PDA

View Full Version : how strong are 5 speed TC's?



Sin'sVr4
09-20-2011, 02:12 AM
Ok most of you know what power im putting down. i just put in a new OS and RPS stage 6 clutch. My TC is braced with an e2k brace and not sure how much that will help. I have done probably 5, 2 step launches and it has held up fine. That was on my old clutch but havent finished my break in on this RPS one. I have my 2step set up to were im building up to 15psi of boost prelaunch. my Bell housing was rewelded and has some serious thick welds hopefully strengthening the bell housing significantly. Seems pretty stout so far and when it launched with my old XTD stage How much torque can these take and can they hold up to 2step launches?

I just watched rays safc 2step launches on his stock vr4 and was wondering if his TC or tranny was braced at all? His is a 6 speed too tho right? I just was wonderin if anyone knew if it should hold up. oh and hear are asome pics of my tranny rebuild we did last sunday...allllll day long.....http://i62.photobucket.com/albums/h116/mikepeterson/photobucket-14337-1316495288466.jpghttp://i62.photobucket.com/albums/h116/mikepeterson/photobucket-22406-1316495428163.jpghttp://i62.photobucket.com/albums/h116/mikepeterson/photobucket-10403-1316495466898.jpghttp://i62.photobucket.com/albums/h116/mikepeterson/photobucket-10933-1316495507924.jpg

And my clutch, a ton of hard launches and just couldnt hold the trq that my car had. XTD stage 4. about 4000 miles
http://i62.photobucket.com/albums/h116/mikepeterson/photobucket-17043-1316495335518.jpg

oh huge thx the jer , ryan and ivan.

Sin'sVr4
09-20-2011, 02:16 AM
i still havent done any launches since i still have roughly 350 miles to break in the clutch. Havent driven her since wed. waiting for the TC seasl to redo them to fix the leak. Oh, and Jfast completely went thru my tranny and i had a broken 2nd gear blocker ring and my synchros were shit. So fixed that and she shifts amazing and its so nice to be able to shift again. Thats why i couldnt run good at the track and kept missing shifts. J thx so much you the man.

AdamVR4
09-20-2011, 11:45 AM
had a broken 2nd gear blocker ring

Something like this?

http://img.photobucket.com/albums/v321/adamvr4/synchro.jpg

Been there a couple times...

Sin'sVr4
09-20-2011, 11:46 AM
lol yup exactly. is that mine? haah

AdamVR4
09-20-2011, 11:47 AM
Oh, and to answer your question, I never broke a 5 speed t-case until I welded the center diff. Then I took out 2 main housings and a mid housing.

That said, I used this brace to keep the t-case from potentially taking out my bell housing:

http://img.photobucket.com/albums/v321/adamvr4/IM000194.jpg

It required milling the thickness of the brace off the surface of the t-case, but the peace of mind was worth it.

green-lantern
09-20-2011, 12:10 PM
Did you make that Adam?

Broomfield Racing
09-20-2011, 12:30 PM
Yea 5 speed cases can break easily. Cool brace Adam.

Sin'sVr4
09-20-2011, 12:37 PM
dave what wheels and spacer sizes you using?

Chris@Rvengeperformance
09-20-2011, 12:43 PM
for the money you got in that thing now you may as well get a billet case from dave. should be almost bulletproof with decent driving technique after that.

Broomfield Racing
09-20-2011, 12:58 PM
dave what wheels and spacer sizes you using?

MB comp 16x8 no spacers. Stolen from Adam.

AdamVR4
09-20-2011, 05:33 PM
Did you make that Adam?

I got the portion of the brace that goes between the t-case and bell housing from maddog in ~2004. My Dad and I added the wrap around section. Last I knew, CANENAC had the brace.

Not really sure why you would mess around with braces today when you've got such affordable t-case options from Broomfield.