PDA

View Full Version : STRI DSD setup - Maximal review



x2xtreme360
09-12-2011, 10:53 PM
I would firstly like to thank Terry at Maximal for helping me out with these gauges. He's got amazing customer service and deserves all the business he gets.

Basically, I bought 5 Xline gauges from Terry, and I don't know what was going on with them (because I've never read a bad review about them), but they just weren't working for me. I was having some communication issues with STRI, so I let Terry know (even though I didn't want to involve him since he had already done a lot to get them to me), and he was able to talk them into bumping me up to the DSD series. Obviously, I had to pay the difference... I fully expected that... but I am glad I did.

I'm not going to knock the Xline gauges. I had issues with them. No one else seemed to though, so that's not what this is about. Terry stepped up and got ahold of STRI for me, and got me the gauges I wanted.

Let me just say this: Having owned both sets (original Xline, not the V2), the DSD series is hands down a stunning package. Obviously at double the price, of course they would be:p. I still paid much less for them than some of the other top brands. The gauges look solid right out of the box. The wiring harnesses are grade A quality. The peak and hold function is awesome, and the responsiveness of the gauges are awesome. Even the boost gauge, which is electrical (and I was weary of it), responds great.

The pic really blows, but here's a night shot of them.

http://i89.photobucket.com/albums/k226/X2Xtreme360/0912112114.jpg

So thanks to Terry for helping me out. If you want a great set of gauges at an awesome price, hit him up for some of these. It was under $1K for all 5 of the STRI gauges, and I finally have something accurate to go off of.

TurboSinceBirth
09-12-2011, 11:06 PM
Good gauges definitely aren't cheap. I had looked at some of the STRI line. When I decide what gauge setup I want to go with I'll probably give them a shot. I already have a wideband, water temp, fuel pressure, oil pressure, boost, and oil temperature so I'm not sure what else I want. The water temp/fuel pressure and oil pressure/oil temp are together in two gauges not 4. Maybe I'll just get rid of the triple pillar pod.

x2xtreme360
09-12-2011, 11:16 PM
The best part about using the triple center pod is that I tied everything in with the dash harness wiring. It looks so stock from the inside that you wouldn't even know it was aftermarket. I used the constant B+ feed from the hazard switch, and the three other power, ground, and illum sources came right from the stock center gauge harness.

Maximal
09-13-2011, 10:16 AM
They look awesome! Glad we were finally able to take care of it and I will say Stri from my side was very easy to work with and impressed me. This is the only issues I've had with any gauges of theirs I sold and they really stepped up to the plate.