PDA

View Full Version : Battery "relocation"



x2xtreme360
09-25-2011, 02:52 PM
Got the idea from badass3000 on another thread. Decided to try it out myself.

http://i89.photobucket.com/albums/k226/X2Xtreme360/downsized_0925111338.jpg

Washer tank, battery tray, and tray bracket deleted. It sits flush with the inner wheel well, as you can see, so a tie down is going to be simple. The stock one might even work. It literally slips right in there perfectly. All I did was twist the EVAP hard line and fuel send line just a tad so the battery would fit.

Badandy247
09-25-2011, 03:43 PM
probably try it out tomorrow myself, thanks!

Gearheadvr4
09-25-2011, 08:06 PM
What is the battery sitting on? Could you relocate the shelf?

I've wanted to move the battery but in a Spyder there's no options under the rear tonneau cover.

x2xtreme360
09-25-2011, 08:41 PM
Frame rail. It literally fits perfect. Almost doesn't move at all with no tie down.

IPD
09-25-2011, 08:45 PM
very interesting....

rawavr4
09-25-2011, 08:58 PM
The stock fuel filter doesnt get in the way?

x2xtreme360
09-25-2011, 09:01 PM
You know, I actually forgot that the stock filter sat there:p

I don't have a stock filter, and I no longer have that bulky bracket. My filter is actually quite small, and is attached right to the hard line coming from under the car.

This would be great for anyone who doesn't have the stock fuel filter.

Badandy247
09-25-2011, 09:05 PM
Now I guess I know what I'm doing with my extra AN line and fittings. Time to order some adapters....

Bluejediz
09-25-2011, 11:03 PM
Check this out: http://www.3si.org/forum/f1/anybody-ever-move-their-battery-somewhere-besides-trunk-522851/index2.html
He has a stock fuel filter. But he made little brackets for the tray to sit on.

x2xtreme360
09-25-2011, 11:12 PM
His battery must be not as wide as the Optima. His setup is what I did, just without using the tray. I can honestly say that I doubt there's enough room to clear the stock filter using the Optima.

HLxDrummer
09-26-2011, 10:24 AM
Bummer I was planning to do this soon just needed to find a way to make a tie-down but I have stock fuel filter still and an Optima :(

x2xtreme360
09-30-2011, 01:58 PM
UPDATE: I had chance to fab up a tie down. Turns out it was very simple. I originally was going to drill a small hole in the subframe (you can tell obviously), but since the space is so cramped in that area, I couldn't get a good angle on the dremel. I just happened to have some scrap aluminum lying around, so I simply removed one of the trans bolts (it literally lined up with the battery perfectly) and installed a small piece of aluminum for the "hook". The results:)

http://i89.photobucket.com/albums/k226/X2Xtreme360/GOPR1238.jpg
http://i89.photobucket.com/albums/k226/X2Xtreme360/GOPR1239.jpg
http://i89.photobucket.com/albums/k226/X2Xtreme360/GOPR1242.jpg
http://i89.photobucket.com/albums/k226/X2Xtreme360/GOPR1243.jpg
http://i89.photobucket.com/albums/k226/X2Xtreme360/GOPR1245.jpg

vroom4
09-30-2011, 02:26 PM
I dont think Id like my battery posts way down there. Y pipe blows off, your fixing to weld it to the battery.

x2xtreme360
09-30-2011, 02:41 PM
It would be incredibly difficult for the Ypipe to fall down that far and hit the posts with all the various lines in the way. Plus, the other end of the ypipe usually holds it up.

As for me, Tbolt clamps and 4ply silicone couplers, my Ypipe ain't goin nowhere;)

Badandy247
09-30-2011, 02:44 PM
I dont think Id like my battery posts way down there. Y pipe blows off, your fixing to weld it to the battery.

Post covers are an option, and your y pipe blowing off the tb and the charge pipes at the same would be pretty unlikely IMO.

rawavr4
09-30-2011, 04:34 PM
I just bought the right size battery so mine should fit down there now.

AdamVR4
09-30-2011, 06:25 PM
Is that low enough to fit a liquid to air IC above it?

UTRacerX9
09-30-2011, 06:37 PM
I don't understand why you did this to be honest. It doesn't really "free up" any space in the engine bay, it just makes the empty space that normally is below the battery, now on top. It looks like it's harder to change out now, and certainly not as easy to get to as a battery mounted in the back. You also don't get the weight distribution benefits by moving it to the back, and I would personally be worried about placing a battery below where the stock fuel filter goes.

x2xtreme360
09-30-2011, 11:53 PM
I don't understand why you did this to be honest. It doesn't really "free up" any space in the engine bay, it just makes the empty space that normally is below the battery, now on top. It looks like it's harder to change out now, and certainly not as easy to get to as a battery mounted in the back. You also don't get the weight distribution benefits by moving it to the back, and I would personally be worried about placing a battery below where the stock fuel filter goes.

Seriously? So, instead of having to remove a tie down and battery, you would rather go through the hassle of removing the battery, battery tray, battery tray bracket, and wiggling out the washer tank every time you want to access your fuel filter or lines? Not really sure how this doesn't free up any space. It get's rid of 3 things that take up a lot of unnecessary space.

To each his own I suppose. I thought of moving it to the back. But I didn't want to go through the hassle of installing a killswitch and vented battery box AND lines back there. This took all but no time to do, got the unsightly battery out of that area, and now it's hidden down low. Things on the firewall are easier to get to now, and I don't have to fight for clearance everytime I want to pull the Ypipe off the Tbody.

If you want to argue about weight benefits, now I have a lower center of gravity:rolleyes: Not quite sure why you'd be worried about it being 6 inches closer to the fuel lines.

mb3000
09-30-2011, 11:56 PM
I routed my lines in 15 minutes this morning :p

x2xtreme360
09-30-2011, 11:58 PM
I routed my lines in 15 minutes this morning :p

I routed mine in zero minutes, and paid no money to do it:p:p

Sin'sVr4
10-01-2011, 01:30 AM
i have the same thing. i love how mine cleans up the engine bay. mine sits perfectly on the cross member and is alot easier to install the TBpipe. I also like the fact that my BOV isnt cramped right on the battery anymore.

UTRacerX9
10-01-2011, 01:46 AM
Seriously? So, instead of having to remove a tie down and battery, you would rather go through the hassle of removing the battery, battery tray, battery tray bracket, and wiggling out the washer tank every time you want to access your fuel filter or lines? Not really sure how this doesn't free up any space. It get's rid of 3 things that take up a lot of unnecessary space.

To each his own I suppose. I thought of moving it to the back. But I didn't want to go through the hassle of installing a killswitch and vented battery box AND lines back there. This took all but no time to do, got the unsightly battery out of that area, and now it's hidden down low. Things on the firewall are easier to get to now, and I don't have to fight for clearance everytime I want to pull the Ypipe off the Tbody.

If you want to argue about weight benefits, now I have a lower center of gravity:rolleyes: Not quite sure why you'd be worried about it being 6 inches closer to the fuel lines.

I don't have to remove anything to access my fuel filter and fuel lines, because my battery is in the back. I also run a Hawker style sealed battery, so no need for a battery box. But you don't see a danger of having the battery now mounted right next to your fuel filter??? If you were leaking fuel while running high boost pressure, now you have an increased risk of dousing your battery terminals with gasoline, not a good combination.

92pearltt
10-01-2011, 02:02 AM
Good shit once I pick up a smaller battery for my 94 I am going to do this. Nice, easy and free, also gets the battery out of view. No reason to put it in the back when you can do this. Also I highly doubt you use your car extreme enough as to where having the battery in the back benefits you from weigh distribution.

Blackmount
10-01-2011, 02:10 AM
STM: 3000GT / STEALTH SMALL BATTERY KIT (http://www.streettunedmotorsports.com/parts/stm_3000gt_stealth_small_battery_kit.htm) I was looking at getting this...

x2xtreme360
10-01-2011, 09:01 AM
I don't have to remove anything to access my fuel filter and fuel lines, because my battery is in the back. I also run a Hawker style sealed battery, so no need for a battery box. But you don't see a danger of having the battery now mounted right next to your fuel filter??? If you were leaking fuel while running high boost pressure, now you have an increased risk of dousing your battery terminals with gasoline, not a good combination.

The filter is still way down low by the battery. So the chances of leaking fuel spraying up over the battery is very slim. It's also pointed away from the battery.

Sealed battery or not, NHRA wants a sealed and vented box in a hatchback. My relocation cost me no money, which wouldn't have happened if I had to put it in the hatch.