Tons of misc parts for sale. Stock and performance stuff. Come browse the pics.

[2root4u]

After selling my last 3S quite a while ago (back when 3Si was the place to be), I've finally gotten around to going through my boxes of 3S stuff. I don't have time to research reasonable prices for each little item, so I'm just posting a bunch of pictures to browse. If you're interested in one or more items, just PM me or post with what you want and an offer (including shipping via UPS). Picking up more is better to motivate me to package up the set and drive to ship it.

Sorry for the lack of an organized sale...on with the pics:

https://picasaweb.google.com/111592576520780285042/3sStuffForSale?authkey=Gv1sRgCKuLiISLs5qfrQE

This is only half of the boxes I have, so more to come.

Only one major item I have for sale, and that is a brand new in the box Cianci Victory Racing 1gen hood. Black shiny fiberglass on both sides, functional scoop, louvers cut-out by Cianci before shipment. Never used. Just sat in the box for years and years. Must pick up local because I think freight was about $175 when I bought it. If you're willing to pay that kind of freight and arrange pick up, then we can talk. I'm in Northern VA for anyone interested in local pickup.

Current Cianci link for this hood:
1991-1993 Victory Racing Hood / Bonnet [CR-3SH03] - $650.00 : CIANCI USA, Mitsubishi 3000GT, Dodge Stealth, Nissan 350z, Chevrolet Corvette, and more!, Wide body kits, hoods, fenders, bumpers, spoilers, side skirts (http://www.cianciusa.com/1991-1993-victory-racing-hood-bonnet-1.html)

Some of the items in the gallery:
- speaker sub box
- carpet trim
- racing gas container
- stock air box with K&N
- Blitz air intake with adapter
- manuals
- 2g Stealth turn signal
- Blitz boost gauge and peak hold - New in box
- Small blitz boost gauge (non electronic)
- 2g headlight bulbs
- Misc Stinger battery connection pieces - New in boxes
- UR pulley
- Leak down tester
- Fuel railes with AN adapters - front polished
- Lower intake plenum polished - helicoiled
- Greddy BOV
- Shift knobs
- 5" exhaust tip
- Red mobo leathers shift boot and ebrake boot
- Test pipe
- Manual boost controller
- Mitsu locking lugs - New in box
- Star Hoffman CLT-2 Cylinder Leakage Tester - $45 shipped

[shmoo]

price on plug wires? what is in picture 125 exactly? price on just the fuel rail an line adapters? price on ur pulley?

you don't have the second gen headlight projector housings too, do you?

of that list, what will my undying gratification be a sufficient trade for?

_isiah

[Valhallaz]

How much for that corner sub box with or without the sub? And what's the sub model?

[2root4u]

price on plug wires? what is in picture 125 exactly? price on just the fuel rail an line adapters? price on ur pulley?

you don't have the second gen headlight projector housings too, do you?

of that list, what will my undying gratification be a sufficient trade for?

_isiah

For the plugs, I'll throw in both sets (one is missing a wire) for $40 shipped.

Fuel rail with AN fittings, $40 shipped.

Pulley, $40 shipped.

No 2g projector housing.

Undying gratification is good one for compliment. Nice looking car in your sig.

[2root4u]

How much for that corner sub box with or without the sub? And what's the sub model?

Sub is a RF Punch XLC...probably ~2005.

Shipping is going to be a lot on that piece, I know. $100 shipped for box and speaker.

[2root4u]

what is in picture 125 exactly?
_isiah

Those are fog lights. I never used them and I don't know what all is in the box. They came from a relative of mine. If you buy some of the other stuff, I'll throw them in for $5 extra.

[MADMarc]

Some goodies in there. I will keep an eye on this one when funds roll in :) GL w/your sales.

[Bluejediz]

How much for the greddy shift knob. In good condition?

[GRSHOPR]

How much for the Greddy BOV to 53140? Is pic 167 a short throw shifter? If so, what model? Pics 90-96, what are they of? I have first gen Blitz EBC, looking for the other half, for the power calculations. Can't remember the exact name of it right now. How much for the Greddy Turbo Timer? All of these shipped to 53140, and dibs on them all, pending prices. Thanks.

[2root4u]

Sorry for the delay...didn't have email notifications turned on with the thread subscription.

- Greddy shift knob. I can check when I unbury this box in my garage -- just moved. I want to ensure the threads are in good shape.

- Greddy BOV -- $45 shipped alone. Yes, pic 167 is a SS. Can't remember who used to sell these on 3si.org though. Pic 90 is a Blitz MAP sensor. 91-94 are a Blitz Peak/Hold box. Same as the one pictured new in the box -- this is the one I used to have on my car. Probably not what you need for your Blitz EBC. Note that the turbo timer is exactly as shown. I don't have any harness, but it can be easily spliced in if you find the manual online. BOV + MAP + SS + Turbo Timer = 100 shipped

[MADMarc]

Might you still have that speaker box? Shooting you a pm now.

[TurboSinceBirth]

GLWS. I'm sad to see your old car go Rob but I gave up on finishing the project after a recent hail storm and a local shop messing up on replacing the copper wire for the o-ring'd block I'm guessing the Panama owner of the car had GT-Pro build. After buying the car with a bad rear 3076R turbo and a spun bearing motor I had no idea about the recent mishap with a local machine shop not fixing their screw ups was what made me lose interest. I'd driven it 0 miles since you sold it to me and it only ran about 15 minutes total. I no longer have space for it since it has been stored at a friend's house this whole time nor do I have time for a big project. If it doesn't sell I'll be forced to scrap the car because I have no other choice even though I've already had the chassis for sale for a few months now.

[2root4u]

GLWS. I'm sad to see your old car go Rob but I gave up on finishing the project after a recent hail storm and a local shop messing up on replacing the copper wire for the o-ring'd block I'm guessing the Panama owner of the car had GT-Pro build. After buying the car with a bad rear 3076R turbo and a spun bearing motor I had no idea about the recent mishap with a local machine shop not fixing their screw ups was what made me lose interest. I'd driven it 0 miles since you sold it to me and it only ran about 15 minutes total. I no longer have space for it since it has been stored at a friend's house this whole time nor do I have time for a big project. If it doesn't sell I'll be forced to scrap the car because I have no other choice even though I've already had the chassis for sale for a few months now.

Sorry to hear about all the problems and that things went so wrong on the rebuilds. After the initial issues, I was hoping your rebuilds would go smooth and you would have a killer stroker on your hands...but something about these cars, things just seem to get messy. Whatever direction you choose next, I wish you the best of luck. Dealing with the complications of a full build drove me to simplicity of a BPU type setup on a different platform.

[Boomer3000]

pm sent

[J. Fast]

$20 for Blitz Master Power Disconnect to 80237?

[guido1205us]

Sub is a RF Punch XLC...probably ~2005.

Shipping is going to be a lot on that piece, I know. $100 shipped for box and speaker.

I'll take corner sub box if you still have it. Shoot me a pm with paypal and shipping to 55406.

[2root4u]

$20 for Blitz Master Power Disconnect to 80237?

I have to head out on travel for the next 2 weeks. If you're still interested, I can dig it out. Also if you're talking about the kill switch, I don't think its Blitz. Can't remember what the brand is. Or send me the pic you're referring to in case I'm misunderstanding.

[2root4u]

Custom corner sub sold.
Greddy BOV sold.

Anyone in the DC area need a New In Box Cianci 1g Victory hood? Thing is so nice looking...unfortunate that it never even touched a vehicle. Would like to get it to a new home, but shipping is insane on such large freight.

[TurboSinceBirth]

Sorry to hear about all the problems and that things went so wrong on the rebuilds. After the initial issues, I was hoping your rebuilds would go smooth and you would have a killer stroker on your hands...but something about these cars, things just seem to get messy. Whatever direction you choose next, I wish you the best of luck. Dealing with the complications of a full build drove me to simplicity of a BPU type setup on a different platform.

Thanks Rob. I'm sure you didn't know all the problems that were occurring. After I had everything put together with the stroker and 5857 turbos the fact that the local machine shop incorrectly replaced the copper wire, a hail storm, a paint job, plus a body conversion all made me lose interest in the project. At that point after two years I just wanted to drive a 3S. I ended up parting most everything out evening selling the turbos and the DR T3 manifolds are being sold in a few weeks too so I can fun another parts car. All I have left is the stroker I put in a different non o-ringed block, SS built transfercase with new spool, tranny, and CFDS.

I ended up going back to a simple setup with a stock motor GT-368 Stealth setup similar to what your 93 had before you went with 3076R turbos. It's a fun street car I'll be improving it slowly as I go along hopefully focusing on making it handle better and deliver the power to the ground more efficiently before I decide to upgrade the motor and turbos, but we'll see. I can't stay away from these cars. I still love working on them and building them.

[2root4u]

Bump. Selling everything as a lot including all the stuff in the pictures, FMIC, and many other boxes I didn't go through yet. Does not include the hood. $400 picked up locally. Ashburn, VA.

[B.J.]

how much for the 3000gt service manuals shipped to 35126?

[Boomer3000]

Might see if my buddy in North Carolina will swing in and pick it all up :suspect: