free-form, so you won't be blinding oncoming traffic (I hope).
UT racer, I appreciate you buying the fixed lights and if you're interested in these I'll be sure to give you the best price I can.
GTOJOE
01-10-2012, 02:14 AM
Will a RHD projector be an option? otherwise these will be unusable in the UK, Australia etc
lat42MS
01-10-2012, 12:02 PM
Will a RHD projector be an option? otherwise these will be unusable in the UK, Australia etc
No. These are for US roads only.
aaronatstate
01-11-2012, 08:16 PM
I'm assuming it's a yes, but they will have a surround around the lights right? They wont have that "robo-mod" look? If so, put me on the list :)
Aaron
lat42MS
01-11-2012, 11:31 PM
Yes. There will be a fiberglass piece that covers the front of the assembly. It attaches just like the stock piece, except instead of a square opening it will have two circles. I haven't started on it yet because I have to get the lights positioned correctly first. I want them to look like the car came that way from the factory.
This brings up an interesting question though; does the stealth R/T have the same front bezel as a 3000GT? I've only looked at pictures but they seem the same. I know the R/T lights are more rounded at the corners, but I don't think it should be an issue.
aaronatstate
01-11-2012, 11:39 PM
Yes. There will be a fiberglass piece that covers the front of the assembly. It attaches just like the stock piece, except instead of a square opening it will have two circles. I haven't started on it yet because I have to get the lights positioned correctly first. I want them to look like the car came that way from the factory.
This brings up an interesting question though; does the stealth R/T have the same front bezel as a 3000GT? I've only looked at pictures but they seem the same. I know the R/T lights are more rounded at the corners, but I don't think it should be an issue.
That I do not know for sure. But I think the headlight assembly is all the same, the popup portion anyway. The snake eye's, turns, etc are what's different I think...
aaronatstate
01-12-2012, 12:11 AM
Just looked through my service manuals. There are not separate instructions for the RT and ES/Base Stealth, only when it comes to the snake eyes. The headlight pop up buckets are identical.
lat42MS
01-12-2012, 01:16 AM
I'm not concerned with the buckets, they won't make a difference. There are three exterior pieces - the painted lid, a black bezel surrounding the lid, and a black bezel covering the front. On the R/T, the lid and the bezel surrounding the lid are shaped different. However, I believe the bezel in front is the same on all models. Eh, I'll figure it out when someone sends me an R/T set...
aaronatstate
01-12-2012, 08:39 AM
I'm not concerned with the buckets, they won't make a difference. There are three exterior pieces - the painted lid, a black bezel surrounding the lid, and a black bezel covering the front. On the R/T, the lid and the bezel surrounding the lid are shaped different. However, I believe the bezel in front is the same on all models. Eh, I'll figure it out when someone sends me an R/T set...
I'm pretty sure, at least from all the pictures and everything else I've seen that everything that moves when the popup assembly moves is all the same. Even if there are differences, the popup bucket (and the front bezel) are the same, so all the mounting points are the same.
But I guess we'll find out when I send you my lights :D
Blackmount
01-12-2012, 07:45 PM
Why,not just buy a hid kit for a dsm or 240 tje bulb assembly itself is the same, thats what I was expecting when I opened this... :/
aaronatstate
01-12-2012, 08:08 PM
Why,not just buy a hid kit for a dsm or 240 tje bulb assembly itself is the same, thats what I was expecting when I opened this... :/
Because I dont want a sealed beam replacement bulb that accepts an HID bulb. I think they look horrible. I think this when finished will look factory.
Blackmount
01-12-2012, 08:43 PM
Seems like it would be to expensive tho, rather 2g conversion
aaronatstate
01-12-2012, 09:17 PM
Seems like it would be to expensive tho, rather 2g conversion
Dude, he said it's going to cost $600 bucks...a 2G conversion is WAY more than that, and I like the 1G look WAY MORE.
lat42MS
01-13-2012, 12:48 AM
Why,not just buy a hid kit for a dsm or 240 tje bulb assembly itself is the same, thats what I was expecting when I opened this... :/
Those sealed beam replacement HID kits are awful.
These are high quality Hella projectors, made in Austria, designed for custom and race applications.
But to be honest, it's not even about the lighting upgrade. The conversion drastically changes the look of the car. I'm going to run mine with snake eye deletes and a popup controller, so you'll be able to see them pretty much all the time.
93STLTH
01-13-2012, 02:01 AM
The Stealth R/T headlight pop up cover is different than the 3000GT and Stealth base/ES cover. Also, the inner trim bezels are different too. The outer corners are more rounded than on the other cars. I hope this kit will be installable in either type.
aaronatstate
01-13-2012, 07:20 PM
The Stealth R/T headlight pop up cover is different than the 3000GT and Stealth base/ES cover. Also, the inner trim bezels are different too. The outer corners are more rounded than on the other cars. I hope this kit will be installable in either type.
It doesn't matter that those pieces are different. The pop up assembly that everything attaches to is the same, so any and all mounting points are the same.
lat42MS
01-13-2012, 08:16 PM
No no, 93 Stlth is right. I looked at pictures on ebay and the lower outside corner is just a little more rounded. I'm only going to make a fiberglass mold for the 3000GT bezel. No big problem though; I can cut down the corner and reshape it for anyone that sends in an r/t set. It looks like the difference is only about 1/4 of an inch. It'll take some extra work but I don't mind.
aaronatstate
01-13-2012, 09:03 PM
No no, 93 Stlth is right. I looked at pictures on ebay and the lower outside corner is just a little more rounded. I'm only going to make a fiberglass mold for the 3000GT bezel. No big problem though; I can cut down the corner and reshape it for anyone that sends in an r/t set. It looks like the difference is only about 1/4 of an inch. It'll take some extra work but I don't mind.
I think he's talking about the actual painted piece that goes on top of the assembly to cover it up. Oh well, you'll figure it out when I send my lights in :D
93STLTH
01-13-2012, 11:18 PM
I think he's making the piece so it replaces the plastic bezel, right? In that case, it would be different on the R/T's.
aaronatstate
01-14-2012, 01:59 AM
He says he'll modify it as needed though, so yay! :) I trust him to do it!
lat42MS
02-18-2012, 11:46 PM
Ok, I have an update. I've finished up the revisions on the brackets. Everything is centered and fits right so I'll have the metal shop make reproductions ASAP. In the meantime I'll be working on shaping the bezel. After the brackets are done they'll go to the powder coater for some matte black. We've also got snake eye deletes coming up for sale soon, and if you like our work please follow us on facebook!
Latitude 42 Motorsports | Facebook (http://www.facebook.com/pages/Latitude-42-Motorsports/374349572579979)
Proof I'm still working on it...
http://inlinethumb43.webshots.com/47146/2827519020066827514S600x600Q85.jpg (http://entertainment.webshots.com/photo/2827519020066827514qeBLAn)
http://inlinethumb34.webshots.com/49697/2954050890066827514S600x600Q85.jpg (http://entertainment.webshots.com/photo/2954050890066827514GnZjTn)
terrets
02-19-2012, 02:12 AM
Your getting me excitteedddddd!
aaronatstate
02-19-2012, 11:23 AM
So excited. Can't wait to get these!
Mike-92RT
02-19-2012, 05:16 PM
i would like to have these
lat42MS
03-06-2012, 10:50 PM
I apologize for my awful pictures in advance, but here are a few with them on the car. I found that the HID ballasts fit pretty well in a little space between the turn signal and the headlight. You could easily velcro or sticky tape them down in there so they wouldn't bounce around but you could easily remove/disconnect them. on the R/T you don't have a space there, so R/T owners will have to mount them elsewhere. I also wanted to show the finished snake eye deletes, and the rough shape of a new 1g lip. I'm determined to make the first functional, flexible, polyurethane lip for the 1g.
http://inlinethumb11.webshots.com/48970/2820384940066827514S600x600Q85.jpg (http://entertainment.webshots.com/photo/2820384940066827514aNvILg)
http://inlinethumb17.webshots.com/22096/2530690750066827514S600x600Q85.jpg (http://entertainment.webshots.com/photo/2530690750066827514bCuEjo)
These pictures are a couple days old; the front bezel is almost done and it makes them look 1000x better. more to come...
AdamVR4
03-07-2012, 04:19 PM
Do you already have 9 people ready and waiting? You've got it shown with the snake-eye delete... Safe to assume you can use the snake eyes if you wish?
lat42MS
03-07-2012, 05:36 PM
yes, that's a safe assumption. They work fine with the factory snake eye lenses.
I've got a lot more than 9 people waiting. Now that they're almost finished I'm getting a lot of interest. We'll see how the first 10 sets go, and if it all works out well I may make another 10.
aaronatstate
03-08-2012, 08:29 AM
Looks good! Can't wait to get them! :w00t:
Do you already have 9 people ready and waiting? You've got it shown with the snake-eye delete... Safe to assume you can use the snake eyes if you wish?
Good thing I got my name on the list right away!
lat42MS
03-29-2012, 04:38 PM
http://sphotos.xx.fbcdn.net/hphotos-ash3/553034_415630275118575_374349572579979_1781079_190 8276928_n.jpg
-Hella order finally came in
http://sphotos.xx.fbcdn.net/hphotos-ash3/s720x720/543519_415630368451899_374349572579979_1781082_107 6524141_n.jpg
-Brackets are finished, already took them to the powder coater
http://sphotos.xx.fbcdn.net/hphotos-ash3/525479_415633531784916_374349572579979_1781089_534 351933_n.jpg
-bezel, fascia, fairing, cover... whatever you want to call it. This is a far cry from the finished product; I just wanted to show all you patient customers that it's coming along.
I'm hoping to do another video next week with both headlights and the bezel finished. Stay tuned!
We update our facebook weekly, so if you want to stay up to date with Lat 42 Like us on Facebook (http://www.facebook.com/Latitude42Motorsports)
terrets
03-29-2012, 09:41 PM
Wooo Hooo!
Good things are worth waiting for :D
lat42MS
04-08-2012, 12:31 PM
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/530417_421586144522988_374349572579979_1800436_604 946798_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-prn1/s720x720/523386_421586194522983_374349572579979_1800437_123 0776232_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/389276_421586217856314_374349572579979_1800438_130 2912129_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/405054_421586377856298_374349572579979_1800440_125 6720213_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/554166_421586427856293_374349572579979_1800441_564 360550_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/553062_421586467856289_374349572579979_1800442_158 0006216_n.jpg
Sorry I can't take better pictures but the car is up on the lift all torn apart.
So one side is finished, but I still have to make an identical faring for the other side. It'll still be a month or two before I'm ready to actually start doing conversions for everyone. I'm trying some new casting methods using special brush on plastics that will hopefully save time and money in the long run.
lat42MS
04-08-2012, 12:36 PM
Oh, one more thing - You can see I added a little ridge in between the lights to break up the space. The whole fascia piece looked too square to me and I didn't feel like it fit with the round lights. What are your thoughts? It's there to stay, but I can bring the ridge down or make it less pronounced.
terrets
04-08-2012, 02:55 PM
Can you snap a picture with the snake-eyes in?
slage
04-08-2012, 11:33 PM
sweet!!!!
HilbillyHomeboy
04-09-2012, 11:55 AM
That looks incredible!
Jeremy
lat42MS
04-09-2012, 03:37 PM
Can you snap a picture with the snake-eyes in?
Sorry, I only have one snake eye lens and its the side that isn't finished. You'll have to use your imagination.
terrets
04-09-2012, 04:09 PM
Sorry, I only have one snake eye lens and its the side that isn't finished. You'll have to use your imagination.
/Triesclosingeyesandimaging
Ya that didnt work :P.
They still look awesome. And I bet they are a major upgrade in light.
Oh, one more thing - You can see I added a little ridge in between the lights to break up the space. The whole fascia piece looked too square to me and I didn't feel like it fit with the round lights. What are your thoughts? It's there to stay, but I can bring the ridge down or make it less pronounced.
Looks fine as is, I think.
Very well done. :)
lat42MS
04-21-2012, 09:19 PM
Thanks for the encouraging words everyone! I got the brackets back from the powder coater and made a little more progress.
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash2/150761_435461049802164_374349572579979_1840248_139 9604524_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-prn1/563075_435465613135041_374349572579979_1840256_892 178956_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/374170_435466673134935_374349572579979_1840258_182 8073444_n.jpg
aaronatstate
04-26-2012, 11:48 PM
I am so excited for these. I can not wait to get them.
aaronatstate
05-13-2012, 06:05 PM
Any more updates?
terrets
05-13-2012, 09:47 PM
Yaa I want to know to. Do you have a list of people? How many on it?
lat42MS
05-14-2012, 11:33 PM
sorry I haven't updated lately, I've been busy getting the car back together for the NG. The first set is wired up and installed on my car. I should have it registered and on the road next week; then I can test drive it and give the lights some real world experience. I've been meaning to post up pictures and a video but I'm kind of waiting until I can get the car off the lift.
I also have a set of R/T headlights on the way. They were sent to me by the first customer, a guy from Canada by the name of Gerry. I don't believe he's on the forums. I'll post some pictures once I tear into those :)
There is a long list of people interested in this product. Enough to keep me busy for many many months.
lat42MS
05-22-2012, 09:23 PM
How's this for an update? took me the better part of a day...
http://www.youtube.com/watch?v=9YxGGr5kVXE
I've officially started converting the first customer set!
terrets
05-22-2012, 09:26 PM
Are the lights adjustable? Also I really wish I wasnt so broke :(
HilbillyHomeboy
05-22-2012, 09:28 PM
Wow, those look phenomenal. Thanks for taking your time and doing it right. :)
Jeremy
slage
05-23-2012, 02:58 AM
i love it. im definitely in!
lat42MS
05-24-2012, 12:00 AM
i love it. im definitely in!
Alright! I'll add you to the list... though it will be quite a while before I get to it. Unfortunately I'm the only employee at lat 42 :(
lat42MS
06-15-2012, 10:20 AM
Haven't updated this in a while... I totally finished the first set and have thoroughly tested it. The new lights look amazing and work awesome. They have to be one of my favorite mods of all time :)
I'm also just about done with the first customer set. It's for an R/T so I have to make a separate cover and mold for it.
http://i50.tinypic.com/2lxf395.jpg
http://sphotos.xx.fbcdn.net/hphotos-snc6/252222_477281822286753_907400306_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/303351_477281888953413_446887946_n.jpg
http://sphotos.xx.fbcdn.net/hphotos-ash4/s720x720/389673_477281912286744_2015428767_n.jpg
FeaRpb
06-15-2012, 11:25 AM
Looks nice
Boomer3000
06-15-2012, 11:32 AM
Looks really clean. Anything for a stealth yet?
aaronatstate
06-15-2012, 02:22 PM
I'm also just about done with the first customer set. It's for an R/T so I have to make a separate cover and mold for it.
Looks really clean. Anything for a stealth yet?
......
Looks really clean. Anything for a stealth yet?
In for that news...
lat42MS
06-16-2012, 03:42 PM
......
Haha, thank you. The stealth cover is basically the same as the 3000GT cover, it's just a little more rounded at the corner to accommodate the R/T turn signal. Instead of cutting and modifying the 3000GT covers every time I get a customer with an R/T, I'm going to make a separate mold for the R/T covers.
slage
06-16-2012, 06:35 PM
Very cool, i love it :D
What does the beam pattern look like?
Boomer3000
06-17-2012, 03:02 PM
Very interested in seeing the mock up on the stealth. It would help me decide if it should be something considered. Looks great on the 3000gt none the less
stealthknight619
06-17-2012, 03:31 PM
Also interested in the stealth RT option
Sent from my MB855 using Tapatalk 2
lat42MS
06-17-2012, 05:33 PM
Very cool, i love it :D
What does the beam pattern look like?
http://i606.photobucket.com/albums/tt142/RadioflyerCustoms/IMG_0903.jpg
^ Like that :)
lat42MS
07-12-2012, 11:39 PM
Time for a quick update - I'm almost finished with the first R/T set. It looks similar to a standard set, but if you look at the outside corner you'll notice it's more rounded.
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/561173_493848463963422_1870050932_n.jpg
It's such a time consuming process. I also stripped and painted the covers for this customer at no cost, which isn't typically part of the conversion service. I just wanted them to look good for the sample pictures :)
stealthknight619
07-12-2012, 11:43 PM
Good job... I would want at RT set when the time comes
Sent from my MB855 using Tapatalk 2
75blackray
07-15-2012, 01:21 PM
Time for a quick update - I'm almost finished with the first R/T set. It looks similar to a standard set, but if you look at the outside corner you'll notice it's more rounded.
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/561173_493848463963422_1870050932_n.jpg
Those look awesome. You did a really good job on these. I may pick up a set, if you are still doing these for a while.
It's such a time consuming process. I also stripped and painted the covers for this customer at no cost, which isn't typically part of the conversion service. I just wanted them to look good for the sample pictures :)
Those look awesome. You did a really good job on these. I may pick up a set, if you are still doing these for a while.
lat42MS
08-10-2012, 01:22 AM
Haven't bumped this in a while. I just wanted to let everyone know I'm still doing these.
I'm still waiting on Sin's headlights to show up but once they come in I will be able to convert them pretty quick. Next up is Lucas M. It's going to be interesting shipping these to Poland...
jspecmike
08-10-2012, 11:06 AM
Not sure if it's just my browser but I cant see the pictures :*(
lat42MS
08-17-2012, 11:40 AM
Not sure if it's just my browser but I cant see the pictures :*(
That's no good! Well you can always visit our facebook page, Latitude 42 Motorsports | Facebook (http://www.facebook.com/Latitude42Motorsports) and check out the photos there. Or do a youtube search for Latitude 42 Motorsports and see them in action.
Not surprisingly, more than half the people interested in this mod have backed out or are otherwise unprepared! So I'm working through the list pretty quickly, lol. Aaronatstate is up next!
jspecmike
08-20-2012, 09:18 PM
That's no good! Well you can always visit our facebook page, Latitude 42 Motorsports | Facebook (http://www.facebook.com/Latitude42Motorsports) and check out the photos there. Or do a youtube search for Latitude 42 Motorsports and see them in action.
Not surprisingly, more than half the people interested in this mod have backed out or are otherwise unprepared! So I'm working through the list pretty quickly, lol. Aaronatstate is up next!
very nice finished looking product :-)
Tigchamp
08-27-2012, 04:27 PM
No. These are for US roads only.
Thats me & a lot of potential customers out then.
Jeff
Boomer3000
08-27-2012, 10:43 PM
Would still love to see the pics of them ON a stealth...Paaaaease lol
lat42MS
08-28-2012, 12:47 AM
Thats me & a lot of potential customers out then.
Jeff
Sorry, but the beam pattern is angled so it doesn't blind oncoming traffic to the left. If you're driving on the other side you'll have quite a few pissed off people in the other lane...
I don't even think Hella makes a RHD version of the 60mm, but even if they did I've got my hands full enough with LHD customers.
Would still love to see the pics of them ON a stealth...Paaaaease lol
I know! Me too, believe me. I shipped out an R/T set on Friday and the customer promised he'd send pictures. I'll be sure to post them up ASAP.
Tigchamp
08-28-2012, 03:59 PM
You can bet your life on hella making a RHD version of the 60mm.
As they make a RHD version & LHD version of the MK1/Gen1 headlight which is recognised in the UK & Europe as the best standard (non HID) upgrade for the pop ups.
Would it be possible to ship the internals without the light units if I could source them here, I am sure that If I can rebuild my GTO with a few simple instructions I could build your pop up conversion.
Read my build thread in my signature.
Jeff
GTOJOE
08-28-2012, 07:37 PM
Just pull the lamp apart and reverse the cut off plates.
Sent from my GT-I9000 using Tapatalk 2
lat42MS
08-30-2012, 10:16 AM
Would it be possible to ship the internals without the light units if I could source them here, I am sure that If I can rebuild my GTO with a few simple instructions I could build your pop up conversion.
Read my build thread in my signature.
Jeff
Yeah, I would consider doing something like that. PMing you now.
Tigchamp
08-30-2012, 04:20 PM
PM, replied:D
Jeff:cool:
GTO Assassin
10-14-2012, 10:41 PM
Just pull the lamp apart and reverse the cut off plates.
Are these still available and is changing the blocking plate over easy enough?
Scotty
GTOJOE
10-15-2012, 09:04 PM
Are these still available and is changing the blocking plate over easy enough?
Scotty
Come on Scotty. You know your too lazy to do it :p
GTO Assassin
10-16-2012, 12:25 AM
I was going to send it over to you with the speedo cluster. :D
Scotty
lat42MS
10-16-2012, 01:49 AM
Scotty, these are no longer available, at least not this year.
It looks like there is still some healthy demand, so I'm thinking of doing another run next year. I am planning to offer a DIY kit with instructions in addition to the conversion service. Might be a good choice since shipping the whole assembly back and forth would cost a fortune. I'm not sure how difficult it is to change the blocking plates. You could also get RHD versions of the modules from Hella, or you could rotate the modules by drilling new mounting holes. If you want a set next year let me know!
Pictures courtesy of Courtney C. and Beasting:
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/8193_539837989364469_1703446503_n.jpg
http://i1039.photobucket.com/albums/a474/megabeastful/IMAG0119.jpg
http://i1039.photobucket.com/albums/a474/megabeastful/IMAG0120.jpg
http://i1039.photobucket.com/albums/a474/megabeastful/IMAG0121.jpg
http://i1039.photobucket.com/albums/a474/megabeastful/IMAG0122.jpg
http://i1039.photobucket.com/albums/a474/megabeastful/IMAG0123.jpg
http://i1039.photobucket.com/albums/a474/megabeastful/IMAG0124.jpg
Tigchamp
10-16-2012, 05:46 PM
I am in the process of doing RHD version at the moment having had Kurt ship out the brackets & shrouds, these are of realy good quality.
I did source the RHD 60mm projectors from Hella but they are realy expensive, I will post up pictures when I have finished, havn't had a lot of time lately been working.
Jeff
GTO Assassin
10-17-2012, 02:05 AM
Well, it's a 99 conversion (which I really don't want to do) or these. At this stage, I'de be very interested if you do another run next year and I can easily enough change them over to RHD.
Scotty
GTOJOE
10-17-2012, 05:58 AM
There are many many things you need to do to your car before these Scotty :p . Just sit back and wait and a set will turn up because someone needs to money or with enough interest he will make these again.
Tigchamp
11-19-2012, 06:07 PM
Here are some pics of mine with Quad Halo's & 55W quick start HID's
Jeff:coo3l:
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadProjectors002.jpg
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadProjectors001.jpg
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadProjectors004.jpg
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadProjectors003.jpg
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadProjectors005.jpg
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadPOPUPS004.jpg
http://i817.photobucket.com/albums/zz93/Tigchamp/QuadPOPUPS002.jpg
HilbillyHomeboy
11-19-2012, 06:31 PM
That looks completely amazing. I love your car, all around. :)
Jeremy
Tigchamp
11-19-2012, 06:53 PM
That looks completely amazing. I love your car, all around. :)
Jeremy
Thanks Jeremy,
BTW the last pic is Dip beam (low beam)
Jeff
lat42MS
11-20-2012, 11:56 AM
Jeff, that looks incredible! You did a top notch job with the install. Now I'm really considering selling a DIY kit similar to what I sent you. Thank you for posting all those pictures, and I especially like the decals on the active aero panel. Nice touch.
Tigchamp
11-20-2012, 05:50 PM
Jeff, that looks incredible! You did a top notch job with the install. Now I'm really considering selling a DIY kit similar to what I sent you. Thank you for posting all those pictures, and I especially like the decals on the active aero panel. Nice touch.
Hi Kurt, Making the lights up was prety easy to be honest, but it did take a while to get everything set up properly, I had a litle dificulty getting the aim of the mains low enough.
I achieved this in the end by using all 4 bolts on the mains and locking off the top of the lights to enable enough tilt.
My front Aero is down all the time to make room for the Dejon SMIC's and also the IC pipe that normaly runs above the radiator is inside there, the rear Aero still works as I have one of those electronic cheat things that 3SX used to sell.
The centre "Active Aero" decal is standard on JDM GTO's. I just thought the 3SX & AEM ones made it more balanced.
Jeff
75blackray
12-27-2012, 09:56 PM
Bump. Did I miss the pic of the rt lights installed?
lat42MS
12-28-2012, 11:24 PM
http://www.latitude42motorsports.com/20121014141746.jpg
http://www.latitude42motorsports.com/016vyo_op_800x450.jpg
http://sphotos-b.xx.fbcdn.net/hphotos-snc6/248947_560273070654294_1857818425_n.jpg
I'm all done doing conversions for this year, but there are more sets in the making. I'm going to offer a DIY kit next time and possibly sell it through 3SX. Thanks everyone for the support and feedback! I look forward to continuing to serve the 3S community :P
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.