View Full Version : Ecu mod ,n/t and turbo
marks
09-29-2011, 02:20 PM
I hope the pix posted to this tread.i have went through 3 ecu control moduels,and am getting tired of it.did you ever notice how hot your ecu gets! Very hot,i had 3heat failers already ,and getting expensive.so what I did was took the ecu out of the car and mounted a computer fan to the center of the cover,cut the centee out to match fan,on the 3 sides of the ecu drill 3/8 inch holes,at least six on each of the sides ,for air movement.the fan is mounted to blow the aor away from the ecu,u can get a 12 v fan from a old computer,use the power supply fan if nothing else.if pix did n(t post email me.
green-lantern
09-29-2011, 03:29 PM
I have to wonder if you have some short in your harness that’s causing the ECU to burn out. How long did it take you to go through the 3 ECU’s? I’ve never noticed mine to get hot but I don’t really feel it when the car is running. I have pulled it out right after I’ve run the car though.
marks
09-29-2011, 04:53 PM
I have to wonder if you have some short in your harness that’s causing the ECU to burn out. How long did it take you to go through the 3 ECU’s? I’ve never noticed mine to get hot but I don’t really feel it when the car is running. I have pulled it out right after I’ve run the car though.
Each lasted about a year,there is no short,car runs execelent,on a hot day or a very long run,you did not notice how hot it is where the ecu is mounted,its right above the exhaust pipe.any way mine gets screamin hot,i drive a sl ,so it has the digital heat and a/c cintrol panel,that also gets hot,but never had a problem with it
The fan keeps the ecu nice and cool now,in fact the car seems to run better.
Alex3000gt
01-13-2012, 10:57 PM
Heat from the heater core located inches away wouldn't help either.
You are the only one I have ever seen diagnose it as a heat failure. What specifically is breaking from heat?
marks
01-14-2012, 09:29 AM
Heat from the heater core located inches away wouldn't help either.
You are the only one I have ever seen diagnose it as a heat failure. What specifically is breaking from heat?
i have read many ,many articles from people about there car running like a piece of sh...,people changing many ,many, parts. i am one of them and it all comes down to a bad ECU/ECM . until i got me a couple of computers to use as test moduels did i realize it was the computerts burning up from heat failure. i went through 3 of them myself and got tired of it.paying these high prices for a new one or a remanufactured one , all 3 computers had different components fail,and all acted differently. just depends on which componets fail from heat first. i have worked on electronics for the better part of 30 years now. and my ecus failed from heat . my car is running great now ,the ecu stays nice and cool now,they really heat up inside the center compartment. i even mounted the computer ,temporarly ,next to the gas peddle ,right by your leg. took it for a long ride and the ecu got quite hot just sitting there,so imagine how hot it would get being mounted next to the heater core,and being directely located up from the exhaust pipe.and in a enclose compartment,so now lets put a couple of turbos in there and we are really gonna have some heat problem.
DONT FORGET TO DRILL AT LEAST SIX HOLES ON ALL 3 SIDES OF THE ECU,total of 18 holes(i did not include a pix of the holes,sorry) about 4/16" to maybe 1/2" ,and that the fan is blowing air through the holes ,across the ecu and out the fan.do not blow into the ecu.you will have the same problem.
this is why they are so many cars running like crap,and people cant figure them out.this is a great mod. it works great and keeps your electronics running on the cool side .try it ,you will not be dissapointed.just make sure you put some kind of a gasket between the fan and the ecu cover,i tried gasket material but found out silicone works best.
green-lantern
01-14-2012, 05:41 PM
What about dust and other crap getting in there? Might be a good idea to put some type filter over the holes to keep crap out. You have me tempted to attach a thermocouple to the ECU just to see how hot it gets.
stealthee
01-14-2012, 06:10 PM
No need to cut a hole in the case. Cooling the case itself will help the ECU dissiapate heat better.
And yes ECU's get hot, they all do, but I haven't had an ECU failure in 9 years of ownership. The reason people lose ECU's is because of the first gen capacitors. I don't think you are even close to being on the right track.
marks
01-15-2012, 09:37 AM
No need to cut a hole in the case. Cooling the case itself will help the ECU dissiapate heat better.
And yes ECU's get hot, they all do, but I haven't had an ECU failure in 9 years of ownership. The reason people lose ECU's is because of the first gen capacitors. I don't think you are even close to being on the right track.
the case is not a component cooler,nor is it attached to and soldered to any components .it could be cooled by an external fan not attached to any ecu.(wont work as good)it was not made to draw heat away from the ecu.
stealthee
01-15-2012, 11:41 AM
You don't understand. The case holds the heat. By cooling the case, you will keep the board cooler, but the fact of the matter is the heat is not the issue. If it was there would be a far higher percentage of loss of ECU's. The only 3/s cars that lose ECU's are 1g's, or cars with a short in the harness somewhere.
marks
12-21-2013, 09:19 PM
its been the better part of 2 years now,and my 1G has not had a ecu failure,knock on wood,haha....
the caps were changed in all the ecu i have tried,none failed from leaking caps,as they were all repaired in time.
so,i would have to speculate that they all died from heat failure...i dont have a thermocouple to attach,to get a accurate
degree of heat built up....but i do know it is quite hot.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.