View Full Version : Need Help - What's this sound? (Video)
onebadmollafolla
07-28-2011, 10:51 PM
My car has had one of its lifters ticking for a while. Starting yesterday, it got much much worse it seems like. Well, if it is in fact a lifter. I checked the oil and I couldn't feel any metal flakes or anything out of the ordinary. However, as I said, this sound it is making is rather loud. I am not sure if I blew a lifter or if it is a rod starting to knock (which I really hope it is not). I pulled over today to record a short video with my phone hoping someone here might have some insight.
Thanks!
video-2011-07-28-20-34-02.mp4 video by SL3000gt - Photobucket (http://s157.photobucket.com/albums/t60/SL3000gt/?action=view¤t=video-2011-07-28-20-34-02.mp4)
CoopKill
07-28-2011, 11:21 PM
Sounds like bearing to me...
Hans@GZP
07-28-2011, 11:40 PM
sounds like the rod of knocks to me
mb3000
07-29-2011, 12:13 AM
My opinion is the same as those who have posted before me.
...start saving your pennies...
CoreyB
07-29-2011, 10:36 AM
New club member!! Although I wouldnt say that is a rod bearing definitively. Check the timing belt, make sure its not loose, it could be a collapsed hydrolic tensioner
onebadmollafolla
07-31-2011, 05:07 AM
Took off the valve cover today. It appears that when the lobes on the front cylinder (intake valves/lifter) go down it immediately makes the sound as I turned the motor over. I talked to a reputable source and he thought it was probably a collapsed lifter. There is still nothing that is sure as of yet, but I will keep everyone posted. Keeping my fingers crossed and hoping for the best but expecting the worst. I appreciate the input.
onebadmollafolla
08-04-2011, 01:51 AM
It went boom.
CoreyB
08-04-2011, 09:11 AM
Oh no, sorry to hear that man. Did it throw the rod and ruin the block?
CoopKill
08-04-2011, 01:40 PM
Sorry to hear!:(
onebadmollafolla
08-04-2011, 02:06 PM
Oh no, sorry to hear that man. Did it throw the rod and ruin the block?
I don't think it ruined the block. In fact, it may very well just be the top end. 100% sure it is done dealing though. Funny thing is it still holds oil pressure just like it should. :lol:
I will be getting rid of it and getting out of the 3S business for the time being though.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.