PDA

View Full Version : Spyder ECU successfully reprogrammed!!!!!!!!!!!!!!



Jimvr4
09-04-2011, 08:47 PM
Background - A spyder owner sent me his Top ECU for troubleshooting and I determined the 68HC711E9 microchip was bad. The following describes the effort to communicate to and reprogram the chip using an old M68HC11 serial programmer.

SUCCESS!!!!!!!!!!!!!! …………………….finally!

I received the programmer from Bob on Thursday, opened it up and realized I needed to get a serial port going since Bob couldn’t spare his USB serial converter. On Friday I stopped at Frys and picked up an FTDI based USB to serial converter and I spent a couple of hours trying everything I could think of and it would not talk to the programmer. Of course I had done loopback testing, etc but nothing worked.

Saturday afternoon I got back to Frys and returned the converter and picked up an IDC10 to serial cable after learning that my motherboard had an internal serial port that just needed to be brought out. Got that one home and nothing. Opened it up and finally figured out the wiring was wrong for my motherboard. So I rewired it twice before getting it right and finally tried it with the programmer under DosBox. Still nothing – wouldn’t connect. I decided to try to build a bootable DOS CD with Prog11 on it and took forever to figure out that my SATA drive could not be recognized by DOS and I would have to embed the files into the boot image itself. Got that done and working and when I started it up I got a “runtime 200” error so I had to give up.

Finally I tried going back to my DosBox setup and this time the damn thing WORKED.

So, I popped in Jim L’s chip into the programmer and read it and dumped the .S19 file. I then put a blank chip in and programmed it with the .S19 file and installed the new chip into MY own ECU (remember my theory was the output port in Jim L’s chip had failed). The newly programmed chip on my ECU had the SAME failure symptoms that Jim L’s original chip had on his ECU. I discovered that the difference between the brand new chip and MY chip was only in the EEPROM sector, the program sectors were identical.

So, I dumped my own chip and made a new .S19 file and programmed the EEPROM portion into the test chip and Jim’s ECU worked fine with that. I thought I found the ECU serial number location in EEPROM but when I attempted to rewrite JimL’s serial number into the chip, Toplink sees it as blank. So I programmed a new chip and it WORKS on JimL’s ECU but the serial number is blank.

Then I reprogrammed the EEPROM on his BAD chip with MY EEPROM values and now his BAD chip works fine as well but has a blank serial number. So it wasn’t the bad port at all. Something in the EEPROM wasn’t right but I have no idea what. I noticed that there are two copies of EEPROM at different addresses and both copies were the same even on the bad chip. So it didn’t appear to be EEPROM corruption. So now I have two working chips for JimL.

But what I can say for certain is I can take a Spyder Top ECU chip and DUPLICATE it.

JimVR4 :)

green-lantern
09-04-2011, 09:09 PM
Very cool, Congrats

Hans@GZP
09-04-2011, 10:21 PM
Thank god you have the programming knowledge Jim. That's a huge discovery for the spyder owners.

ChargerX3
09-05-2011, 01:34 AM
Now if only you could program tables...

TurboSinceBirth
09-05-2011, 02:23 AM
Kudos for figuring that out. It's way over my head. I'm more of a mechanical guy.

R/T93
09-05-2011, 02:40 AM
Me Mongo, Mongo like candy. Thats how I feel when you just explained all that.

Good work!

BlackStealth
09-05-2011, 08:13 AM
Definitely cool. There is a 1995 Spyder ECU rom dump floating on the internet for some time, I wonder if they used the same process to read it.

Greg E
09-05-2011, 03:23 PM
If you send me a copy of the ROM Jim I can start disassembling it. :)

NOMIEZVR4
09-05-2011, 08:10 PM
Hmm...maybe this isn't just limited to spyders..maybe all 94-95 VR-4's and Stealths...Keep us posted!!

aaronatstate
09-05-2011, 08:29 PM
Hmm...maybe this isn't just limited to spyders..maybe all 94-95 VR-4's and Stealths...Keep us posted!!

Dont seem to remember too many Stealth's that had a retractable hard top...

BlackStealth
09-05-2011, 09:10 PM
Hmm...maybe this isn't just limited to spyders..maybe all 94-95 VR-4's and Stealths...Keep us posted!!
Yes, you could be right. My guess Mitsubishi would use the same style ECU for the 3000GT as they would for the 3000GT Spyder.

Hans@GZP
09-05-2011, 09:18 PM
Dont seem to remember too many Stealth's that had a retractable hard top...

Jim said ECU... meaning Engine Control Unit.... I'm pretty sure they both have engines :p

and yes, spyders use the same ecu as the coupes.

Emilie@GZP
09-05-2011, 09:58 PM
Jim meant the top computer, not the engine computer.

Jeremy C
09-05-2011, 10:00 PM
I would sooo pay to have the ability to flash my ecu. It would be wonderful to not have to use the t-pro for all correction and get the ecu back into line.

Emilie@GZP
09-05-2011, 10:10 PM
I would sooo pay to have the ability to flash my ecu. It would be wonderful to not have to use the t-pro for all correction and get the ecu back into line.
......

Jim meant the top computer, not the engine computer.

Chris95RT
09-05-2011, 11:52 PM
Aww Emily ruined it, boooo

Chris95RT
09-05-2011, 11:53 PM
Jim said ECU... meaning Engine Control Unit.... I'm pretty sure they both have engines :p

and yes, spyders use the same ecu as the coupes.

It also means Electronic control unit, :p

ChargerX3
09-05-2011, 11:54 PM
jim meant the top computer, not the engine computer.

wtf!!!!

Jimvr4
09-06-2011, 02:40 AM
Definitely cool. There is a 1995 Spyder ECU rom dump floating on the internet for some time, I wonder if they used the same process to read it.

I'm sure a similar method was used. Basically identify the MCU chip and then get a development board to pop the chip in and dump the code.


If you send me a copy of the ROM Jim I can start disassembling it. :)

PM me if you really want to help :) Although I'm unsure if Spyder owners could benefit at all if we could change the top operations.


Dont seem to remember too many Stealth's that had a retractable hard top...
Ha ha, I'm sure some people would want it if they could...


Jim said ECU... meaning Engine Control Unit.... I'm pretty sure they both have engines :p

and yes, spyders use the same ecu as the coupes.
Hans, I'm surprised at you. We have an EFI ECU, ABS ECU, SRS ECU and probably others I forgot to mention. How many engines do you think one car has :p


Jim meant the top computer, not the engine computer.

Correct ;)


It also means Electronic control unit, :p

We have a winner !!!!:D

Hans@GZP
09-06-2011, 09:57 AM
meh, we just use TCU (tranmission control unit), SRS computer, ABS computer, etc. ECU is pretty standard in the automotive industry as meaning engine control unit..... so there :p

Jimvr4
09-06-2011, 12:23 PM
Nah, you're confusing ECU with ECM - Engine Control Module. We wouldn't want to confuse tribal knowledge with standards now would we?? :p

beepbeep
09-06-2011, 12:29 PM
Way to go!! Feels good, I bet!!!

Chris95RT
09-06-2011, 09:18 PM
Nah, you're confusing ECU with ECM - Engine Control Module. We wouldn't want to confuse tribal knowledge with standards now would we?? :p

We're a people separated by a common language, hah.

ChargerX3
09-07-2011, 12:46 AM
Thread just got boring zzzzzzzzzzzzzzzzzzz...

Gearheadvr4
09-07-2011, 10:42 AM
Yup, I'm hoping one day to see a thread like "All 2nd gen ECUs (engine control units) can be easily programmed like the 99 ECU."

Jeff V.
09-07-2011, 11:33 AM
Yup, I'm hoping one day to see a thread like "All 2nd gen ECUs (engine control units) can be easily programmed like the 99 ECU."

You people who still hold onto this bullshit need to understand what the terms "one-time programmable EPROM" and "Mask ROM" mean.

IT

IS

I M P O S S I B L E

ChargerX3
09-07-2011, 12:30 PM
I hope that one day Tom will get back to the hardware side of figuring this out. Until then 98-99 Ecu's for me.

Gearheadvr4
09-07-2011, 12:57 PM
YES

I

KNOW

My post was a half hearted joke that didn't require such a rude response. I know the ECU as it sits cannot be programmed the way we want.

Greg E
09-07-2011, 10:27 PM
You people who still hold onto this bullshit need to understand what the terms "one-time programmable EPROM" and "Mask ROM" mean.

IT

IS

I M P O S S I B L E

Ah!!!

Look who got sucked into registering! :p

BlackStealth
09-07-2011, 11:01 PM
Even a One-Time PROM would be a cool option (get the bulk of the injector correction done at the ECU level). Too bad the topic post is misleading, as the poster didn't include one important adjective, only misleading us.

The current 98/99 flashable ECU solution is so fantastic that we don't have to look at any other solutions, especially since the flashable ECU can be made to work on all year model stealths/3000GTs.

Jimvr4
09-08-2011, 06:28 PM
Too bad the topic post is misleading, as the poster didn't include one important adjective, only misleading us.



Sorry about that! I was pretty exited when I posted and wasn't thinking about engine management pursuits at all. Made for an interesting thread though...

Technically what I did isn't even programming. I'd like to get this back on topic (Spyder top ECU) but I'll need to get some help on disassembling the code I captured. Anyone want to help out? I'd like to figure out exactly why the bad chip would not actuate the top pump.