PDA

View Full Version : Make it official, real world hood tests for the 3/S. Aero, cooling, Tuft wool?



J. Fast
09-11-2011, 02:37 AM
Had some spare time to burn today and figured I'd post up some info on these hoods. I own and have specifically tested 4 different style hoods; OEM, DEFT 575, Aerokit GT 300, and this Custom Modified Scoote 2. I have tuft wool tested all of these hoods and logged coolant temps on my AEM. Another thing to note, I have speed tested all of these to atleast 150mph and also hillclimb tested all of these to see for myself which hood has the most "ideal" design for aero and cooling.

http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_001.jpg

By far the best hood I've ran so far? This is THE one, which I slightly modified. This hood began as a Scoote 2. http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_004.jpg
I shaved the vent pockets and raised the waterfall edges which increased the vent area and pretty much eliminated the pressure area right at the windshield. http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_003.jpg

The hoods design does a great job in evacuating air in the tumble / pressure zone under the hood. It also virtually eliminated the dead zone at the windshield and additionally draws air thru the fmic and radiator. (FYI just finished final fitting and reshaping this so it looks a little rough since it hasnt been painted yet, so don't hate :) ). Long story short, I've cruised it the past two sundays at the midnight meets which are a BIG DEAL... and it's $$$ for sure. I love the design and I love the function.

Observations, there is no dead zone with this hood as illustrated and JPEG'd. 1) All the air works its way from front to rear. 2) There is no rearward movement, dead air, or tumble infront of the winshield. 3) I do not have to raise the rear edge of the hood. 4) The hood is flush with all adjacent panels and functions properly without sacrificaing aero and under hood pressure differentials. 5) I can literally put my hand outside the window or thru the sunroof with the glass removed and feel the heat being pulled out of the engine bay.

Here's a vid. It's a little choppy at first but it smooths out. You can see the tufts placed at the base of the windshield no longer tumble, and all the air moving over the hood is directed toward the roof, nothing is being pulled back into the hood like it were a cowl or being overcome by a pressure differential below the hood. One thing that should be noted, there is a low pressure area right in front of the mirrors about 3/4 back near the edge of the fenders.


http://s788.photobucket.com/albums/yy163/JFastMotorsports/?action=view&current=Video_091011_001.mp4

^^^VID LINK^^^

Real world, As a test of the design I decided to only run one radiator fan while leading this last Labor Day weekend's Nationwide Underground club ride. There were 500 cars attendees and 200+ that we able to complete the killer cruise. I led the cruise from LODO (5000ft) to the Top of 14,000ft Mt. Evans at midnight last Sunday and ran 50 miles or so all out. (Again, like I said, I led this cruise and only ran one radiator fan). I never heated up past 215 degrees. In roughly 45 minutes time our club covered 50miles and climbed nearly 10000ft. I was boosting 22psi on 91 octane pump gas, and my radiator is a KOYO. I give a lot of the credit to this hood, and an AEM, both are friggin bitchin'!

Anyway, here's some pics I took this afternoon and a vid if you want to see how air is moving in real time. If I get some time I'll see if I can dig up my other pics on the other hoods. If anyone else has some info or vids on this topic it would be cool to se your results with tuft wool, possibly smoke, or whatever as well.


150mph
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_005.jpg

80mph
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_006.jpg

75mph
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_007.jpg
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_091011_008.jpg

Love to hear about some other hoods, real world testing, and see some vids too!

IPD
09-11-2011, 02:45 AM
first off, thanks for posting. it's great to have some empirical evidence for once.

second, it would be nice to get a sticky--which would help people find this evidence easier.
















third. IN YOUR F**KING FACE YOU NAYSAYERS WHO SAID MY HOOD SUCKS!!!

p.s.

i TRIED to arrange a group buy on a custom hood which was pretty much IDENTICAL to the mods you described here. larger vents (not skewed like the scoote2), eyelids, the works. never went anywhere. damn shame. i STILL don't think people will listen though. too many people like stealthee hollering about "fugliness" for anyone to actually pay attention to cold, hard results.

J. Fast
09-11-2011, 02:54 AM
LOL, at 150 the wool looks like this ////////////// :)

HilbillyHomeboy
09-11-2011, 10:10 AM
Nice data, much appreciated.

Jeremy

mb3000
09-11-2011, 12:35 PM
Thanks for posting. I would love to see a PRM style hood for guys with pop ups.

familyMAN
09-11-2011, 02:26 PM
I suspected that it would be one of the most functional. Thanks for the work!
I just can't bring myself to buy one for a 1st gen. Looks great on a 2nd gen or 99 but is too rounded for a 1st gen.
I am thinking of putting a ford GT500 hood vent/extractor on my car. I think it will look good and many have reported good results on coolant temps.

MR2
12-28-2011, 12:21 AM
we need video :p and from the side on.

Unknownvr4
12-28-2011, 12:29 AM
Subscribed

MR2
12-28-2011, 02:34 AM
BTW the scoote2 hood fits pretty bad and is way too weak for serious duty. A lot of work to fit it because its way off on the gaps. It also as flexible as bubble gum. it needs serious reinforcement I can bend the vents around 1cm with a light effort from my pinky. On the bright side it looks nice and gives you a lot more exhaust manifold clearance. Which is good for me I was having problems with that.

I gotta take a moment to say thank you to the guys at the body shop. These guys are literally working 12+ hour days every day to make this car happen for the race. I cannot say thank you enough. They are working way harder than they are being paid for. It means a lot to me.


From AMB, I think the Scoote 2 is a good start though.

J. Fast
12-28-2011, 02:49 AM
Who is AMB?

MR2
12-28-2011, 03:19 AM
Andrew M Brilliant

AdamVR4
12-28-2011, 03:23 AM
anyonebutme

MR2
12-28-2011, 03:37 AM
different people :p

zapman2000
12-28-2011, 09:29 AM
Did you start at I225 @ techcenter on ramp? Couldn't help noticing

HTC EVO 4G

NOMIEZVR4
12-28-2011, 12:45 PM
The more I see this hood, the more I like it. How much for one of these and where can they be purchased from?

Unlogic
12-30-2011, 03:08 PM
The more I see this hood, the more I like it. How much for one of these and where can they be purchased from?

Yes who makes them and where can you get one?

I've been planing to order this hood which looks similar:
http://www.c7carbon.com/images/product_pictures/599racing.jpg

IPD
12-30-2011, 04:56 PM
Yes who makes them and where can you get one?

I've been planing to order this hood which looks similar:
http://www.c7carbon.com/images/product_pictures/599racing.jpg

the scoote2 can be ordered from aerokits.net (chaser aerodynamics). afaik, no one has done actual flow testing (or downforce testing, etc) on the 599 hood. while it does probably do a better job of venting than the gt-300/top-secret, i think it's lines are only a marginal improvement (and the 3/s needs more round-ness). additionally, the vents are spread out further from the center of the car, meaning that the turbos are further from the vents than on the scoote2. so not only might this effect cooling efficiency, it could also create more potential issues (water on the battery, etc). of course, if you use a battery cover, you can run hoodless for all that it matters.

p.s.

while fitment looks great in that pic, keep in mind that all of that is 100% aftermarket. if all you run is the 599 hood, there's no telling if it will line-up nearly as well. also keep in mind that you can have potential "bowing" issues with even low-pressure hood shocks. if you're nit-picky, a hood-prop is the only way to go.

NOMIEZVR4
01-08-2012, 01:24 PM
Hey how much does the scoote hood weigh? I'm gonna be preping my car for paint this week and Im gonna bite the bullet and get it.

NOMIEZVR4
01-08-2012, 01:28 PM
Hey IPD can you post pics of your hood please? Thanks

IPD
01-08-2012, 05:32 PM
Hey IPD can you post pics of your hood please? Thanks

http://www.3si.org/gallery/data/586/medium/PICT0855.JPG
http://www.3si.org/gallery/data/586/medium/PICT08421.JPG
http://www.3si.org/gallery/data/586/medium/PICT0719.JPG

last pic shows where the hi-pressure shocks i had on it had partially deformed it. i'm unsure of the weight, but it can't be much more than 30 lbs, if that.

MR2
01-08-2012, 06:43 PM
more pics of that hood in raw state here Index of /car/Misc/hood (http://3000gt.com.au/car/Misc/hood/)

NOMIEZVR4
01-13-2012, 06:54 PM
For the OP...what happens when it rains or snows? Is your car garaged? Can you drive in the rain with this type of a hood??

anyonebutme
01-13-2012, 08:04 PM
For the OP...what happens when it rains or snows? Is your car garaged? Can you drive in the rain with this type of a hood??

I've driven without any hood at all for like a year, in the rain as well. What happens? Engine gets wet.

MR2
01-13-2012, 08:25 PM
I took pictures of the rough placement of the vents a while back showing what they are over (Radiator/exhaust manifold/front head) so in theory these parts would have increased corrosion.

anyonebutme
01-13-2012, 09:13 PM
I took pictures of the rough placement of the vents a while back showing what they are over (Radiator/exhaust manifold/front head) so in theory these parts would have increased corrosion.

True as well. Front turbo isn't all polished shiny anymore. Oh well.

MR2
01-13-2012, 09:49 PM
people who go for a hood like this are not "oh no my car will will not be shiney when I show people under the hood" they will be "becouse racecar" or "hop in, let me take you for a whirl ;}"

IPD
01-13-2012, 11:40 PM
my car is garaged, but it also sits out in the parking lot while i'm at work. only problem you have with it is that you should probably cover the battery (just in case) and you'll have to work harder to keep shit polished. that said, if you want to keep your bay COOLER...this is the way to do it. period. (exempting the removing the hood entirely).

anyonebutme
01-14-2012, 02:07 AM
my car is garaged, but it also sits out in the parking lot while i'm at work. only problem you have with it is that you should probably cover the battery (just in case) and you'll have to work harder to keep shit polished. that said, if you want to keep your bay COOLER...this is the way to do it. period. (exempting the removing the hood entirely).

Side note: Removing the hood completely doesn't help cooling at high speed, it hurts it slightly.

J. Fast
01-14-2012, 09:08 AM
I've been planing to order this hood which looks similar:
http://www.c7carbon.com/images/product_pictures/599racing.jpg

Cianci hood looks very functional. The vents being spread further apart actually makes a bit of sense too. More than likely when air's drawn thru the radiator it hit's the block and "Y" splits to those areas.

Damn those fenders! I've placed them in a shopping cart countless times but could never click "buy" when I saw the $120 shipping fee.


For the OP...what happens when it rains or snows? Is your car garaged? Can you drive in the rain with this type of a hood??

The hood comes with a Kevlar water cover that's removable. It worked but the hood vented much better when I pulled the cover off. The seldom occasions I was caught in weather I never had any issues.

I've never been concerned with the elements in owning an open vented hood. My concerns have always been with leaves and road debris. When you park under a tree in the fall leaves work their way into the engine bay. 1200 degree turbos and dry leaves can spell FIRE so you have to be conscientious about where you park and check the engine bay frequently.

As for road debris, crap snakes its way into the engine bay thru the vents. There's potential risk of a rock clipping a belt or something along those lines. If you run timing covers, sparkplug covers, and air filters you have veryy little to worry about regarding road debris.


Side note: Removing the hood completely doesn't help cooling at high speed, it hurts it slightly.

I could see how some would think removing the hood helps to keep cool. I've never ran hoodless but I'm going to guess without a hood a large portion of air normally captured and drawn thru the radiator fins is traveling around it making it cool less efficient?

Permanent grin
01-14-2012, 09:29 AM
It could do with a vent by the rear turbo though as all the vents are way in front of it.

André

MR2
01-14-2012, 09:38 AM
yeah the rear turbo thing is something that's been on the back of my mind for a while...

so do you put an intake in front of it or an exhaust...if an exhaust then you need to supply the rear turbo area with air somehow (the stock setup has air pass down past the turbo and under the car)

Permanent grin
01-14-2012, 09:41 AM
I would say exhaust and as for supplying it with air, there is plenty in the engine bay already. Any exhaust venting would just encourage more to be drawn through the FMIC / radiator and the apertures either side where the old SMIC were.

André

J. Fast
01-14-2012, 09:58 AM
I suppose if you really needed to vent the engine you could use the air tunnel plenum at the firewall. You really only need half the cubic area to run the interior fans so technically you could split the cavity in two. You could cut a hole in the plenum, block off one side, and run a puller fan dump to the exterior. Or you could nix the fan and just use aero to draw the air out. The tunnel is under the fresh air vents between the windshield and the hood it's 8" x 6" x 5' and it's hollow. The only thing in there is the steel wiper arms.

Permanent grin
01-14-2012, 10:19 AM
:hum:

J. Fast
01-14-2012, 10:32 AM
Look at your engine bays at the firewall. The seam that sits about 6" down. Everything from that seam up is hollow. It extends from the firewall to the windshiled and it's the width of the car :). I stared at it for about 30 mins when I was tearing out panels. Have I clued anyone in for my plans with that space?

Use aero and said cavity to pull heat out of the engine bay.

2fnloud
01-14-2012, 10:38 AM
So will that vent into the cabin, or will it vent to the outside?

J. Fast
01-14-2012, 10:48 AM
It could vent anywhere, just depends on how you want to duct it. You could use the heater entrace in the cabin and tape brake duct flex line, run it wherever you want, and dump to the exterior from the interior. As for the outside, it already vents to the outside. Pop your hood and pull one of those screens. You just have to attach a shape or contour to that cavity that will draw what's in there out. ;)

mb7050
01-14-2012, 03:43 PM
floor heating

bboyalan
01-14-2012, 06:51 PM
people who go for a hood like this are not "oh no my car will will not be shiney when I show people under the hood" they will be "becouse racecar" or "hop in, let me take you for a whirl ;}"
Hahaha Idk if I should agree or disagree with you.

My GT300 is proving itself worthy despite fitment. The weather forecast shows rain for tomorrow. I saw that the front PS vent slightly reveals the front Dejon pipe's filter. That would be my only concern if I were to have any.

NOMIEZVR4
07-11-2012, 05:52 PM
I want to buy this hood...aerokits website is down. Where else can this hood be found??

EDIT: Now its working finally!

Stealth_RT
07-11-2012, 10:10 PM
Problem with ordering from aerokits is they may or may not have a given hood in stock. If they don't, it could be months or a year before they get more in stock. I tried on and off for 2 years to find out when they would have a CF GT500 hood in stock for a 1G, with no luck. The only thing that sucks about the Scoot2 hood is that its only available in fiberglass, no CF option.

Any links to a ford GT500 hood vent? I might try that first, before sinking money into a fiberglass Scoot2 hood, bodywork , and paint.

NOMIEZVR4
07-12-2012, 01:10 AM
I want fiberglass, no acre for cf here. It is possible to get in touch with them to see if its in stock, right??

i3igpete
07-12-2012, 10:31 AM
Voltex Wind Tunnel Data (http://www.maxrev.net/site/index.php?option=com_content&view=article&id=100:voltex-wind-tunnel-data&catid=36:blog&Itemid=54)

http://www.maxrev.net/Icons/Voltex/voltex6.jpg

mb3000
07-12-2012, 11:09 AM
Good stuff right there!

J. Fast
07-12-2012, 11:43 AM
Good stuff right there, Pete!

Anyone have a side view of 3/S with tuft wool on the entire car while in motion? If someone had some extra free time it sure would be cool to see!

J. Fast
07-12-2012, 11:57 AM
Voltex Wind Tunnel Data (http://www.maxrev.net/site/index.php?option=com_content&view=article&id=100:voltex-wind-tunnel-data&catid=36:blog&Itemid=54)

Is it my eyes and this little phone screen, or does the air under the car look turbulant, quite scattered, and not traveling in a uniform direction? It looks like its swirling? Interesting to see the fastest air is not directly under the car even though it's a straight line. Almost looks like water traveling under a bridge where it swirls just as it clears the column.

guido1205us
07-12-2012, 02:12 PM
Man I thought my Cianci Victory hood that I'll finally get around to painting and installing would have huge benefits. I guess looks and just a little bit of benefit over stock is ok for my power needs.

anyonebutme
07-12-2012, 09:14 PM
Is it my eyes and this little phone screen, or does the air under the car look turbulant, quite scattered, and not traveling in a uniform direction? It looks like its swirling? Interesting to see the fastest air is not directly under the car even though it's a straight line. Almost looks like water traveling under a bridge where it swirls just as it clears the column.

no shots of the underbody with airflow on that page.

i3igpete
07-12-2012, 11:03 PM
there is video at 3:30 but it's not very helpful


http://www.youtube.com/watch?v=HpwPTyDC4do

anyonebutme
07-12-2012, 11:17 PM
there is video at 3:30 but it's not very helpful


http://www.youtube.com/watch?v=HpwPTyDC4do

lmao @ the ending. part 2 is pretty good as well.

Erron Spalsbury
07-13-2012, 11:38 AM
Cool videos. 15 pounds of lift in stock body form, yikes!

*Not to hijack but this is cool as well...

http://www.youtube.com/watch?v=5iCQ6kPe9EY

Which goes along with this.
http://www.sneed4speed.com/bmw-wind-tunnel-data-sneed-speed-wing-and-splitter-vs-competitor/

bigger dreamer
07-14-2012, 10:25 PM
omfg this if awsome what kind of looks and comments did you get while driving?

BaadVR4
07-18-2012, 06:49 PM
I think this is a real PRM hood. Bought it from a forum member on the "other" site. I can attest to the fact that this hood allows air flow from across the top of the front valve cover to the windshield. How do I know this, you ask? I left the oil filler cap loose and in less than 2 miles at a max speed of 45 mph, my windshield was absolutely covered with oil............. not exactly scientific, but pretty powerful "real world" empirical evidence.

http://i221.photobucket.com/albums/dd54/BaadVR4/95hood3.jpg

http://i221.photobucket.com/albums/dd54/BaadVR4/95hood2.jpg

http://i221.photobucket.com/albums/dd54/BaadVR4/95hood2.jpg

MR2
07-18-2012, 10:43 PM
Rotate left :p

IPD
07-19-2012, 02:37 AM
yikes....i hope that's not sherri's car in the background.

BaadVR4
07-19-2012, 09:55 AM
If I knew how to rotate a picture, I'd be giddy with the new-found skill. Sorry I'm so challenged.

BaadVR4
07-19-2012, 09:56 AM
No, that's the 94 clone of Sheri's car. But it did come with a NIB OEM Mitsu front bumper.


yikes....i hope that's not sherri's car in the background.

BaadVR4
07-19-2012, 09:56 AM
But what about the hood?????????????????????????????????

J. Fast
07-19-2012, 10:28 AM
Tape and tuft wool, or caution tape cut into 1/4" X 5" strips Milt. Doo eett!

terrets
07-19-2012, 09:30 PM
Where are the pictures of oil all over the windshield? :p

BaadVR4
07-19-2012, 10:13 PM
If the car (or if any of the 5 TT cars we own) ran, I might try that. The oil incident was several years ago. It didn't seem significant at the time. Except as yet another example of my senility.

BaadVR4
07-19-2012, 10:15 PM
Hopefully, one or two of them will be running in the next month or so. Soon as I finish getting our rental house ready to rent.