View Full Version : My budget radiator and oil cooler ducting
dodgers_fan
07-20-2011, 09:37 PM
Hello everybody.
So today i got around to finishing my sheet metal ducting, and i gotta say, for the couple of bucks i spent making this, it came out pretty good.
First things first i removed the bumper, lights, crash bar and start measuring and making templates out of cardboard. Then trace them to the sheets of sheet metal, next of course was to cut and test fit. End results were this.
http://tapatalk.com/mu/ad75435a-729d-9a7c.jpg
http://tapatalk.com/mu/ad75435a-72d0-7257.jpg
http://tapatalk.com/mu/ad75435a-72f8-46c8.jpg
http://tapatalk.com/mu/ad75435a-7335-6f1c.jpg
http://tapatalk.com/mu/ad75435a-7354-3f05.jpg
Eveything fit really tight againt the radiator so now the air will be forced through instead of slipping out the sides or on top.
The oil cooler duct was bought from home depot, ghetto but it looks very efficient. The part was a 12x6 dryer/heater vent.
http://tapatalk.com/mu/ad75435a-745a-0c52.jpg
http://tapatalk.com/mu/ad75435a-746d-c674.jpg
Now i need a logger to see if my temps cooled down a bit.
Thanks for viewing.
AdamVR4
07-21-2011, 12:52 AM
Ha! That vent appears to fit perfectly. Nice find. How's it look with the bumper on?
terrets
07-21-2011, 02:05 AM
Not bad. Ill be waiting on what it looks like with the bumper and your temps..
mb3000
07-21-2011, 02:21 AM
Subscribed.
nice! reminds me of using toilet gaskets for speaker mounts.
dodgers_fan
07-21-2011, 05:58 PM
The tubing on the vent slips right over the bumpers vent so its not very visable. For those of you with second gen 3kgt and 99 front ends then yours more than likely would be visable and have some extra space around the tubing.
http://tapatalk.com/mu/ad75435a-9135-e9ad.jpg
http://tapatalk.com/mu/ad75435a-91f9-d999.jpg
And as for the ducting around the radiator, its almost 100% invisable.
http://tapatalk.com/mu/ad75435a-9257-f05c.jpg
I will let you guys know what my temps are on friday when its going to be 90+ degrees outside.
Ps, after about a 6 mile drive today, i parked the car, popped the hood and i was able to hold the top of the radiator without burning my hand.
Gearheadvr4
07-22-2011, 02:26 AM
Nice work! I hear guys complain about radiator temps all the time and it's normally a simple inexpensive fix like this. Unless your radiator is rusted out or blocked with debris, then our cooling system works well. The stock fans pull a lot of air and even Ray is rocking the stock rad on his beast.
93STLTH
07-22-2011, 03:13 AM
Looks like a good idea, but I'm wondering if you're going to sacrifice airflow to the intake and to the rest of the engine. Cooling isn't just getting air through the radiator or every car would have ducting like that. Just something to keep in mind when you start testing this.
Primus101
07-22-2011, 04:02 AM
You do realize the bumper moves back if it gets hit, right?
& you might wanna check for puddles of oil under the car next time you bump into a curb....justsayin....looks pretty rigid, as in 'slice&dice' & non-crumple zone like plastic would be....
mb3000
07-22-2011, 04:06 AM
Bump into a curb?
dodgers_fan
07-22-2011, 05:57 AM
You do realize the bumper moves back if it gets hit, right?
& you might wanna check for puddles of oil under the car next time you bump into a curb....justsayin....looks pretty rigid, as in 'slice&dice' & non-crumple zone like plastic would be....
I do agree that its sorta slice and dice cause im limited on tools, all that were used were some cheap shears that i got from home depot.
The end of the vent that faces the oil cooler is rounded and not sharp plus its made of very thin and flexible aluminum which can and will flex/crumble very easily.
I find it highly unlikely that it will bump back far enough to tear an oil line but of course, there is a possibility.
dodgers_fan
07-22-2011, 06:01 AM
Looks like a good idea, but I'm wondering if you're going to sacrifice airflow to the intake and to the rest of the engine. Cooling isn't just getting air through the radiator or every car would have ducting like that. Just something to keep in mind when you start testing this.
Hmmm? Thats a good point, im going to have to check what my iat looks like tomorrow then ill update back here.
DrGonzo
07-22-2011, 02:11 PM
If you think about the way the stock ducting worked, there was plastic shaped almost the same way to force air into the radiator. The stock airbox pulled air from a little hose on the bottom that pulled air from under the fuse box/ABS motor. So as long as you don't mess with the airflow on the passenger side I don't think you'll have any issue with airflow to the intake.
TwIzTeD_3kGt
07-22-2011, 02:17 PM
You do realize the bumper moves back if it gets hit, right?
& you might wanna check for puddles of oil under the car next time you bump into a curb....justsayin....looks pretty rigid, as in 'slice&dice' & non-crumple zone like plastic would be....
The next time? Do you hit curbs often? 10 years of driving and I never have.
Checkered vr4
07-23-2011, 08:40 PM
You do realize the bumper moves back if it gets hit, right?
& you might wanna check for puddles of oil under the car next time you bump into a curb....justsayin....looks pretty rigid, as in 'slice&dice' & non-crumple zone like plastic would be....
do you park by feel?
do you park by feel?
only when i'm driving my penis.
terrets
07-23-2011, 09:35 PM
^hahaha nice.
dodgers_fan
07-26-2011, 07:54 PM
http://img.photobucket.com/albums/v230/AzNFLiPBoiPiNoY/3kGT/Jessie_TT/a4e2fa60.png (http://img.photobucket.com/albums/v230/AzNFLiPBoiPiNoY/3kGT/Jessie_TT/a4e2fa60.png)[/quote]
here is a nice little log put together by alan. it shows a small 2nd gear pull, temps were very consistant except for that little bump at the end of the rpm range, but even that cooled down right after the pull was done.
Jenkins
07-26-2011, 11:31 PM
Even though my ducting didnt come out as smooth as yours I can say I cruise 2deg. cooler then before.
bboyalan
07-27-2011, 12:30 AM
The rise in water temperature and underhood [IAT] temperature were +3* by the end of that pull. From what I can tell, the latter was previously 8* higher. TJ, your car actually runs about 4-7* cooler on average in comparison. Mind you, both of your guys' cars lack heat shields lol.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.