PDA

View Full Version : Just picked up a 91 GTO



J_Parker
07-17-2011, 10:22 PM
http://www.3sgto.org/members/j_parker/albums/91-gto/2938-img-0510.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/2939-img-0513.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/2937-img-0515.jpg

Overall it runs well, all it needs is a bit of tuning and maybe a wheel bearing or caliper (something is rubbing a little in the rear end) I dropped my Soarer on in and get to keep that as well until this one is reliably rolling again. It was a very fair trade in my opinion.

Granny
07-17-2011, 10:51 PM
Nice find!
Put the front bumper back original and get rid if the satellite antenna on the back.
Oh and new rims!
Everything else looks nice. :)

2fnloud
07-17-2011, 11:28 PM
I spy the rare muffler blank that covers the passenger muffler cut out when you switch to a single shot exhaust.

Granny
07-17-2011, 11:40 PM
I spy the rare muffler blank that covers the passenger muffler cut out when you switch to a single shot exhaust.

Is that aftermarket?

BTW..Love the new avatar!

Boomer3000
07-17-2011, 11:45 PM
Looks like alot of work lol.. I have faith in ya Parker. Good luck buddy!!!

vr4gto
07-17-2011, 11:55 PM
I spy the rare muffler blank that covers the passenger muffler cut out when you switch to a single shot exhaust.

Oooh, me want.

GTOJOE
07-18-2011, 12:37 AM
Good to see. LOL at the bonnet pins on a stock bonnet. Somehow the wheels almost suit the car.... almost!!

Gearheadvr4
07-18-2011, 01:00 AM
Needs some TLC to get it back to it's original glory and flick off the rice.

Nationalmilkman
07-18-2011, 01:11 AM
Side mirrors are aftermarket too

2fnloud
07-18-2011, 01:22 AM
Is that aftermarket?

BTW..Love the new avatar!

I can not remember but I think it is.

And thank you, my wife and I fooled around in one of those photo booths

Nationalmilkman
07-18-2011, 01:30 AM
The bumper delete panel is a Kaaz piece, rare and very hard to find!

J_Parker
07-18-2011, 02:31 AM
http://www.3sgto.org/members/j_parker/albums/91-gto/2941-img-0519.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/2940-img-0516.jpg

It's all coming the fuck out... I have no idea how to use ANY of the gizmos in there, so until I learn something about them the stock ECU can do the work.

There's a Greddy EBC that I'm not too savvy on.
Rev-speed meter (oblivious to what that even is... or what it does)
E-manage Blue not too sure how to tune it just yet.
and a few other things here and there that I have no knowledge on, so they'll be getting removed until I educate myself on them.

I have a lot of work to do, right now though, de-ricing is the last of my worries. I'm thinking of doing a Stealth conversion on it too BTW.

Gearheadvr4
07-18-2011, 04:56 AM
I'm thinking of doing a Stealth conversion on it too BTW.


Ok, you lost me there...

GTOX
07-18-2011, 05:12 AM
Bumper insert, mirrors and front bumper are all made by Kaze.

Maybe the 'Rev-speed meter' was some kind of speed cut defence against the 180km/h limiter?

IPD
07-18-2011, 08:54 AM
keep the front bumper. i liked it on predacon's car; and it works with the 1g's.

p.s.
if you're selling:
dibs on the side mirrors.
dibs on the wheels. what size? tri-force zelda's right?

Nationalmilkman
07-18-2011, 12:51 PM
RHD Stealth!!!! I want one SOOO bad!! Do it!!

Street_Chally73
07-18-2011, 09:53 PM
There's certainly some work involved, but congrats either way. It'll be interesting to follow this one along as it transforms into something very nice.

J_Parker
07-20-2011, 01:49 AM
Thanks for all the comments guys!

I was wondering if anyone had any experience with eManage blue? I want to just give it a base tune for now (getting the car running as if stock) so I can put it on the road after I figure out what's dragging in the bottom end... Still cant seem to pinpoint it :(

mb3000
07-20-2011, 01:51 AM
Elaborate on this dragging situation.

J_Parker
07-20-2011, 01:56 AM
Well, it's sort of like a scratching/squealing when it's under load, it seems to come on when I engage the clutch, but it works too well to be the clutch... Somtimes it sounds like it's coming from the rear end, other times it sounds like mid area right below.

mb3000
07-20-2011, 02:24 AM
Sounds like your leaning towards the driveline then?

J_Parker
07-21-2011, 02:26 AM
Drive-line it was... There was no fucking fluid in the transfer case... It seems to rotate still, and I'm going to drop some fluid in it tomorrow after work. Hopefully it'll hold out until I get a new one for it, as part of my peace of mind. Other than that I think everything else is in check. I still need a base tune on the eManage blue though, I haven't seen much of them for our cars...

GTOJOE
07-21-2011, 03:43 AM
I believe one of the Australian guys is setting up his GTO with an eManage Ultimate. Perhaps the maps are the same???

My small aussie build - Page 2 - 3000GT/Stealth International Message Center (http://www.3si.org/forum/f155/my-small-aussie-build-517690/index2.html)

FluffyCow
07-21-2011, 08:32 AM
Damn nice car... a tad rice.but.you're fixing it....

Every time I see a RHD car I want to try to get one...

J_Parker
07-22-2011, 12:30 AM
From what I know Joe the maps of the Ultimate are a whole different ballgame :( I'm going to be picking up a mini laptop after work tomorrow so I can give tuning this thing properly a crack.

The de-ricification is under way as we speak, I have the interior cleaned up and most of the uglies removed from it, just have to clean all the double sided sticky foam off the dash, then replace the white painted trims with the black ones out of my Stealth.

J_Parker
07-22-2011, 01:16 AM
Also, I should add that the transfercase seems to be all in good order. I dumped some fluid into it, took if for a rip and didn't get one squeak or squeal out of it!

CoreyB
07-22-2011, 08:40 AM
Nice J, Looking forward to seeing her done.

Boomer3000
07-22-2011, 05:43 PM
Remove that wing yet?

J_Parker
07-22-2011, 11:50 PM
Thanks guys, it's like being home again working on a running one :p

Still have the wing on the car Dustin, it'll have to stay for a little while longer. I don't have any plugs or anything of the likes to fill the holes leftover. I might just leave it on until I get it painted which will be sometime in the winter. One summer of rice never killed anyone haha.

Nationalmilkman
07-23-2011, 12:31 AM
Make it a Stealth!














Sorry.... I won't stop til I see the first RHD Stealth! Lol

Boomer3000
07-23-2011, 04:11 AM
Thanks guys, it's like being home again working on a running one :p

Still have the wing on the car Dustin, it'll have to stay for a little while longer. I don't have any plugs or anything of the likes to fill the holes leftover. I might just leave it on until I get it painted which will be sometime in the winter. One summer of rice never killed anyone haha.

Well if you think a 3000gt spoiler from an na would line up with the holes I have one I could ship ya...Just lmk and I can throw it in the mail.

j2k4
07-23-2011, 11:41 AM
I can not remember but I think it is.

And thank you, my wife and I fooled around in one of those photo booths

Are you trying very hard to tell us you're pregnant?


The bumper delete panel is a Kaaz piece, rare and very hard to find!

That thing must have scared the jebus out squirrels and chipmunks when they came out to see all the rice.

2fnloud
07-23-2011, 01:01 PM
Are you trying very hard to tell us you're pregnant?

Oh no, we are three and done. This .3 child needs to play also ;)

J_Parker
07-23-2011, 04:35 PM
Are you trying very hard to tell us you're pregnant?



That thing must have scared the jebus out squirrels and chipmunks when they came out to see all the rice.

Hey now, be nice to my rice! :p Its going to take a massive transformation after this winter, and it's nothing overly dramatic. The wing isn't all too overplayed, it's almost growing on me lol. The bumper, mirrors and steering wheel HAVE to go!!!

IPD
07-23-2011, 05:30 PM
dibs on the mirrors.

J_Parker
07-24-2011, 01:59 AM
Got 'er going guys! And I must say... It is one fast ricey machine, I think it may even be quicker than my Stealth was :D

I did a wipe on the eManage, and rough tuned it with the dials on the side, it seems to run smooth and have loads of power.

It's got a set of 19t's, Greddy EBC, 650cc injectors, and the eManage for now. Once I know it's reliable... The de-ricing takes full effect.

J_Parker
07-24-2011, 02:08 AM
dibs on the mirrors.

Yes Thadd, I'll send you all of the Kaze pieces when I get under way :p

Street_Chally73
07-24-2011, 03:31 AM
It's good to hear you got it running well now...Once you "free willy", it should be a nice ride to compliment your Stealth. BTW: you'll have to do something wild to your Stealth to make it faster than the GTO 'cause after all, everybody should already know that Stealths>3000GT's, lol! ;)

J_Parker
07-24-2011, 04:58 PM
I'm not doing anything with the Stealth now lol, the GTO is going to become the Stealth over the course of the winter :D

Here's what she's looking like now without the ugly Zeldas :p
http://www.3sgto.org/members/j_parker/albums/91-gto/2989-img-0531.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/2990-img-0532.jpg

Ughh... It's such a shame that I can't drive it without the bumper on... It looks so mean without it!!

J_Parker
07-24-2011, 05:06 PM
Well if you think a 3000gt spoiler from an na would line up with the holes I have one I could ship ya...Just lmk and I can throw it in the mail.

I don't think it'll fit man :( the holes are a little too narrow and a bit too much in depth. When I do my Stealth conversion though, I'm just going to throw the whole hatch on. Thanks though bud, I appreciate it!

If anyone has a 2G steering wheel though, I'd be happy to eventually take it off their hands. I'm not much of a MOMO wheel fan.

IPD
07-24-2011, 05:30 PM
damn you! what size are the zeldas? i want a set!

J_Parker
07-24-2011, 06:55 PM
damn you! what size are the zeldas? i want a set!

Lol, they're 18's man.

IPD
07-24-2011, 08:37 PM
Lol, they're 18's man.

18xwhat? will they fit over 2g vr4 brakes?

J_Parker
07-24-2011, 11:22 PM
18xwhat? will they fit over 2g vr4 brakes?

No, they need spacers.

Okay, so... I'm having another problem.... Intermediately the car starts so sputter down to what seems like running on three cylinders. Also the fuel pump is screaming like mad! The sound of the pump sort of builds up, then once it reaches it's full volume the CEL comes on... I think the emanage needs to go... It seems to be the source of a lot of problems... Also. The car ran great when I put a good MFI in from my stealth, I think the emanage is causing something to pop.

IPD
07-24-2011, 11:32 PM
seriously, though i do want some tri-spokes.

have you tried swapping pumps with your stealth?

J_Parker
07-25-2011, 07:06 PM
I'll look into seeing how much shipping would be for them. I'll let 'em go for $250 if you want them man.


Well, I was hoping to get it running with the eManage, but I just don't have the means to do it right now, my logger got ruined and I haven't got a laptop until Thursday. So I ripped it out and am running waste gate boost on the stock ECU, I was expecting a lame boring ass outcome, but apparently it doesn't have stock waste gates on it anymore. I hit a clean steady 15psi, I think as it stands I'll just keep it at this and stock the parts left over for other things later on down the road.

IPD
07-25-2011, 07:15 PM
are they manual or electric mirrors? do they cover the old mount locations, or do i need to do something else to cover that?

J_Parker
07-25-2011, 08:09 PM
Electric I believe, they have the three wires protruding from the mounting locations. but I don't think they're hooked up in my car right now. For the stock mirror holes, They were welded and filled on this car. I see no trace of any hole ever being there.

J_Parker
07-25-2011, 10:36 PM
Well... I need a damn t-case, that was what was on the plug. It couldn't hold anymore, the oil that came out looked like Crayola's glitter glue. The car is still mobile, however I'm not liking driving on that t-case, I don't need to take anything else out with it. Hopefully when I order a new one next week 3SX can have it to me within the week... Hopefully...

http://www.3sgto.org/members/j_parker/albums/91-gto/2996-img-0550.jpg

Danube_3KGT
07-26-2011, 03:03 AM
send me the front bumper and ill do a poll on what way to destroy it..

IPD
07-26-2011, 08:08 AM
send me the front bumper and ill do a poll on what way to destroy it..

FAIL. regardless of how much any of you personally may dislike it; that's genuine kaze--and it's worth some bones. seriously, try importing one from japan and prepare to be shocked.

it's a definite "sell" item. if you want to take a hammer to something that's garbage, there's plenty of "vader" and "shogun" bumpers out there--not to mention the shitty bomex ones.

IPD
07-26-2011, 08:31 AM
Electric I believe, they have the three wires protruding from the mounting locations. but I don't think they're hooked up in my car right now. For the stock mirror holes, They were welded and filled on this car. I see no trace of any hole ever being there.

would it be possible to test it to verify if it works with the stock mirror control? if so, i'll go ahead and get them.

ntcmpjg
07-26-2011, 01:14 PM
Can you find me a 91 GTO up there in Canada. I always wanted a RHD car plus it's over 20 years old so Florida will let me register it


Sent from my iPhone using Tapatalk

J_Parker
07-26-2011, 08:25 PM
I'll take a look for you Jeff, I might even be contemplating selling this one, picking up a beater, and just finishing my Stealth for now...

I'll get back to you on them Thadd, I still need something to see down the sides of my car for now lol.

I may not like the bumper personally, but they are hard as hell to find, and some people like them. I'm not going to destroy it, I'll sell it to someone whose taste it fits and do my own thing, along with the wing...

ntcmpjg
07-29-2011, 09:12 PM
I want an NA I'm not looking for the problems that come with the TT I like to build show cars.


Sent from my iPhone using Tapatalk

J_Parker
07-29-2011, 11:46 PM
I want an NA I'm not looking for the problems that come with the TT I like to build show cars.


Sent from my iPhone using Tapatalk

Ahhh, okay. Finding an N/A GTO is near to impossible though. Seeing as they need to be imported the majority is seeking the TT. But if I do run across one for sale you'll be the first to know.

J_Parker
10-03-2011, 10:29 PM
It's been a while since I've actually updated this thread. Here is the most recent work done to the car. Excuse the red/white scheme, the car WILL be getting painted either back to red with the white stripes, or gloss black. I haven't quite decided yet.

http://www.3sgto.org/members/j_parker/albums/91-gto/3043-img-0606.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3181-img-0671.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3179-img-0665.jpg

Believe it or not, I can actually see every one of those gauges with zero problems, so it stays. I worked too hard on it not to use it.
http://www.3sgto.org/members/j_parker/albums/91-gto/3180-img-0672.jpg

I've also fitted my custom bumper to the car and rendered it in all red, this is likely the path that I will be taking with it.
http://www.3sgto.org/members/j_parker/albums/custom-1991-1993-3-s-bumper/3258-img-0726.jpg

As it sits, it's a Stealthubishi. With Stealth sails, wing, and headlights. Mitsubishi skirts, rear bumper and tails. And of course my custom made bumper (Should be done soon)

IPD
10-04-2011, 07:22 AM
still got money waiting when you have the time. :)

J_Parker
10-04-2011, 08:28 PM
still got money waiting when you have the time. :)

I might actually be able to ship them out on Friday, or Monday man. I'll shoot you a PM when I know for sure :)

J_Parker
12-23-2011, 03:00 AM
Well... I finally bit the bullet and put a Stealth rear end on my GTO :)

http://www.3sgto.org/members/j_parker/albums/91-gto/3607-img-1041.jpg

IPD
01-01-2012, 11:44 AM
thanks again for the mirrors, parker! did you finally sell the wheels, bumper, etc?

J_Parker
01-01-2012, 03:43 PM
No problem man, sorry again that I couldn't have them out to you sooner. I sold the wheels a while back to a friend, my dad wanted them out of his shop asap. I still have the bumper, exhaust blank, and the silly spoiler to get rid of :p

IPD
01-01-2012, 08:10 PM
don't forget to leave trader rating. :)

J_Parker
01-06-2012, 06:50 AM
Here's what I've been up to lately :)

http://www.3sgto.org/members/j_parker/albums/91-gto/3630-img-1071.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3631-img-1075.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3632-img-1089.jpg

GTOJOE
01-06-2012, 07:03 AM
I'll send you my address so you can send them over to me when your finished :p

CoreyB
01-06-2012, 10:27 AM
Looking good man.

J_Parker
01-07-2012, 07:11 AM
Lol, thanks guys, here is a few more odds and ends I just got done. It's starting to come together nicely. I think today when I get off work I'm going to start stripping the paint off the heads and doing those, along with a few spots I need to touch up.

http://www.3sgto.org/members/j_parker/albums/91-gto/3633-img-1099.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3634-img-1097.jpg

j2k4
01-07-2012, 02:23 PM
Lol, thanks guys, here is a few more odds and ends I just got done. It's starting to come together nicely. I think today when I get off work I'm going to start stripping the paint off the heads and doing those, along with a few spots I need to touch up.

http://www.3sgto.org/members/j_parker/albums/91-gto/3633-img-1099.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3634-img-1097.jpg

So - was I right? :)

J_Parker
01-07-2012, 07:05 PM
So - was I right? :)

Were you ever wrong? : p

Honestly, you lost me lol.

j2k4
01-08-2012, 01:18 PM
So - was I right? :)


Were you ever wrong? : p

Honestly, you lost me lol.

I told you the result would be worth it - in chat, I think.

J_Parker
01-10-2012, 12:18 AM
Finally got all of that damn paint off the valve cover and started making it pretty too :)

For those of you wanting an easy way of getting that "Rhino Liner" off... Spray something slow burning on it and light the thing on fire, it worked like a charm and only took ten minutes. All I had to do was blow it off with the air line when the fire went out.

http://www.3sgto.org/members/j_parker/albums/91-gto/3634-img-1097.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3641-img-1104.jpg



I told you the result would be worth it - in chat, I think.

I think it may have been on Facebook?

2fnloud
01-10-2012, 01:04 AM
nope, it was in Chat, I remember reading it. BTW looks sweet!! Did you grind your plenum smooth before polishing it?

J_Parker
01-10-2012, 01:19 AM
nope, it was in Chat, I remember reading it. BTW looks sweet!! Did you grind your plenum smooth before polishing it?

Perhaps I logged off before I read the feedback :p

Thanks man, no I used a little mouse sander from 80, up to 200 grit. I had used a grinder with a sanding wheel on it to take away most of the harsh edges, it was a major pain in the ass trying to sand out the tool marks from it. But I got most of them out eventually. None of the things I've done are perfect, but when they're all together you cant see the imperfections unless you have your nose up to it, there's just too much going on to notice them :)

J_Parker
01-10-2012, 01:49 AM
Also, does everyone think I should go ahead and polish the heads too, or just keep them orange? I'm going to be putting a polished brass plug cover on there too.,..

J_Parker
01-14-2012, 01:01 AM
Polished the heads... And damn do they look good! :D

http://www.3sgto.org/members/j_parker/albums/91-gto/3656-img-1120.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3655-img-1118.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3654-img-1122.jpg

J_Parker
02-24-2012, 11:02 PM
I got around to doing some things to the car the past little while, here they are.

After a long battle of wiring and fitting I finally got everything back into the car and operational.
http://www.3sgto.org/members/j_parker/albums/91-gto/3741-dscf1180-2.jpg

I also got everything all polished up and ready to go into the car. It's looking stunning, however I'm still waiting on a chunk of brass to make the polished plug cover, hopefully I can get it soon :)
http://www.3sgto.org/members/j_parker/albums/91-gto/3770-dscf1237-2.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3771-dscf1238-2.jpg

Valhallaz
02-25-2012, 11:35 AM
http://www.3sgto.org/members/j_parker/albums/91-gto/3770-dscf1237-2.jpg
http://www.3sgto.org/members/j_parker/albums/91-gto/3771-dscf1238-2.jpg

Absolutely beautiful.

Glad I'm not going to be the one keeping it that way. :p

J_Parker
02-25-2012, 07:40 PM
Absolutely beautiful.

Glad I'm not going to be the one keeping it that way. :p

Well, by the time I'm done, seeing this thing on the road will be a rare occurrence lol. I don't want to have to go through all the effort to keep things clean and shiny every week.

I have about 80 sq/ft of the 3M Di-Noc carbon fiber film on the way to put over the top of either all of the red, or all of the white on the car soon. I'm hoping I can pull it off nicely and make the car look good again :)