View Full Version : Pulley Part Numbers:
3000GTCSULB
08-29-2011, 12:41 PM
92 VR4
JA3XE74CXNY019109
I'm hoping someone has access to these part numbers: Please see arrows, these are the idler pulley and 2 different tension pulleys.
http://i88.photobucket.com/albums/k193/Rgarcia9/PulleyPartNumbers.png
Thanks for your help. :mitsu:
I got quoted 1.5 hours to replace the outer idler and tension pulleys. But now I see there is another pulley in there on the inside belt, which might be more expensive to do?
dbest671
08-29-2011, 05:42 PM
Check on the blue arrow, not 100% sure on that one
MD140071- should be the green arrow
MD319022- Red arrow
MD319474- Blue Arrow
Steve '92ES
08-29-2011, 07:43 PM
MD140071- should be the green arrow
MD319022- Red arrow
Those are the timing belt pulleys, not the drive belt pulleys!
Here's what I got...
MD318474- should be the green arrow**
MR360357 (Replaces part # MB630326)- Red arrow
MD172379- Blue Arrow
** For reasons unknown to all mankind it's cheaper to get the whole AC tensioner assembly with the bracket and bolt than just the pulley???
MB609656
dbest671
08-29-2011, 08:19 PM
^You're right, I had so many things pulled up in ASA, lost track.
However for the red arrow, I get md318474
Steve '92ES
08-29-2011, 09:33 PM
You're right, I appear to have those backwards.
It should be:
MR360357 (Replaces part # MB630326)- should be the green arrow**
MD318474- Red arrow
MD172379- Blue Arrow
** For reasons unknown to all mankind it's cheaper to get the whole AC tensioner assembly with the bracket and bolt than just the pulley???
MB609656
3000GTCSULB
08-30-2011, 02:03 PM
Thanks for the help. I ordered the pulleys, all of them matched, the AC tensioner assembly is now MR398079 though. (Green Arrow).
Is this software that you have to look up parts, or is it a website?
Steve '92ES
08-30-2011, 02:16 PM
I used a program called CAPS, it's the program Mitsu used to send out to the dealers.
You can get it here: Stealth 316 - WINCAPS Installation (http://www.stealth316.com/2-wincaps.htm)
dbest used ASA, which is a newer program that runs on Vista and Windows 7.
I've never tried it and I don't have a link to it but if you search for it I'm sure you'll find it.
dbest671
08-30-2011, 02:37 PM
^ I use ASA on Windows XP, but it will work with Windows 7. I find ASA more user friendly than CAPS... and I can copy and paste part numbers.
Google Translate (http://translate.google.com/translate?hl=en&sl=ru&tl=en&u=http%3A%2F%2Fwww.dsm-club.org%2Fforum%2Ffaily%2F15906-mitsubishi-asa-mitsubishi-aftersales-support-application.html)
3000GTCSULB
09-08-2011, 06:17 PM
For posterity:
The pulley causing the chirping was the idler pulley. MD318474 (Red arrow).
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.