View Full Version : new invetment
shmoo
09-04-2011, 03:43 AM
i've been looking for a daily driver for the past month or so, my clutch chatter is really starting to worry me.
so, i managed to pick this up:
sadly these are the best pictures that i have. at least that i have taken.
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002915.jpg
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002913.jpg
and this..:
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002916.jpg
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002918.jpg
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002917.jpg
i'm hearing that if she got hot enough to melt that plastic, that i most likely will need to do a rebuild. maybe even get a new block.
my friend dave whom helped me out for twelve hours after i really only payed him for eight hours of his time.. said that he might try to put it back together and see if it starts and drives.
i'm hoping that would only be:
`splicing new wires in for the injector harness. (i don't know how to wire yet.)
`ecu
`front plugs and wires
` and seeing where i stand.
`front lower subframe i believe it's called
i think that might be a waste of time, when i actually bought her to daily drive.
what i'm wanting to do is pull out the motor
-i'd like to use a picker(hangman pole looking deal) and take the motor out through the top, but i don't have one.
dave said for situations without a picker you can take the motor out from the bottom by unbolting the lower subframe and your axles/ hubs.. struts blahh. imaginary line around what you want out and then lifting the front of the car off with a couple of friends, or jacks
-or dave said i should consider just flipping it to try to make money.
in le garage i've got a four bolt block, four bolt heads that are 67% complete, crank that i think is good so i'm in a decent position to do a rebuild.
what do you think i should do?
thanks!
_isiah
ediT: and luckily i fucked the title up.
Amphiron
09-04-2011, 07:19 AM
What the hell happened may I ask?
shmoo
09-04-2011, 01:15 PM
well, of course you may ask.
i bought her like this, so i'm not exactly sure what happened. daniel said she overheated.lol
TwIzTeD_3kGt
09-04-2011, 02:16 PM
Is that RTV in place of the valve cover gaskets, or did the gaskets melt? :eek:
MADMarc
09-04-2011, 03:28 PM
Hell yea it overheated, lol. GL w/the project. How's the extra motor you have in the garage? If the additional parts you already have are in solid condition I say tear into it! :D
...now, I'm just gonna ask because I know someone else is curious too, what'd you get it for?
93STLTH
09-04-2011, 04:08 PM
Most people get a daily driver that's some what in need, but able to go when you need it.
It's definitely a project, let's just hope it doesn't turn into an expensive project.
TT4ME
09-04-2011, 07:52 PM
Schmooo, you crazy man!!
GL with the build/restore!
familyMAN
09-05-2011, 01:31 AM
So...you had a little clutch chatter and bought a car that melted itself??? Seems backwards to me, but I understand...I got tired of buying parts for my vr4 build and bought a project turbo miata instead:)
familyMAN
09-05-2011, 01:34 AM
You can get a cherry picker (engine hoist) from Harbor Freight for only $100 if you use one of the coupons from the back of any car magazine you'll find out the shelves.
shmoo
09-05-2011, 02:58 AM
Is that RTV in place of the valve cover gaskets, or did the gaskets melt? :eek:
well, i wouldn't doubt that the gasket is fubared. it has to be pulled either way. what should i use to reseal when i put her back together?
Most people get a daily driver that's some what in need, but able to go when you need it.
It's definitely a project, let's just hope it doesn't turn into an expensive project.
i know,lol
60 percent of my car community is always on me.:w00t: the people that heard my plan two nights prior to picking her up were skeptical. butt.. so was i.
i just wanted something that i was going to enjoy working on. that put me at a mitsubishi. i looked and looked. almost had a 1g eclipse with a 16g missing a head and such for 500, but mike:Doh: with the prelude for life ended up with it.
i honestly need a dd now, but, i'll deal with it. by the way, my car goes wah wah wah, doesn't start, then fires up quickly. 11.9 volts with the car off. starter? my alternator is due for a replacement, but that's not how it usually breaks.
and yes, i'm hoping for nothing crazy. i'm currently broke.
So...you had a little clutch chatter and bought a car that melted itself??? Seems backwards to me, but I understand...I got tired of buying parts for my vr4 build and bought a project turbo miata instead:)
i don't have a little clutch chatter anymore. it seems to be getting louder and louder. and i have good reason to believe that the clutch will fail.
i could have either spent 700ish on something that i wasn't so happy with, or 900ish on a bike, or 1000 on something that i'd be happy with. i sort of see it as an extension of my hobby, that will end up being convenient.
You can get a cherry picker (engine hoist) from Harbor Freight for only $100 if you use one of the coupons from the back of any car magazine you'll find out the shelves.
yeeeah i know., i'm broke.. and if i can pull it out with things that i already have, i should spend money on the rebuild itself.
_isiah
shmoo
09-05-2011, 03:09 AM
Schmooo, you crazy man!!
GL with the build/restore!
thank you, thank you..and i'll need it..
Hell yea it overheated, lol. GL w/the project. How's the extra motor you have in the garage? If the additional parts you already have are in solid condition I say tear into it! :D
...now, I'm just gonna ask because I know someone else is curious too, what'd you get it for?
i don't have a full motor in the garage. i have four bolt heads, that need rockers, rocker arms, and 12 3rd gen lifters preferably. the valve springs are already installed, but i don't think i should trust that. and cam gears, i have the shafts. and i have a four bolt block and crank. i Think the crank is good, i want another opinion. but i'm starting to think i'll need more than that..
i think i should tear into it either way. i could throw her up for sale to try and make money, but wauhhh. i fuck things up often enough, i should step slowly.
i just added it up. total investment as of today, including everything from daniel's smokes and dr. pepper i believe to the price of the car out of impound is 1131, and possibly coins. but i do owe le shop 20 dollars for the trailer, and some undiscovered amount of money to dave for his four hours of overtime.
gotta geau!
_isiah
Jimvr4
09-05-2011, 11:57 AM
well, i wouldn't doubt that the gasket is fubared. it has to be pulled either way. what should i use to reseal when i put her back together?
_isiahI used a new gasket and a very thin layer of Permetex blue. Absolutely no leaks.
Boomer3000
09-05-2011, 07:14 PM
There ya go buddy!!! +1 for cheap TT's being brought back from the dead! When I found mine for 600 it was in close to the shape yours is in. Now I could drive it ever day!!
familyMAN
09-05-2011, 07:21 PM
Good luck shmoo! Looks like one hell of a learning experience! If you need any stock 1g parts let me know. I'll have a spun bearing 2-bolt, stock 1g heads (no issues), stock turbos and manis, and even a good forged crank available shortly.
Just don't neglect the VR4 in the process! It's still one of my favorite 1g's. Love the 99 sails with wingless rear. Just need to put 1g sides back on;) (I know you don't agree:))
shmoo
09-06-2011, 02:36 AM
I used a new gasket and a very thin layer of Permetex blue. Absolutely no leaks.
thank you, where'd you get your gasket from? an oem one?
There ya go buddy!!! +1 for cheap TT's being brought back from the dead! When I found mine for 600 it was in close to the shape yours is in. Now I could drive it ever day!!
that'll take me a second, but i can't wait.
Good luck shmoo! Looks like one hell of a learning experience! If you need any stock 1g parts let me know. I'll have a spun bearing 2-bolt, stock 1g heads (no issues), stock turbos and manis, and even a good forged crank available shortly.
Just don't neglect the VR4 in the process! It's still one of my favorite 1g's. Love the 99 sails with wingless rear. Just need to put 1g sides back on;) (I know you don't agree:))
i've got a good amount of parts, but i may be needing some head internals. like rockers and rocker arms. do you know if 2 and four bolt heads use the same internals?
thanks man! you know the 2g side skirts are smoother than 1g's. especially with the 99 sails
yeah, i'm excited to rip in. i'll be starting tomorrow if i don't stay up too late tonight, and it's nice tomorrow.
i'm about to start looking up information to drop the motor out from the bottom. in order to save money and whatnot. any hints? who am i calling for help?
_isiah
Jimvr4
09-06-2011, 12:41 PM
thank you, where'd you get your gasket from? an oem one?
_isiah
Yeah, for each valve cover you need the MD186786 gasket and three of the MD186787 spark plug gaskets. I used Permetex blue and coated the whole gasket with a thin layer. It's easier to work the gasket alone and then bring the valve cover to the gasket. I did the three spark plug gaskets first and then fitted the main gasket into the valve cover. I then let the cover sit on the cardboard with the weight of the cover pressing down on the newly coated gaskets while I went to the car and installed a thin layer of RTV around the rim of the head. Then I installed the valve cover and torqued it down to factory specs.
http://jns.jimnshar.com/11d80a90.jpg
DrGonzo
09-06-2011, 01:01 PM
Yeah, for each valve cover you need the MD186786 gasket and three of the MD186787 spark plug gaskets. I used Permetex blue and coated the whole gasket with a thin layer. It's easier to work the gasket alone and then bring the valve cover to the gasket. I did the three spark plug gaskets first and then fitted the main gasket into the valve cover. I then let the cover sit on the cardboard with the weight of the cover pressing down on the newly coated gaskets while I went to the car and installed a thin layer of RTV around the rim of the head. Then I installed the valve cover and torqued it down to factory specs.
http://jns.jimnshar.com/11d80a90.jpg
I do the same thing every-time with my gaskets. I have the Permatex red on there now "High Heat" as that's what I had laying around when I did them last time.
Just make sure that both surfaces are clean and oil free!!! Any oil on the surfaces will cause the RTV to not bond and most likely cause an oil leak.
shmoo
09-06-2011, 07:19 PM
thanks!!
i'm still pickerless.. how should i start pulling this motor? all i've done thus far is move the car to an appropriate spot in the driveway, and take off the front wheels.
i don't want to just start pulling shit.
originally i was going to try and pull everything up to the head and then deal with the drivetrain, and the block if necessary. what do you think?
_isiah
TT4ME
11-07-2011, 08:09 PM
Update!?
um, that's not a dd. that's another project car. 2 project cars does not make 1 dd.
green-lantern
11-07-2011, 10:36 PM
when i actually bought her to daily drive.
And why my friend would you buy that for a daily driver?
CoopKill
11-07-2011, 10:43 PM
He is not working on it due to being in WA State, many many miles from the thing.
green-lantern
11-07-2011, 10:50 PM
He is not working on it due to being in WA State, many many miles from the thing.
And why my friend would you buy that for a daily driver?
green-lantern
11-07-2011, 10:54 PM
Best definition I could find for a DD. Kind of sad
* 100% reliability...it HAS to start and run when I need it to, not when it feels like it
You need it to run reliable and cheap!
CoopKill
11-07-2011, 11:11 PM
And why my friend would you buy that for a daily driver?
I would not, but...
futurevr4man
11-08-2011, 09:34 AM
shmoo, you have a heck of a time ahead of you! engine rebuild add up fast... might be time to start looking for a source of income
shmoo
11-08-2011, 04:42 PM
um, that's not a dd. that's another project car. 2 project cars does not make 1 dd.
inCorrect!!!
i forgot about this thread. i'll update it after i check out my car.
EthanS
11-09-2011, 12:40 AM
I thought I recognized the car. I have the missing headlight on my car now haha! Good luck on the rebuild Shmoo!
shmoo
11-09-2011, 01:26 AM
He is not working on it due to being in WA State, many many miles from the thing.
thank you!
And why my friend would you buy that for a daily driver?
did i really get asked that question on a 3s forum? by someone that i've communed on beer and cigarettes with.. i seriously thought everyone wanted to daily drive a tt..
Best definition I could find for a DD. Kind of sad
You need it to run reliable and cheap!
well, once i get her running, the other two will be possible. hell, anibel has been pretty reliable for me, and i plan on keeping the stealth stock.
I thought I recognized the car. I have the missing headlight on my car now haha! Good luck on the rebuild Shmoo!
thanks man
give it back now, ya hear! but really. i'm glad one of My missing pieces is in good hands
_isiah
93SlugTT
11-09-2011, 01:35 AM
man, good luck.
green-lantern
11-09-2011, 01:28 PM
Well good luck, I’m glad you got it running
I'd say everyone wants to DD drive a sportscar but affording it is usually the reason to get a sensible DDer.
shmoo
12-03-2011, 03:37 AM
wohh wohh.. sensible? two turbos and awd is always sensible. you're starting to worry me paul
baump, i'll work on getting some motor out pictures up here.
_isiah
dfoster101
12-26-2011, 04:33 AM
hows that car coming along shmoo ? really interested to know
green-lantern
12-26-2011, 03:26 PM
Hopefully he is driving it all over the place.
shmoo
12-27-2011, 01:44 AM
hows that car coming along shmoo ? really interested to know
how goes it man. the car is going no where for now. i'm in the state of washington, and the car is still in missouri. however there have been new developments. i took the motor out before i left the state. before i left, i pulled the turbos, (sold them :() front valve cover, starter, alternator (which is in my car now),and cam angle sensor.
but, about a month ago, the kid who took my gsxr notified me that he is interested in trading back my gsxr for his 6g72 parts. which are the parts that i planned on building the stealth with. i want muh bike back, so we'll have to see how it plays out. and i Don't plan on parting her out, unless it's just the motor.
Hopefully he is driving it all over the place.
haha, paul.. you know where i'm at! but, i am driving ani all over the place.
i can't wait for ng! i hope i can afford to make it! if i can afford it, there's little that would stop me. y no, sleeping in the car would not stop me.
_isiah
shmoo
12-27-2011, 02:20 AM
motor:
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002934.jpg
out:
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002935.jpg
mmhmm:
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002936.jpg
http://i144.photobucket.com/albums/r171/shmooly/stealth%20rttt/S5002937.jpg
sorry, i forgot all about my motor out shots. i don't have anything more up to date. unless i can find of the stealth on the trailer.
bahboom
_isiah
dfoster101
12-27-2011, 03:24 AM
im mainly curious what condition the transfer case is in from being towed wrong .... and what the final diagnosis on the motor... is it salvagable at all or is it totally frozen or what
shmoo
12-27-2011, 03:58 AM
i sadly never opened the transfer case up to take a look. it took me longer than expected to get the everything off of that car.
and i never even attempted to fire the car up. i figured there was no point, and i didn't feel like pulling my ecu to slap it into the stealth.
i'll try to remember to let you know what happens with the car, otherwise pm me or check up in this thread.
_isiah
dfoster101
12-27-2011, 04:49 AM
right on ,,, well at any rate i hope it dont take you all too much to get it up n running .. be a good score for ya ...
in for shots of what you find :)
atleast pull the oil out of each spot and see what's in it :D
maybe shine a torch in the cylinders or something :D
green-lantern
12-27-2011, 06:12 PM
haha, paul.. you know where i'm at! but, i am driving ani all over the place.
i can't wait for ng! i hope i can afford to make it! if i can afford it, there's little that would stop me. y no, sleeping in the car would not stop me.
_isiah
Start putting money in a jar (and don't pull any out). Just 10 bucks a week will probably do it. You won't really miss it if you do it a little at a time. You might be able to even get a room this year. lol :D
shmoo
01-03-2012, 07:28 AM
that's a pretty good plan.
i'll see what happens once i get home.
i don't want to sell her, but i may. blahhh
_isiah
dfoster101
01-29-2012, 06:39 AM
updates damn it.... updates !!! lol
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.