PDA

View Full Version : Replacing Power Steering pressure Switch



mrbaseball
08-06-2011, 10:45 PM
The PS pressure switch on my 92 VR4 is always active and is giving me a high idle. I have a replacement, but im not sure how to get to the switch.

How do I get to the Power Steering Pressure switch to replace it? Would it cause problems if I unplug the wire going to the pressure switch?

Hans@GZP
08-07-2011, 10:20 AM
It may be already unplugged and grounding itself. But, no problem just unplugging it.

mrbaseball
08-07-2011, 06:34 PM
It may be already unplugged and grounding itself. But, no problem just unplugging it.

I unplugged the wire going to the ps pressure switch and now it's not active all the time. I also tested with a new plug/Harness and it also shows active all the time when plugged into the ps pressure switch.