View Full Version : Stock rear axles FTL
Broomfield Racing
07-31-2011, 09:14 PM
Went to Import Madness on Saturday at New England dragway. Entered in the 10.50 Pro Shootout class...cant go faster than 10.50. Did a couple 10.5X's @ 134. All on 24psi of boost. Got to the finals and popped a driver side axle like at NG :shake2:
Thing that sucks is after the finals I was gonna send it down the track.
Heres a time slip...I went half throttle about 200ft from the end since I knew it was going to eliminate me from competition if I stayed in it.
Loving the 60ft times with a 3500lb race weight.
Vids when friend uploads.
http://i37.photobucket.com/albums/e66/Mayhempics/c2c0cb91.jpg
Heres a qualifying run.
http://i37.photobucket.com/albums/e66/Mayhempics/0fb22215.jpg
green-lantern
07-31-2011, 10:14 PM
Time for Broomfield Racing to build axles? :suspect:
Nice run anyway Dave :)
Broomfield Racing
07-31-2011, 11:04 PM
Nah getting Rays 300m axles.
futurevr4man
08-01-2011, 10:32 AM
nice times, sick 60 foots!
AdamVR4
08-01-2011, 10:57 AM
Those are exactly the 60's I'm after. Glad to see I've got the right parts to get it done :)
Why are you bracket racing and limiting yourself to 10.50's when there's so much more in your car?
Broomfield Racing
08-01-2011, 11:03 AM
Those are exactly the 60's I'm after. Glad to see I've got the right parts to get it done :)
Why are you bracket racing and limiting yourself to 10.50's when there's so much more in your car?
Was a 10.50 shootout class not bracket racing. I didnt think I could compete in the unlimited class but I will try next time.
BigTyla
08-01-2011, 11:47 AM
Those are exactly the 60's I'm after. Glad to see I've got the right parts to get it done :)
Why are you bracket racing and limiting yourself to 10.50's when there's so much more in your car?
If he can consistently run 10.5x, why not?!?! :D
AdamVR4
08-01-2011, 12:54 PM
If he can consistently run 10.5x, why not?!?! :D
Because he might be able to consistently run 10.2's? ;)
lawdogg
08-01-2011, 01:21 PM
Nice work Dave!
Chris@Rvengeperformance
08-01-2011, 02:35 PM
very nice!
Your transfer case housing is sitting on a shelf, I'm still drooling over it.
Greg E
08-01-2011, 11:53 PM
Damn...
Curious. When these axles break, is it a torsion break from torquing a weak metal or a sheer snap from an extreme angle?
fullracegt
08-02-2011, 02:06 AM
i think they would break near the cv area but iv never broken rear axles before..so not sure
AdamVR4
08-02-2011, 12:40 PM
The last one I broke snapped inside the CV boot at the diff...
http://i26.photobucket.com/albums/c115/adamvr-4/boot-side.jpg
The fracture surface is basically flat with very little if any necking.
Per this (page 12): http://www.sut.ac.th/engineering/Metal/pdf/MechMet/10_Torsion%20test.pdf
It looks like a shear (ductile) failure due to torsional loading.
In my case at least, there's very little squat at launch, so I wouldn't expect the angle of the shaft to play a significant role in the failure.
Maximal
08-02-2011, 12:45 PM
Nice runs Dave...can't wait to see what that thing really has!
BigTyla
08-02-2011, 12:46 PM
The last one I broke snapped inside the CV boot at the diff...
http://i26.photobucket.com/albums/c115/adamvr-4/boot-side.jpg
The fracture surface is basically flat with very little if any necking.
Per this (page 12): http://www.sut.ac.th/engineering/Metal/pdf/MechMet/10_Torsion%20test.pdf
It looks like a shear (ductile) failure due to torsional loading.
In my case at least, there's very little squat at launch, so I wouldn't expect the angle of the shaft to play a significant role in the failure.
Ah, good 'ol Mechanics of Materials. I hated that class!
Looks like shear failure to me, too. Pretty clean break there.
DocWalt
08-02-2011, 01:14 PM
Sure looks like shear failure to me as well. I really doubt the angle of the shaft would have any bearing on the break, CV joints are there for a reason ;)
CoreyB
08-02-2011, 01:23 PM
Sorry I couldnt make it to the track Dave
Broomfield Racing
08-02-2011, 02:39 PM
Thank you Adam,
Yea its a very clean break...my previous axle was even cleaner than yours Adam. Ill take a picture of this one when I get it out.
http://i37.photobucket.com/albums/e66/Mayhempics/34e50166.jpg
AdamVR4
08-02-2011, 02:48 PM
300M vs stock:
http://i26.photobucket.com/albums/c115/adamvr-4/300maxlevsstock2.jpg
No surprise, they break where the diameter necks down.
shmoo
08-02-2011, 03:23 PM
awesome, congrats man!
very nice!
Your transfer case housing is sitting on a shelf, I'm still drooling over it.
send that housing on up here. i've got drooling scheduled, but no new drool ready toys.
_isiah
Broomfield Racing
08-02-2011, 03:28 PM
Poooooopra
http://www.youtube.com/watch?v=Q7t1GH6sY9g
Poooooopra
http://www.youtube.com/watch?v=Q7t1GH6sY9g
Wow...prettiest sight in here in a while.
BIG out of the hole - just beautiful!:w00t:
Gearheadvr4
08-02-2011, 08:15 PM
What kind of torque levels are you guys at to be breaking these?
AdamVR4
08-02-2011, 09:06 PM
What kind of torque levels are you guys at to be breaking these?
It doesn't take that much... Both of the ones I've broken have been the first pass of the night -- hardly going for broke... Maybe like 500-550 ft-lbs.
Ray Pampena
08-03-2011, 06:10 PM
get em while thier on the group buy!! if you plan on great 60ft times (more than just a few) youll need these
3000GT/Stealth International Message Center (http://www.3si.org/forum/f4/its-time-again-3rd-round-300m-rear-axle-group-buy-522145/)
i'm with adam. torque will snap anything; and at whatever the weakest point is.
i need to get me some of these axles for peace of mind--but i need to have my car working first.
shmoo
08-04-2011, 05:24 AM
^^awesome !
but that was a sick looking poopra..
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.