View Full Version : STM Stealth Is Underway For The 2012 Season
Austin@STM
09-18-2011, 10:34 PM
I know its been a while since i posted on here, just wanted to give everyone an update to let you know things are still happening.
After spending the summer thinking about what to do and working on a ton of customer cars i have a general idea whats gonna happen. The car been sitting in the lot all year, but the last week i finally pulled it in and got to stripping it down.
Im not 100% on what all the parts will be yet, but i know the goal is to be FAST!
So first things first strip it down and remove everything not needed. This is going to be a track only car hoping it weighs in around 2200 with fluids and cage all in if not lighter. Going to run lexan all the way around, gonna run on alcohol so no radiator no front mount. Gonna strip the wiring down to just a engine harness, no lights, guages, heat, wipers ect like last year.
So here it is its beginning stages of race car status, will get some better pics soon.
Enjoy!
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/307133_2386621593235_1481643354_32774984_124582873 7_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/300926_2386619913193_1481643354_32774982_240489576 _n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/298024_2386617793140_1481643354_32774980_150388517 0_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/299461_2386615953094_1481643354_32774978_809074578 _n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/317326_2386614953069_1481643354_32774977_160378392 5_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/298606_2386613993045_1481643354_32774976_100727083 5_n.jpg
futurevr4man
09-18-2011, 10:40 PM
1st post in a soon to be awesome thread! cant wait to see what this thing does!
Beef6
09-18-2011, 10:45 PM
I was just talking about your car an hour ago wondering if there was anything new. Cant wait to see the outcome, good luck!
TwIzTeD_3kGt
09-18-2011, 10:53 PM
From the sound of it, you're planning to make it faster than the RICER EVO. You going for fastest 3/S ever? (not streetable 3/S, obviously) Glad to see you back at it.
JasonY
09-18-2011, 10:54 PM
What turbo setup?
Jason
subscribed. please tell me you're stroking it.
Austin@STM
09-18-2011, 11:52 PM
Also a big thanks to Clutch Masters for their support again. After putting about 12k miles on the stage 6 twin disk last year, i wanted to have them check it over. Turns out the clutch was still in great shape even after all those hard launches on the slicks. After a bit of talking with them we decided to go with a rebuild to a stage 7 with 2 lightweight solid disks to hold a bit more power/torque and put less strain on the tranny during shifting and make sure it was ready to handle whats gonna be thrown at it this year. All i can say is this is one of the best clutch kits around, and they are great people to deal with.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/189235_2250034458642_1481643354_32610535_3917918_n .jpg
mb3000
09-18-2011, 11:57 PM
Subscribed! Lets break some records :bigthumb:
JasonY
09-19-2011, 12:03 AM
Lets not make this a nascar like thread, talk about the car and what you're doing, not the parts of sponsors...lol
:)
Jason
Austin@STM
09-19-2011, 12:09 AM
Lets not make this a nascar like thread, talk about the car and what you're doing, not the parts of sponsors...lol
:)
Jason
I know what you mean, but thats just part of what sponsors want.
As far as turbo setup, still not 100% what it will end up with yet.
Rebel
09-19-2011, 12:21 AM
OOooweee...
jerggy13
09-19-2011, 02:20 AM
Keep It UP!
familyMAN
09-19-2011, 02:43 AM
Should be a beast. Why going full race car instead of streetable?
mb3000
09-19-2011, 02:47 AM
Should be a beast. Why going full race car instead of streetable?
He's trying to avoid the trademark infringement lawsuit that Nelson would hit him with. :awesome:
BigTyla
09-19-2011, 11:42 AM
Such a beautiful car to be made into a race car, though!
Looking forward to watching this build come along.
CoreyB
09-19-2011, 12:21 PM
Will be following this thread, going to be a beast for sure.
Keyan
09-19-2011, 12:39 PM
So why exactly does a motor running on alcohol not need a radiator?
i3igpete
09-19-2011, 01:09 PM
I'm guessing maybe he's going to cement the cooling passages?
FeaRpb
09-19-2011, 01:12 PM
This is bananas
Austin@STM
09-19-2011, 02:10 PM
Alcohol burns very cold, thus keeping the engine temps down. Also being a race car it will never be running for very long. Same thing E-85 does but much more so.
Also i know it sucks this is a beautiful shell, but thats the inly way i would bother building a racecar. Possibly going 170+ i dont want to worry about rusty parts falling off and crashing. This car is absolutely spotless, and very straight so i trust it going those speeds.
HilbillyHomeboy
09-19-2011, 02:41 PM
Awesome. Give 'er hell, Austin!! :cool:
Jeremy
Sin'sVr4
09-20-2011, 02:00 AM
sick bro. Austin ive always loved your car and I hope you break Matts record! Seriously break that shit!!
J-Groove
09-20-2011, 10:05 AM
Very cool!
Looking forward to watching the progress. :)
-John
green-lantern
09-20-2011, 12:24 PM
Also i know it sucks this is a beautiful shell, but thats the inly way i would bother building a racecar. Possibly going 170+ i dont want to worry about rusty parts falling off and crashing. This car is absolutely spotless, and very straight so i trust it going those speeds.
170+ huh
You're a nut my friend :D Give it hell, we need a new record. :)
Good luck man, look forward to following your thread and seeing what it will do.
Austin@STM
09-20-2011, 01:09 PM
170+ huh
You're a nut my friend :D Give it hell, we need a new record. :)
Good luck man, look forward to following your thread and seeing what it will do.
Well 1 step at a time obviously, still gotta go 9's but thats the end goal. 8's and 170+ :)
Zaroth
09-20-2011, 02:01 PM
Well 1 step at a time obviously, still gotta go 9's but thats the end goal. 8's and 170+ :)
The gauntlet has been thrown.
green-lantern
09-20-2011, 02:29 PM
Well 1 step at a time obviously, still gotta go 9's but thats the end goal. 8's and 170+ :)
Awesome! Now get to work go! go! go!
mb7050
09-20-2011, 02:52 PM
sweeeeeeeeeet
Austin@STM
09-20-2011, 11:25 PM
Shawna grabbed in a few photos while i was drilling away today...
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/305172_2237983642345_1630643829_2219337_2082162686 _n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296232_2237976162158_1630643829_2219336_638595945_ n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/303131_2237971442040_1630643829_2219335_429569285_ n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/291959_2237968441965_1630643829_2219332_1336460289 _n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/298995_2237963041830_1630643829_2219318_2136614881 _n.jpg
...and yes i am taking the roof off to ;)
Amphiron
09-20-2011, 11:52 PM
I watched your last thread and you got it close to put back together and we never got any times out of it. =[
Hopefully you finish this one!
Austin@STM
09-20-2011, 11:55 PM
I watched your last thread and you got it close to put back together and we never got any times out of it. =[
Hopefully you finish this one!
What thread is that?
The car was put together on stock turbos and went 10's last season since then its just been sitting apart pretty much, i had the front end assembled somewhat, but it was never anywhere near complete this year.
motomaniac06
09-21-2011, 12:11 AM
are you swiss cheesing this car
bluzvr4
09-21-2011, 12:41 AM
in for times!
AdamVR4
09-21-2011, 12:09 PM
What thread is that?
IIRC, it was the thread where you made the bar that goes across the front of the car. Looks like you used it for the front motor mount.
This thread: http://www.3sgto.org/f2/2011-stm-stealth-build-has-begun-carnage-inside-2731.html
Austin@STM
09-21-2011, 12:35 PM
Ya i thought it might have been that, I got some things mocked up, but never anywhere near a complete setup so i wasnt sure.
So got here early this morning to finish pulling the roof. So far the only rust on the car has been between a few seems "sealed" by mitsubishi 20 years ago, not be though, overall im still amazed at how clean everything is in this car the more i dig.
The old roof/glass/and crank weighed in at 35 pounds, will weigh the new roof and post pics when it gets here later today.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/307679_2401236158590_1481643354_32787553_158333281 5_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/297883_2401233838532_1481643354_32787551_110213562 1_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/317807_2401226238342_1481643354_32787550_108470108 _n.jpg
FeaRpb
09-21-2011, 12:46 PM
How hard was it going about removing the roof?
Greg E
09-21-2011, 01:36 PM
What's the new roof made from?
i3igpete
09-21-2011, 01:55 PM
how much does the inner roof by itself weigh? Is the remaining outer part the structural part?
green-lantern
09-21-2011, 02:08 PM
I bet after all that weight reduction it makes you sick to put a roll cage in it.
HilbillyHomeboy
09-21-2011, 02:11 PM
A good moly cage shouldn't hurt him *too* bad. But yeah, putting weight back in sucks for sure.
Jeremy
green-lantern
09-21-2011, 02:26 PM
I know how he is, he’ll spend an hour or two freeing up 5lbs on the car. Putting weight back in just has to bug the guy. :lo5l:
ahkenaden
09-21-2011, 02:43 PM
I'd be curious to know how much that bare frame by itself weighs...
Austin@STM
09-21-2011, 10:43 PM
Well my phone broke today so no new pictures to share.
The new roof arrived today, so i set it on top to see what all needed to stay. I was able to cut a few more pieces out of the roof frame.
In the end the new roof weighs 13 pounds, and i pulled out a total of 43 from just the roof, so a full 30 pounds in saving today makes me very happy considering there isnt much left to save thats that big at this point.
The new roof wont be attached for some time still though as i will wait until the cage is to install it. Without the roof it will be 100x easier to weld up the cage and get it to fit a lot better. As well as painting the cage/interior.
If you were wondering ow bad t is to remove, its not all that terrible, just very time consuming. All the windows have to be removed, as well as a lot of the interior ( if you have one :P ) and there is a TON of spot welds holding it in.
anyonebutme
09-22-2011, 12:11 PM
My cage builder told me to hold off on replacing the roof until the cage was complete, as to get the A pillar bars as far away from my helmet as possible required cutting the A pillar and roof inner structure. With the roof in place he said it was easier to keep the car perfectly straight, then I don't have to worry about the chassis creeping while replacing the whole roof structure. I'm a big guy, though, so it's always more work to get me in a caged car.
92pearltt
09-22-2011, 05:39 PM
Thats pretty neat that you are going to be running methanol. So I take it you are going to be build a high compression motor then also?
niterydr
09-22-2011, 06:26 PM
If you haven't done it yet, drop the front subframe pieces and fabricate new ones, I dropped a significant amount of weight on my chassis when I did that alone.
green-lantern
09-22-2011, 07:52 PM
If you haven't done it yet, drop the front subframe pieces and fabricate new ones, I dropped a significant amount of weight on my chassis when I did that alone.
You're talking about the bolt on braces right? A friend was going to have some fabricated a while back but it never happened for some reason. You got any pics?
Austin@STM
09-22-2011, 08:44 PM
You're talking about the bolt on braces right? A friend was going to have some fabricated a while back but it never happened for some reason. You got any pics?
If hes talking about the bolt in ones, those are one of the first things i removed years ago when i got the car. Dont forget the whole front end is cut off the car.
FeaRpb
09-22-2011, 08:56 PM
Did you replace them with lighter weight ones?
Austin@STM
09-22-2011, 09:28 PM
So here it is almost all trimmed up, with pretty much the minimum needed to put the new roof in. It requires a lot less support than the old one.
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/310210_2406885939831_1481643354_32792177_151004559 7_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/319584_2406887259864_1481643354_32792178_150917686 _n.jpg
and here it is with the new roof resting in place
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319023_2406888419893_1481643354_32792180_206095215 0_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319023_2406888419893_1481643354_32792180_206095215 0_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/305041_2406889739926_1481643354_32792181_102561482 3_n.jpg
Hans@GZP
09-22-2011, 10:46 PM
Ah, so that's why you were commenting on my FB about the car we reskinned the roof on LOL
Hard AttacK
09-25-2011, 08:23 PM
Is that a factory non sunroof roof?
lawdogg
09-25-2011, 08:56 PM
No cross-bracing on the chassis before cutting the roof out? Are you not at all worried about the body being a little tweaked as you put the cage in? Since we're all aware of how much extra beef ASC had to toss into the Spyder, I wonder how flexible the chassis really is without the roof in there. I suppose it may all come out in the wash once it's buttoned up ... just wondering out loud, as I stroke my chin.
SUPER psyched to see what you build over the winter.
vr4tune
09-26-2011, 02:54 AM
No cross-bracing on the chassis before cutting the roof out? Are you not at all worried about the body being a little tweaked as you put the cage in? Since we're all aware of how much extra beef ASC had to toss into the Spyder, I wonder how flexible the chassis really is without the roof in there. I suppose it may all come out in the wash once it's buttoned up ... just wondering out loud, as I stroke my chin.
SUPER psyched to see what you build over the winter.
I understand what you are saying and you make a valid point, but I would guess that because the majority of the roof structure wasn't removed, that it retained most of it's rigidity.
even with the roof cut out, the flex isn't that bad. it's been measured by someone who did a targa conversion; and compared to other targa/convertibles. the frame is aceptably stiff with the top completely removed. if he's not beating on it with the top off, i don't think he'll have any issues re-installing the roof.
...and he hasn't even removed the whole roof.
OBXBoost
09-26-2011, 02:59 PM
The old roof/glass/and crank weighed in at 35 pounds, will weigh the new roof and post pics when it gets here later today.
Selling the crank assembly? I'm interested :)
Austin@STM
09-26-2011, 04:14 PM
Selling the crank assembly? I'm interested :)
It sure is, anything i take off the car is for sale, im gonna have quite a bill with all i want to do to this thing, so every bit helps. Make me an offer on it, i have the crank assembly with the handle for sure, but im pretty sure i still have the trim pieces at home in my basement as well.
As far as worrying about the car flexing, i am not at all worried, the car is supported by the frame right now not the suspension, plus there is nothing at all in it so there isnt much force on it right now. I will be sure to take my time though when installing it reinstall all the trim and windows to make sure everything lines up properly before final installation.
OBXBoost
09-26-2011, 04:57 PM
It sure is, anything i take off the car is for sale, im gonna have quite a bill with all i want to do to this thing, so every bit helps. Make me an offer on it, i have the crank assembly with the handle for sure, but im pretty sure i still have the trim pieces at home in my basement as well.
As far as worrying about the car flexing, i am not at all worried, the car is supported by the frame right now not the suspension, plus there is nothing at all in it so there isnt much force on it right now. I will be sure to take my time though when installing it reinstall all the trim and windows to make sure everything lines up properly before final installation.
PM'ed :)
green-lantern
09-26-2011, 08:09 PM
No cross-bracing on the chassis before cutting the roof out? Are you not at all worried about the body being a little tweaked as you put the cage in? Since we're all aware of how much extra beef ASC had to toss into the Spyder, I wonder how flexible the chassis really is without the roof in there. I suppose it may all come out in the wash once it's buttoned up ... just wondering out loud, as I stroke my chin.
SUPER psyched to see what you build over the winter.
Boy it does look a bit flimsy without the rest. Don't think I'd worry to much though.
mehrshadvr4
09-26-2011, 11:05 PM
hey this is great, but is there any other reason behind using alcohol beside making the car lighter and more aero dynamic ? Matt made almost 1100whp on race gas and his car was about 3000lbs and he trapped almost 170mph with no traction at all. you will need a 4 bolt block also though since the 2 bolt block is good for sub 800whp.
i3igpete
09-26-2011, 11:36 PM
i am totally confused with your line of thought
hey this is great, but is there any other reason behind using alcohol beside making the car lighter and more aero dynamic ? Matt made almost 1100whp on race gas and his car was about 3000lbs and he trapped almost 170mph with no traction at all. you will need a 4 bolt block also though since the 2 bolt block is good for sub 800whp.
um, wtf does running on ethanol have to do with aerodynamics?
92pearltt
09-27-2011, 12:00 AM
hey this is great, but is there any other reason behind using alcohol beside making the car lighter and more aero dynamic ? Matt made almost 1100whp on race gas and his car was about 3000lbs and he trapped almost 170mph with no traction at all. you will need a 4 bolt block also though since the 2 bolt block is good for sub 800whp.
haha I am pretty sure he knows pretty much everything he needs to know to do this build, he has proven that many times over.
J. Fast
09-27-2011, 12:08 AM
Haha, I started spot weld cutting the crap out of some interior panels today. Holy crap Austin, It took about an hour for 20 drills or so just to pull each speaker mount and the two tabs! Started working on the rear panels and main rear upper strut crossmember too. You think you can cut some of those gussets out on the inner and outer fender wells? I was thinking about looking there next and at the B-pillar and on the roof to B pillar. Looks likes there's 3 layers there. I bet those corner pieces weigh 15lbs each and you could cut them out and reinforce them back with the cage.
Damn, you went to town and put some time in with the cutter, that shit is friggin time consuming!
anyonebutme
09-27-2011, 12:51 AM
It must be because I understand foreign-speak, but I got what he was going after.
Translation: He was talking about how not having a radiator decreases drag and reduces weight as a bonus to alcohol conversion. He missed that the primary reason for the conversion is for power not the bonuses. I have no translation for the second part...
as for spotweld cutting.....it didn't take long before I got frusterated and picked up the sawzall, lol.
mehrshadvr4
09-27-2011, 01:35 AM
um, wtf does running on ethanol have to do with aerodynamics?
it looks like his goals are 170mph which can be achive on race gas a lone.as he said running ethanol will illuminate the needs of using radiator and ic so he can close the front of the car for better aero dynamic not to mention it net you lighter car as well.
http://image.automotive.com/f/events/10981602+soriginal/turp_0809_12_z+2008_battle_of_the_imports+honda+ci vic_eg_hatchback_drag_car.jpg
http://t1.gstatic.com/images?q=tbn:ANd9GcRzgL078i7jxZ7LJ1PzMENoha1f5UUMG RAURiwi4WQK9dRoLKoy1V5PE0Zu
haha I am pretty sure he knows pretty much everything he needs to know to do this build, he has proven that many times over.
i will be very surprised if he traps 170+MPH with only 800whp. Chris Hill already proved the 2 bolt block is only good for ~ 800whp before stretching those APR mail bolts.but again he surprised a lot of people with what he did with stock turbos.
it looks like his goals are 170mph which can be achive on race gas a lone.as he said running ethanol will illuminate the needs of using radiator and ic so he can close the front of the car for better aero dynamic not to mention it net you lighter car as well.
http://image.automotive.com/f/events/10981602+soriginal/turp_0809_12_z+2008_battle_of_the_imports+honda+ci vic_eg_hatchback_drag_car.jpg
http://t1.gstatic.com/images?q=tbn:ANd9GcRzgL078i7jxZ7LJ1PzMENoha1f5UUMG RAURiwi4WQK9dRoLKoy1V5PE0Zu
i will be very surprised if he traps 170+MPH with only 800whp. Chris Hill already proved the 2 bolt block is only good for ~ 800whp before stretching those APR mail bolts.but again he surprised a lot of people from what he did with stock turbos.
i'm hoping you mean ELIMINATE the needs of cooling.
ethanol burns significant cooler & has excellent burn properties, which makes using it as a fuel source a great choice for any power-hungry tuner; regardless of aerodynamic designs.
besides, austin already has a 1g stealth, which is widely acknowledged to have the most aerodynamic shape of all 3/s's; so it's perfect for drags.
Permanent grin
09-27-2011, 03:54 AM
1g stealth, which is widely acknowledged to have the most aerodynamic shape of all 3/s's
I'd never really thought about that at all! Maybe because we have virtually no Stealth's over here.
André
Austin@STM
09-27-2011, 11:11 AM
Yes you are correct, it will help with aerodynamics a little bit as well. The entire front end will be sealed off, but i will try and make it look nicer then that last car for sure.
I have no doubt we can get the same power on a different fuel, we made 846whp on our shop evo on e85 with a single 6766, and thats on a mustang dyno. Thats not the reason for the different fuel choice though, its more than the power that can be made, its all the other benefits that have been listed. No radiator, no intercooler, no piping really, just a little 2 gallon cell up front and a weldon pump. Thus making the car a lot lighter as well as a lot simpler which is how i like it.
I can get into it more later, but i gotta get back to work right now.
-Austin
i3igpete
09-27-2011, 12:53 PM
but how will you be able to drive it to the mcdonalds drive thru without a radiator???
Turbo Beast
09-27-2011, 04:41 PM
but how will you be able to drive it to the mcdonalds drive thru without a radiator???
Exactly! How will you survive Austin? Everything seems drive-thru in America?
I could send you some food, but just remember not to stand in front of your mailbox for too long!
LMK, us Europeans love to help.
mehrshadvr4
09-27-2011, 04:59 PM
he already said it'll be a drag race car and it'll be shut off after each run.
anyonebutme
09-27-2011, 08:27 PM
he already said it'll be a drag race car and it'll be shut off after each run.
mershad.....nevermind, I give up.
well this is probably the first "no compromises" drag build of a 3/s EVER.
TwIzTeD_3kGt
09-27-2011, 09:15 PM
well this is probably the first "no compromises" drag build of a 3/s EVER.
Yes it is.
Turbo Beast
09-27-2011, 10:37 PM
he already said it'll be a drag race car and it'll be shut off after each run.
Huh, i never got that anywhere?
Hard AttacK
09-27-2011, 11:35 PM
subscribed to the fuck nelson thread
CoopKill
09-27-2011, 11:53 PM
^^ on a budget ^^
lol
Austin@STM
09-28-2011, 12:32 AM
For those of you that dont get the food jokes, this is where they come from
http://www.3sgto.org/f8/food-lots-food-enter-if-you-like-food-3275.html
mehrshadvr4
09-28-2011, 01:20 AM
damn now i get it lol.
OBXBoost
09-28-2011, 07:58 AM
Get my PM? :)
neverenoughhp
10-06-2011, 08:53 PM
Why does he keep making comments about 2 bolt blocks? You have a 4 bolt right?
OBXBoost
10-12-2011, 11:29 AM
Get my PM? :)
? :) :)
Austin@STM
10-13-2011, 02:22 PM
Not a huge update but its something, i spent a little time putting it back into the shape of a car again, just gotta order some slicks now and it will look really good sitting there :)
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/294387_2464712705464_1481643354_32838875_189357768 5_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/320501_2464716145550_1481643354_32838880_372122566 _n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299525_2464717305579_1481643354_32838881_224412198 _n.jpg
deleting the sails this year?
AdamVR4
10-13-2011, 03:13 PM
What happened to the old slicks?
SxFxZ
10-29-2011, 01:57 AM
Austin you can buy my slicks. You know they're brand new. lol
Austin@STM
10-29-2011, 09:55 AM
deleting the sails this year?
I wont delete them, i still want it to look good, if i can get a set of base model stealth sails i will run those instead. Otherwise all stock tt sails.
What happened to the old slicks?
The old slicks are here, i was just borrowing them from a friend.
Austin you can buy my slicks. You know they're brand new. lol
Yours are the wrong size for me, I need 15's.
Ninja Performance
10-29-2011, 01:38 PM
Very excited in this project. Gonna be nutz.
-Chris
futurevr4man
10-29-2011, 02:46 PM
slow car is slow ;)
lets see moar pix!!
TT Eric
10-29-2011, 02:54 PM
170MPH and 2200lbs require a bit less then 850WHP to be done!
Eric
Austin@STM
10-29-2011, 03:11 PM
I will have some interesting pics later, but for now i'll just give you guys this and see if you can guess whats about to happen ;)
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s320x320/378897_2540395477486_1481643354_32899927_132300824 4_n.jpg
Austin@STM
10-29-2011, 03:12 PM
not sure why its so small, its a little hard to see
Austin@STM
10-29-2011, 06:47 PM
Ok its time for an update. Last time i posted the car was going back together somewhat. Then i decided to fully lose sanity and cut off another 30 pounds of the car :)
I am very happy it ended up weighing what it did, as it will only take about 4-5 pounds of chromoly to replace that section. I will still trim it back a little and clean it up, just wanted to get the big chunks out and get an idea what it was gonna do.
I can also pick the front end off the ground with the "strut bar" so i guess the car is kind of light weight now :P
I bought a few extra parts over the past few weeks, so i've had to push off ordering material for the cage. Now i am ready for it though, and will be doing it as soon as funds allow.
Heres 9 pounds of metal
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/314664_2506711355404_1481643354_32871874_189146015 0_n.jpg
and heres the other 18 of metal
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/312594_2541729630839_1481643354_32901261_207398553 3_n.jpg
and heres what it looks like now
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/301447_2541730550862_1481643354_32901262_23427380_ n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/374723_2541731190878_1481643354_32901263_206932530 5_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/391733_2541732030899_1481643354_32901264_183269304 1_n.jpg
are you going complete tube-frame up front? what about the fenders? are you going to make a "unibody" hood like on vipers/vettes?
mb7050
10-29-2011, 06:53 PM
Damn man thats nuts !Can't Wait to See More!
thor'svr4
10-29-2011, 07:03 PM
ive wanted to do that for about a year now. even started a thread on a local forum about how to make a chrome molly front end (found out a buddys dad does it for some local drag racers) and a 1 piece hood/fenders/bumper style front. I’m really interested to see how your front end works out and what you decide to do for the body. Keep us updated with pics man. I love the look of a purpose built drag car.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/391733_2541732030899_1481643354_32901264_183269304 1_n.jpg
thats the best idea ive ever seen for weight reduction with the doors yet still keeping a stockish look from the outside. very creative!!!!
Laughfer
11-01-2011, 03:06 PM
looking crazy i hope you break some records...
Ninja Performance
11-02-2011, 08:58 AM
you are crazy...I love it!
-Chris
DocWalt
11-02-2011, 12:01 PM
Awesome... I cant wait to see what's next :p
92RT-TT
11-02-2011, 12:37 PM
That is pretty awesome! Just imagine what you could do with some 850 hp turbos... ;)
mehrshadvr4
12-25-2011, 06:26 PM
Bump for an update.
green-lantern
12-25-2011, 07:54 PM
Bump for an update.
:stupid:
I was just wondering about this.
CoopKill
12-25-2011, 11:36 PM
:stupid:
:stupid:
This!
Blackmount
12-26-2011, 12:46 AM
Subscribed. Always down for a good race car build thread with lots of pics of shiney go fast type shananagin type things
Rakuny
01-30-2012, 08:48 AM
:bump:
updates please!
R/T93
01-30-2012, 12:29 PM
Isn't it sold and he bought a dsm?
Edit:Possible bullshit spewing from my mouth, btw.
BigTyla
01-30-2012, 02:43 PM
Isn't it sold and he bought a dsm?
That'd be news to me.
CoopKill
01-30-2012, 06:39 PM
he got a dsm back that he sold to someone, which they are build into a track car as well...
I think...
Laughfer
01-31-2012, 04:39 PM
gay....lets do somthing thats been done a thousand times..strip a dsm and make it a track car....i really had high hopes for this car to break some records...
Blackmount
01-31-2012, 09:09 PM
Mee too... Im tired of dsms
MeTarzan
01-31-2012, 11:12 PM
Anything else happening with this car??
Bluejediz
03-22-2012, 04:49 PM
Still no updates?
dannyperedes1
05-23-2012, 12:37 PM
that would be a huge disappointment to not see this project come to fruition. hopeful bump
Blackmount
05-23-2012, 12:41 PM
Dead Stm stealth is dead.
FeaRpb
05-23-2012, 12:44 PM
I heard he sold it.
i want to fucking kick people in the nuts for shit like this.
Ninja Performance
05-23-2012, 12:50 PM
i want to fucking kick people in the nuts for shit like this.
Then build one yourself ?
-Chris
FeaRpb
05-23-2012, 12:51 PM
Go get yourself some balls, and try it yourself. When you fail, we will all kick you in the balls.
i don't care if the records ever get broken. i get sick of hype threads. nelson was bad enough.
BigTyla
05-23-2012, 01:56 PM
He probably realized just how much cheaper it is to get huge numbers on a DSM. I hate it, but it's true.
Regardless, this would have been an impressive build for this platform. You just have to have a lot more money to do it right on the 3S, especially with the waning aftermarket. :(
He probably realized just how much cheaper it is to get huge numbers on a DSM. I hate it, but it's true.
Regardless, this would have been an impressive build for this platform. You just have to have a lot more money to do it right on the 3S, especially with the waning aftermarket. :(
can't be that hard to strip a car naked & slap some 16g's in it.
DocWalt
05-23-2012, 02:08 PM
Supposedly they found rust and didn't want to risk being unsafe. Key word is supposedly.
fullracegt
05-23-2012, 02:13 PM
i don't care if the records ever get broken. i get sick of hype threads. nelson was bad enough.
nelson isn't trying to break records. If he was he would stop running "low boost and letting off" all the time LOL
HilbillyHomeboy
05-23-2012, 02:22 PM
Sucks it didn't get finished, but shit happens. People sell for whatever reason. Life goes on... :)
Jeremy
Chris@Rvengeperformance
05-23-2012, 07:03 PM
Supposedly they found rust and didn't want to risk being unsafe. Key word is supposedly.
Lol so they are willing to re-engineer the whole front clip, strip out half the metal in the floor and roof, but God help us its unsafe to fix some rust.
Ha
Most of the time you see this is when builds get too ambitious.
J. Fast
05-23-2012, 07:15 PM
I will carry the torch... soon :)
bluzvr4
05-23-2012, 08:06 PM
hope its not true this has always been one of my fav 3s. and the dsm thing is true. iv allready decided i will make my talon the fast car and the vr4 my pretty and quick car
green-lantern
05-23-2012, 08:15 PM
I will carry the torch... soon :)
So the platform is truly dead :(
;) :lol: jk
keo92stealth
05-23-2012, 09:12 PM
He probably realized just how much cheaper it is to get huge numbers on a DSM. I hate it, but it's true.
Regardless, this would have been an impressive build for this platform. You just have to have a lot more money to do it right on the 3S, especially with the waning aftermarket. :(
true. a dsm with 20k would run 9s for sure and so would a civic lol. sad but so true. but when it comes to parts, the 3s platform has it good compared to like a supra of skyline gtr. you have to have loads of cash to even buy the car/shell lol.
J. Fast
05-23-2012, 09:17 PM
Haha, on the celly and kept scrolling down and was like... wtf? Good one!
I will not fail tho. 3.7 11:1 E-85 stroker with BFT's dropping into a 1400lb race ready chassi. Will be epic, promise!
keo92stealth
05-23-2012, 09:30 PM
Haha, on the celly and kept scrolling down and was like... wtf? Good one!
I will not fail tho. 3.7 11:1 E-85 stroker with BFT's dropping into a 1400lb race ready chassi. Will be epic, promise!
about damn time you reveal what ur plans was for that thing.
i3igpete
05-23-2012, 09:38 PM
Lol so they are willing to re-engineer the whole front clip, strip out half the metal in the floor and roof, but God help us its unsafe to fix some rust.
i was gonna say... if they can fab a tube front end and a rollcage, i'm pretty sure they can fix any frame rust.
DocWalt
05-23-2012, 09:40 PM
I think it was an excuse ;)
BigTyla
05-23-2012, 09:58 PM
I think it was an excuse ;)
Definitely, but who needs one like that? I mean really. Any reasonable person can understand the move to the DSM platform. They may be butt ugly compared to a 3S but you can't argue with the numbers.
Ninja Performance
05-24-2012, 12:26 AM
Definitely, but who needs one like that? I mean really. Any reasonable person can understand the move to the DSM platform. They may be butt ugly compared to a 3S but you can't argue with the numbers.
same can be said of the fox body.
-Chis
MUCH harder to set a world record for DSM though....the trails have already been blazed. if he'd kept going, he could have quite easily set some new 3/s records.
fullracegt
05-24-2012, 02:17 AM
hopefully he sees this thread and gets pissed off and starts work on the car again,he does have a lot of fabrication ahead of him though.
J. Fast
05-24-2012, 09:02 AM
There's nothing to work on. He parted all of it out. Unless he's going to put an English Racing Auto trans in it, a brand new motor, suspension, and body... it's gone. Body panels, engine, drivetrain, suspension, and etc... all have been sold. I've seen him lurk on this thread. Not one comment about the car kinda answers the questions... I guarantee he's building somthing fast just not his old 3S anymore.
There's nothing to work on. He parted all of it out. Unless he's going to put an English Racing Auto trans in it, a brand new motor, suspension, and body... it's gone. Body panels, engine, drivetrain, suspension, and etc... all have been sold. I've seen him lurk on this thread. Not one comment about the car kinda answers the questions... I guarantee he's building somthing fast just not his old 3S anymore.
hellbringer 2.0
Ninja Performance
05-24-2012, 09:58 AM
i don't care if the records ever get broken. i get sick of hype threads. nelson was bad enough.
MUCH harder to set a world record for DSM though....the trails have already been blazed. if he'd kept going, he could have quite easily set some new 3/s records.
but you don't care, or you do, or....so what is it?
-Chris
but you don't care, or you do, or....so what is it?
-Chris
i don't care if the 3/s records get broken. if they do, and this platform improves--great! if not, i'm not going to lose sleep over it.
for austin's benefit, if he wanted a car that would set some records, leaving this platform doesn't make a lick of sense. if he just wants to go fast for cheap, DSM makes much more sense--but trying to gain some accolades for record-breaking aren't going to be easy. for that matter, as mentioned earlier, a fox-body stang would be the most bang for the buck--but you'd never have a prayer of setting a record without some serious coin and a crapload of work.
BigTyla
05-24-2012, 12:39 PM
i don't care if the 3/s records get broken. if they do, and this platform improves--great! if not, i'm not going to lose sleep over it.
for austin's benefit, if he wanted a car that would set some records, leaving this platform doesn't make a lick of sense. if he just wants to go fast for cheap, DSM makes much more sense--but trying to gain some accolades for record-breaking aren't going to be easy. for that matter, as mentioned earlier, a fox-body stang would be the most bang for the buck--but you'd never have a prayer of setting a record without some serious coin and a crapload of work.
If you're racing only to set platform records you're racing for all the wrong reasons.
HellBringer
05-24-2012, 12:48 PM
IPD -- Your evident infatuation with me as indicated by your incessant need to continually make reference to/about me in threads, in chat, etc… is pretty sad. Disturbing and somewhat sadly comical, but primarily just sad. I hope in the twisted self-imposed construct you live in that you’re liked and respected, or at a minimum tolerated, because you certainly aren’t in the real world. Back here grounded in reality you’re seen as a joke, and the site you’ve been banned from is markedly improved by your absence.
No need to respond, just please do your best to keep me out of your thoughts going forward. If you’re not able to manage that, then I advise you seek the professional help your desperate cries for attention indicate you require.
abram hasn't changed a damn bit...i'll give him credit for that.
Gearheadvr4
05-24-2012, 08:18 PM
I clicked thinking there was an update on the build and I get this nonsense?!?
I want my 5 min of lost time back. Weak.
mb7050
05-24-2012, 08:25 PM
:soap: :musik2:
HellBringer
05-24-2012, 08:47 PM
I clicked thinking there was an update on the build and I get this nonsense?!?
I want my 5 min of lost time back. Weak.
So you decided to effectively lose more time by making a post whining about having lost time? :brilliant:
Gearheadvr4
05-24-2012, 09:19 PM
You've got a point. It was supposed to be sarcastic, but I wasn't nearly as good as you apparently. ;) I'm just fed up with this stuff on the forums I frequent. When I go to a car forum I want to actually read about cars and help others with theirs. Shocking! Issues like this should be handled in a PM or an off topic thread. Nothing against you Hellbringer. I've got a lot of respect for you. (IPD, I don't know you....) I guess STM has abandoned this thread anyways after reading back a few pages.
Let the drama games continue. :popcorn:
Hard AttacK
06-05-2012, 01:45 PM
Cool so he pussed out? bitch.
Rakuny
06-05-2012, 09:04 PM
If you're racing only to set platform records you're racing for all the wrong reasons.
Shops set platform records to market themselves and sell parts... worse money has been spent in stupider ways marketing. Look how much attention the STM stealth has gotten.
JasonY
06-05-2012, 09:05 PM
Ask DR or 3sx how they shop cars helped sales.
Oh yeah, they stopped racing them.
Jason
B-Man
06-05-2012, 09:24 PM
3sx and DR have already proved that they can build whatever a customer wants. It's more proof that they shop know what the hell they're doing.
keo92stealth
06-05-2012, 10:27 PM
i bet the 3sx drag car still runs while we all know matts car is all over the place now.
BigTyla
06-05-2012, 11:23 PM
Shops set platform records to market themselves and sell parts... worse money has been spent in stupider ways marketing. Look how much attention the STM stealth has gotten.
My post was in the context of an individual, not to a specialty shop. STM supports many more platforms than the 3S and I'm willing to bet that all of them make more money than the 3S platform.
If I were a shop, sure I'd go for a platform record. Otherwise, a high-8 1/4 time is laughable compared to what the DSM platform is capable of with much less of an investment.
I vote we let this thread die.
green-lantern
06-06-2012, 04:48 PM
Ask DR or 3sx how they shop cars helped sales.
Oh yeah, they stopped racing them.
Jason
They both have successful businesses. Matt and 3sx got a good bit of attention with those cars.
KeithMac
06-06-2012, 05:59 PM
No point Matt racing again until someone beats his record!.
Think Austin went a step too far when he chopped the front suspension mounts out..
Would love to see what he could get out of straight Methanol.
JasonY
06-06-2012, 07:18 PM
They both have successful businesses. Matt and 3sx got a good bit of attention with those cars.
They were financial black holes. Matts car was for Matt to race and to test/prove his own products. 3sx also used their car to test/prove their products. Direct correlation of investment into their cars and turning what their car proved into sales, I highly doubt helped much at all, i think Steve even admitted as such.
Im glad they did it, but were talking 3/S owners...because 3sx went 9's i dont think we all flew to 3sx.com and threw down thousands just because of that. Hell im more interested in whos parts privateers use to accomplish goals. Thats more relevant to what would be successful for a customer to purchase and use himself.
Jason
fullracegt
06-06-2012, 10:42 PM
No point Matt racing again until someone beats his record!.
Think Austin went a step too far when he chopped the front suspension mounts out..
Would love to see what he could get out of straight Methanol.
yea i agree he cut off more than he needed to, he could have saved more weight doing tubular subframe which probably would have helped traction too.
its a shame because that was such a clean car not to be finished.
onebadmollafolla
06-06-2012, 10:45 PM
Cool so he pussed out? bitch.
You must be a hardass.
HellBringer
06-06-2012, 11:18 PM
i bet the 3sx drag car still runs while we all know matts car is all over the place now.
The 3SX car hasn't run (as in started) in years, and depending who you ask, may not run period. Steve's TT Viper took its place in the service showroom a year or so ago and it's been rotting on a storage room in the back of the service shop since. I nudged Steve a few times maybe 2 years ago about getting back into racing and he had zero interest.
keo92stealth
06-06-2012, 11:22 PM
The 3SX car hasn't run (as in started) in years, and depending who you ask, may not run period. Steve's TT Viper took its place in the service showroom a year or so ago and it's been rotting on a storage room in the back of the service shop since. I nudged Steve a few times maybe 2 years ago about getting back into racing and he had zero interest.
dang that sucks. man that sucks that they dont race anymore. oh yea that was a guess about the 3sx car still running. i should have had a little more info on that before i stated that.
Hard AttacK
06-10-2012, 02:08 PM
You must be a hardass.
You must be a bitch too.
Amphiron
06-10-2012, 02:27 PM
"fighting on the internet is like running in the special Olympics, even if you win, you're still retarded."
Zaroth
06-10-2012, 02:33 PM
You must be a bitch too.
http://i49.tinypic.com/aayyd2.jpg
FeaRpb
06-10-2012, 02:44 PM
You must be a bitch too.
Lololololololololololololololololololololololololo lolololololololololololololololololololololol
Post via Tapatalk
fullracegt
06-10-2012, 02:49 PM
im gonna ask austin if he knows what happened to this thread lol
BigTyla
06-10-2012, 03:43 PM
Please, please, PLEASE let this thread die.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.