View Full Version : As required by owning these cars...
OBXBoost
09-16-2010, 08:58 AM
I'm looking for a new set of tall jack stands and a nice floor quick jack.
What do you use and do you like them?
ahkenaden
09-16-2010, 09:39 AM
Kwiklift :D
J-Groove
09-16-2010, 10:01 AM
I'm interested in this as well.
My current floor jack sucks as it maxes out with the wheels barley off of the ground. Doesn't leave me a lot of room to work as that is all of one notch on my jack stands.
-John
OBXBoost
09-16-2010, 10:11 AM
I want to be able to put my car up high on stands as when I leave for work, as my Jack Russell has to go in the garage while I'm not home and he has made a habit of jumping on my VR-4 and walking all over the hood and rear decklid. Needless to say, if it was up higher, he couldn't jump on it.
TonyM
09-16-2010, 10:16 AM
I bought this Omega about a year and a half ago. I had one of the garbage Craftsman aluminum racing jack. The cylinder failed on it about a month after the one year warranty and it costs more for a replacement cylinder than the $200 I wasted on the stupid jack.
After looking around at all the usual stores I came to the decision to drop some change on a badass jack and be done with it. Bought an Omega 29023 floor jack. Not quite as high end as a Walker or Norco but it's more than enough for my needs.
For you ultra low guys this is the one to have. The saddle gets down to about 2.75"!!!!! For 28" of reach the jack never goes above 4". I can fit the entire 36" of reach under my car without scraping anything.
http://img.photobucket.com/albums/v399/AJMatson/P3080174.jpg
http://img.photobucket.com/albums/v399/AJMatson/P3080175.jpg
http://img.photobucket.com/albums/v399/AJMatson/P3080179.jpg
http://img.photobucket.com/albums/v399/AJMatson/P3080180.jpg
Picked it up at All Tire Supply here in Houston.
Omega 2 Ton Low Profile Magic Service Jack (OME-29023): All Tire Supply Company (http://www.alltiresupply.com/p-OME-29023.html)
OBXBoost
09-16-2010, 10:23 AM
That does look nice! What about stands?
AF Twin Turbo
09-16-2010, 10:24 AM
I used to have the craftsman pro SUV jack stands. they were more expensive, but they had some decent height (not sure what the specs were). i'd go on the cheap and just try to find the highest stands you can. if i could afford it, i'd have a $12k hydraulic lift in my garage :)
J-Groove
09-16-2010, 12:11 PM
That looks awesome. $250 is a lot to drop for a jack, but it looks well worth it. Hello birthday present. haha
-John
skater334
09-16-2010, 12:14 PM
We use 4-ton stands, w/ a low pro jack from Sears, but we have 6-ton stands as well. They work great.
Atrosity
09-16-2010, 12:39 PM
I'd love to say fuck it and bolt a lift in my garage. That would be grand.
Austin@STM
09-16-2010, 02:49 PM
Craftsman Aluminum jack, its lightweight and very controllable and pumps up quickly. They are also very durable, we have used it to pick up the dyno and move it a couple times which is WAY over its weight limit, and it just keeps on kickin.
Also if your near a harbor freight, they have a set of aluminum jackstands that are very nice, they weigh nothing so they aren't a pain to move around and they look nice because they dont rust.
-Austin@STM
SUTHNR
09-16-2010, 03:11 PM
Harbor Freight is your friend. Can find a 20% off coupon in the back of many different mags. I get a new one each month in my Maxim. :D
EricB
Polygon
09-16-2010, 08:28 PM
I'd love to say fuck it and bolt a lift in my garage. That would be grand.
Eventually that's my goal. For now I use regular floor jacks but I really need some taller ones and a jack that can get the car up that high. It's just to cramped to do anything under either car. I also use ramps as well.
I have 2 x jacks that lift the car to 86cm & 4 x normal stands.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.