PDA

View Full Version : rad fan issue



x2xtreme360
09-25-2011, 12:44 PM
I rewired the driver side AC fan to work as the rad fan. I took the resistor out of the equation so there is only high speed.

Verified correct fan operation with my HHH logger. Fan works on both speed settings. Also unplugged the coolant temp sensor on the water housing and the fan started spinning right away.

Problem is, the car gets pretty hot and the fan still wont come on by itself. Aftermarket gauge reads around 212*F (which is about 206*F on the logger) and the fan STILL wont come on. The old rad fan would come on if it got this hot IIRC.

Why?

Hans@GZP
09-25-2011, 02:55 PM
could be a bad temp sensor. Did you try turning on the AC to see if the passenger fan comes on?

x2xtreme360
09-25-2011, 02:57 PM
I haven't because the control unit is currently out of the car.

Does the temp sensor supply the coolant temp info to the logger? If so, the temp sensor is fine, because the logger is reporting proper coolant temp.

Hans@GZP
09-25-2011, 03:29 PM
True story.

You would have to check power at the relays to make sure the ecu is trying to trigger the fan.

x2xtreme360
09-25-2011, 03:41 PM
I am just assuming here that the logger function uses the stock circuit to power the fan. That's why I'm so confused. The logger can command the fan on both the high and low speeds (even though both speeds are just high for me).

Hans@GZP
09-25-2011, 03:55 PM
so, now you know that the ecu is not triggering the fans to turn on.

GTOJOE
09-26-2011, 10:11 AM
I haven't because the control unit is currently out of the car.

Does the temp sensor supply the coolant temp info to the logger? If so, the temp sensor is fine, because the logger is reporting proper coolant temp.

This is why it isn't working..... you cannot run without the control unit plugged in or the fan won't come on. Plug it back in and test it.

x2xtreme360
09-26-2011, 01:22 PM
The radiator fan? That doesn't make sense.

GTOJOE
09-26-2011, 07:41 PM
I know it doesn't but that's what I read. My display unit was faulty and I did hours and hours of readign to work out what was required etc. I remember reading someone saying not to drive the car then the unit is out as the fans won't come on. It makes sense that the AC fan wouldn't work as it's all linked into the AC operations. Somehow the other must be as well.

GTOJOE
09-29-2011, 08:32 PM
did it work?

x2xtreme360
09-29-2011, 10:40 PM
Not sure yet. The AC unit is still out of the car:p