PDA

View Full Version : Will a 6A1 Mitsubishi Twin Turbo Manifold fit on a 6G72?



J. Fast
10-07-2011, 01:55 AM
This is interesting. Anyone ever seen one before? I swear this intake manifold looks like it would bolt right on?

Mitsubishi 6A1 engine - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Mitsubishi_6A1_engine)

DocWalt
10-07-2011, 11:37 AM
Uh... Why? Also, the flange is probably smaller, because the entire engine is smaller.

mb3000
10-07-2011, 05:09 PM
Drivers side tb. Looks like it flows better than the Sebring mani people seem to be using nowadays.

But what do I know? :dontknow2:

DocWalt
10-07-2011, 09:07 PM
I can't find any pictures of the flange, and I only have the US version of ASA so I can't check that. :(

NickS VR4
10-07-2011, 11:44 PM
What about a Diamante Intake Manifold? Looks like it bolts up the same and is Drivers side.

Edit: I'm looking at the Diamante 6G74 surge tank which is drivers side. Does the 6G74 manifold bolt up directly to the 6G72 lower plenum?

Edit 2: According to Stealth 316, the 6G72 manifold will bolt up to the 6G74 lower plenum, so the reverse seems to be true.