View Full Version : Engine stand
Miguel92.3000GT
09-07-2011, 08:58 PM
Im going to buy an engine stand for a spare motor I have. But I dont know where to place the screws. Does anyone have pics of their engine on a stand?
Miguel92.3000GT
09-09-2011, 10:50 PM
no one has any pics
it becomes remarkably obvious when you get the hoist next to the engine
http://3000gt.com.au/car/74%20vs%2075/6g74/DSC01301.JPG
http://3000gt.com.au/car/74%20vs%2075/6g74/DSC01300.JPG
BaadVR4
09-10-2011, 01:27 PM
Like he said...............it will only fit one way if you use all four arms. I promise you'll figure it out as soon as you look at it. If you can't figure it out, please reconsider any decisions you may have made regarding working on the car by yourself. Just my 1.5 cents worth.
Miguel92.3000GT
09-11-2011, 12:02 AM
thanks for the pics, ive worked on the motor but never on a stand and just wanted to get an idea of it.
FeaRpb
09-11-2011, 01:31 AM
What are the specs on the bolts used?
they are the bigger bolts for the gearbox, so you'll find them in the manual...I think 10x1.5 ish
speedy25
09-11-2011, 10:53 PM
Tip: Be REAL CAREFUL when angling the engine from upright. (unless you buy the expensive model with the geared head.)
-SP
Tigchamp
09-17-2011, 06:11 PM
Tip: Be REAL CAREFUL when angling the engine from upright. (unless you buy the expensive model with the geared head.)
-SP
Yep, the engine is realy top heavy on an engine stand.
Jeff
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.