View Full Version : New Product Ideas?
MeTarzan
07-10-2011, 12:32 AM
OK so Im starting to work on a few new projects with a good friend of mine (owner of Frontline Fabrications) for our platform. And want to get an idea of what some of the 3S community would really like us to have that we either dont have readily available or really need improvement on.
A couple of the things I have on my list are
- a stock location bolt in Fuel cell
- completely redesigned intake manifold (will be a single piece)
- single turbo kit
things you have you all have suggested
- Tubular Subframe
-Tubular Control arms
-solid subframe bushings
FeaRpb
07-10-2011, 01:55 AM
A stock location bolt in fuel cell would be awesome. Tubular subframes would be nice too.
stealthee
07-10-2011, 01:57 AM
On the note of subframes, solid subframe bushings (front)
On the note of tubular, tubular control arms.
i3igpete
07-10-2011, 03:02 AM
yes, make NEW parts like subframes and control arms. we already have enough single turbo kits and intake plenums that nobody buys.
FeaRpb
07-10-2011, 05:01 PM
yes, make NEW parts like subframes and control arms. we already have enough single turbo kits and intake plenums that nobody buys.
+1
Light Weight products would be nice too
Patryn
07-10-2011, 05:05 PM
Think an aluminum short-block would be to far fetched? Yeah, I know never gonna happen, but would be interesting to see, to say the least.
a zesty intake plenum would sell like hotcakes; and i'd be first in line.
p.s.
is this limited to metal fabrication--or does it cover a wide variety of stuff? i could see genuine exact-replica 96 bananas selling like hotcakes too.
AdamVR4
07-10-2011, 05:13 PM
a zesty intake plenum would sell like hotcakes; and i'd be first in
I'm with Pete. You'd probably be the only person in line.
futurevr4man
07-10-2011, 05:14 PM
a 1st gen lip is what all the 1st gen people would want. exhausts sell well too if you can stay under $300
MADMarc
07-10-2011, 05:16 PM
This one might sound a bit lame but how about some aluminum underbody splash guards that have a depression in the front for those of us w/front mounts? (1g idea)
For instance, something that I can slap on there (the fewer the pieces the better but shipping would be a pita) without it conflicting w/my front mount. Better yet, splash guards that double as an air channel to the fmic and rad? :)
Intercooler Install :: 2010-03-2695181906.jpg picture by MADMarc - Photobucket (http://s6.photobucket.com/albums/y214/MADMarc/Intercooler%20Install/?action=view¤t=2010-03-2695181906.jpg&newest=1)
2fnloud
07-10-2011, 05:22 PM
better gears for the 6sp T/C!
i3igpete
07-10-2011, 05:35 PM
There are like 5 companies in the entire country that can manufacture helical gears, just FYI... hope you plan on buying 50,000 of them.
2fnloud
07-10-2011, 05:38 PM
Didn't know that. I heard a member say that they might look into developing said gears, I give him street credit, because that member has released some impressive billet stuff already.
If helical gears are indeed THAT difficult to manufacture, then maybe it will never happen.
I'm with Pete. You'd probably be the only person in line.
really? so a small form-factor plenum with easy access to the rear head isn't something of interest for anyone besides me? well fuck me sideways. and here i thought that "cleaning up the bay" & being able to run a shorter length of IC pipe to the plenum would be a great thing.
ah, what the fuck does it matter anyway? companies who "ask" usually never deliver anything--requested or not (no offense to the OP).
JasonY
07-10-2011, 07:52 PM
Yeah, its probably not gonna happen, i spoke with Dave a lot about it, if it did happen, your looking at 3-5k for a pair of gears since youd almost have to bribe them into cutting them for you and even then the answer will probably be, "no"
Jason
i3igpete
07-10-2011, 08:33 PM
really? so a small form-factor plenum with easy access to the rear head isn't something of interest for anyone besides me? well fuck me sideways. and here i thought that "cleaning up the bay" & being able to run a shorter length of IC pipe to the plenum would be a great thing.
we already have the ebay plenum and the supermac plenums that both allow rear spark plug access. again, parts that are already available but nobody buys.
we already have the ebay plenum and the supermac plenums that both allow rear spark plug access. again, parts that are already available but nobody buys.
both of which are fugly as shit. i'd like something sleek in my engine bay; not a giant box of fail.
Chris GTO TT
07-10-2011, 09:08 PM
How about some subframe connectors. This chassis is limp as a wet noodles and some extra bracing could do some good
J. Fast
07-10-2011, 09:17 PM
How about some really simple things that people will buy for sure.
1) Bolt on seat brackets for various aftermarket seats that can be made so they bolt right in
2) Removable 4 point roll cage that's posted behind the driver and passenger and bolts to the shock towers that will accomodate a 4 point over the shoulder seatbelt. Give an option for a 6 point with removable door bars?
2fnloud
07-10-2011, 09:29 PM
Yeah, its probably not gonna happen, i spoke with Dave a lot about it, if it did happen, your looking at 3-5k for a pair of gears since youd almost have to bribe them into cutting them for you and even then the answer will probably be, "no"
Jason
He spoke of this after the NG
JasonY
07-10-2011, 09:33 PM
I know, and i was one of the biggest behind the scene voices of getting them made which is partly why hes still talking about it. If they can be made for 2500-ish id buy them. hard part is proving they are better to justify that kind of cost. If i dropped 3k to 3500 into my TC id want it to never break, ever no matter how much power i was making....
Jason
2fnloud
07-10-2011, 09:35 PM
Just having them made out from a stronger steel would be a starting point.
JasonY
07-10-2011, 09:44 PM
Yes, but even being able to get them made at all will be a great starting point, since thats the biggest problem. Production costs will be 80% of the final cost, so they will need to be made from the absolute best possible material bar-none since material costs will be fairly small in relation to final costs...
Jason
dpartinvr4
07-10-2011, 10:06 PM
really? so a small form-factor plenum with easy access to the rear head isn't something of interest for anyone besides me? well fuck me sideways. and here i thought that "cleaning up the bay" & being able to run a shorter length of IC pipe to the plenum would be a great thing.
ah, what the fuck does it matter anyway? companies who "ask" usually never deliver anything--requested or not (no offense to the OP).
how about a twin throttle body intake...lol R.I.P. steve68
how about a twin throttle body intake...lol R.I.P. steve68
lol! but if you were going to do it "TRUE" steve68 style, you'd have to make it out of a half dozen toilet paper tubes & some duct tape. :)
95gto
07-11-2011, 03:52 PM
really? so a small form-factor plenum with easy access to the rear head isn't something of interest for anyone besides me? well fuck me sideways. and here i thought that "cleaning up the bay" & being able to run a shorter length of IC pipe to the plenum would be a great thing.
ah, what the fuck does it matter anyway? companies who "ask" usually never deliver anything--requested or not (no offense to the OP).
The performance implications of short runners is the biggest issue with an intake like that. Peak torque at a low rpm is much move valuable than the 10 minutes it takes to pull a plenum to do a set of spark plugs.
I think getting some bushing options for these cars would be nice.
FeaRpb
07-11-2011, 04:17 PM
Some billet bushings would be nice
familyMAN
07-11-2011, 09:55 PM
How about some really simple things that people will buy for sure.
1) Bolt on seat brackets for various aftermarket seats that can be made so they bolt right in
2) Removable 4 point roll cage that's posted behind the driver and passenger and bolts to the shock towers that will accomodate a 4 point over the shoulder seatbelt. Give an option for a 6 point with removable door bars?
I like both of these. Especially if the seat bracket keeps the seats ultra-low.
These threads never produce results though...
lparrill
07-11-2011, 10:55 PM
How about some really simple things that people will buy for sure.
1) Bolt on seat brackets for various aftermarket seats that can be made so they bolt right in
2) Removable 4 point roll cage that's posted behind the driver and passenger and bolts to the shock towers that will accomodate a 4 point over the shoulder seatbelt. Give an option for a 6 point with removable door bars?
Great idea! I'm sure there would be a good demand
Gearhead
07-12-2011, 01:21 AM
How about some really simple things that people will buy for sure.
1) Bolt on seat brackets for various aftermarket seats that can be made so they bolt right in
2) Removable 4 point roll cage that's posted behind the driver and passenger and bolts to the shock towers that will accomodate a 4 point over the shoulder seatbelt. Give an option for a 6 point with removable door bars?
I'd buy both.
this just popped into my head:
how about a new design of front AWD knuckles? make them so that we can bolt-up evo brakes; also make them so that the caliper mounts on the cabin-side of the front wheel, instead of the bumper side (which is OEM location). this way we get a LOT more brake options, and we also get a slight benefit from weight relocation.
aaronatstate
07-12-2011, 12:40 PM
this just popped into my head:
how about a new design of front AWD knuckles? make them so that we can bolt-up evo brakes; also make them so that the caliper mounts on the cabin-side of the front wheel, instead of the bumper side (which is OEM location). this way we get a LOT more brake options, and we also get a slight benefit from weight relocation.
1. Why redesign the knuckle, when you can just design a bracket?
2. How does mounting the brake caliper on the rear side of the hub open up more brake options?
you could just design a bracket; and that's another viable option. the benefit of moving the caliper isn't opening up more options; it's in relocating the weight inboard. there's a reason why corvettes have their calipers inboard (as do many sports cars these days). again, not a massive benefit, but it is unsprung weight...
aaronatstate
07-12-2011, 12:54 PM
this just popped into my head:
how about a new design of front AWD knuckles? make them so that we can bolt-up evo brakes; also make them so that the caliper mounts on the cabin-side of the front wheel, instead of the bumper side (which is OEM location). this way we get a LOT more brake options, and we also get a slight benefit from weight relocation.
you could just design a bracket; and that's another viable option. the benefit of moving the caliper isn't opening up more options; it's in relocating the weight inboard. there's a reason why corvettes have their calipers inboard (as do many sports cars these days). again, not a massive benefit, but it is unsprung weight...
Then why did you say so?
mb7050
07-12-2011, 12:54 PM
brackets for evo x brakes
AdamVR4
07-12-2011, 01:00 PM
I like both of these. Especially if the seat bracket keeps the seats ultra-low.
These threads never produce results though...
I agree. I'd buy a set of seat brackets...
Then why did you say so?
i listed two ideas:
1. evo brakes bolt up
2. relocates calipers inboard
i listed two benefits:
1. more brake options
2. improved weight balance/distribution
#1's correspond to each other. #2's correspond to each other.
again, #1 could be offered with just a bracket--but it wouldn't relocate the brakes to the trailing edge of the front wheels.
i3igpete
07-12-2011, 01:21 PM
I'm pretty sure we're well past what a typical fab shop can make...
mb7050
07-12-2011, 01:39 PM
http://www.ravspeconline.com/shop/catalog/images/GTS-SUS-1032.jpg
http://jdmengineimports.com/img/8778.gif
[http://jdmengineimports.com/img/8780.gif
http://www.hptmotorsports.com/prodimages/GTS-SUS-1131LG.jpg
chassis reinforcement parts I hate the front end wobble in my spyder rear is ridig but the front needs some work . problem is the shock tower flex and flex underneath
http://img.photobucket.com/albums/v461/parsonsnose/eng1.jpg
like that but more ridig with multible connection points on the firewall
http://wp-content.rpmware.com/wp-content/uploads/2010/10/PW-JDM-Evo-X-Strut-Bar-580x273.jpg
just a thought ie:
http://img10.imageshack.us/img10/3122/saddasdafgggfgggggggggg.jpg
HLxDrummer
07-12-2011, 01:50 PM
Seat brackets (that are strong and safe!) and bushings!
Chris GTO TT
07-13-2011, 01:14 AM
http://www.ravspeconline.com/shop/catalog/images/GTS-SUS-1032.jpg
http://jdmengineimports.com/img/8778.gif
[http://jdmengineimports.com/img/8780.gif
http://www.hptmotorsports.com/prodimages/GTS-SUS-1131LG.jpg
chassis reinforcement parts I hate the front end wobble in my spyder rear is ridig but the front needs some work . problem is the shock tower flex and flex underneath
http://img.photobucket.com/albums/v461/parsonsnose/eng1.jpg
like that but more ridig with multible connection points on the firewall
http://wp-content.rpmware.com/wp-content/uploads/2010/10/PW-JDM-Evo-X-Strut-Bar-580x273.jpg
just a thought ie:
http://img10.imageshack.us/img10/3122/saddasdafgggfgggggggggg.jpg
This is what i want too
familyMAN
07-13-2011, 02:22 AM
I think we scared off the OP already
:WhiteFlag:
DuTTch
07-13-2011, 02:59 AM
OK so Im starting to work on a few new projects with a good friend of mine (owner of Frontline Fabrications) for our platform. And want to get an idea of what some of the 3S community would really like us to have that we either dont have readily available or really need improvement on.
A couple of the things I have on my list are
- a stock location bolt in Fuel cell
- completely redesigned intake manifold (will be a single piece)
- single turbo kit
things you have you all have suggested
- Tubular Subframe
-Tubular Control arms
-solid subframe bushings
I would like to see polished stainless steel one piece front heat shield covers
mb7050
07-13-2011, 10:21 AM
^I would buy one
MeTarzan
07-15-2011, 09:21 PM
I think we scared off the OP already
:WhiteFlag:
Definatly not scared away just busy...
I know I havent posted on here much or on the other site (uhhm) in a while. But I am planning on making the parts that I originally listed for my car. And if people are interested in them or others then we will jig them up to reproduce. I have seen things that are available and don't like the look at all. As well my friend is a perfectionist so if we make it it will be right.
A few of the things listed will be out of our production capacity Im sure. All things that we are looking at making are Metal Fabrication.
Like I said the name of the shop is Frontline Fabracation, currently he builds parts primarily for DSM's he is the first and only person to design a replacement rear diff cover that tends to blow up on high hp dsm's his will hold a couple tons of pressure on the press so its not going anywhere. He also is the only person to make bolt in fuel cells for the DSM's that retain the stock filler neck with a remote rollover valve to let it pass track tech.
some examples of his stuff:
http://www.frontlinefabrication.com/sites/default/files/Black-Non-Girdled-2g-cover_1.jpg
http://www.frontlinefabrication.com/sites/default/files/2g-fuel-cell-3_0.jpg
http://www.frontlinefabrication.com/sites/default/files/2g-fuel-cell-4_0.jpg
mb7050
08-10-2011, 09:25 AM
brake caliper adapters for the (350mm) (v10 touareg/cayenne turbo/Q7 ) 6 piston calipers to use with evo x rotors.
http://i144.photobucket.com/albums/r184/merajakhan/IMG_2286.jpg
http://www.3sgto.org/f17/cayenne-touareg-q7-bbk-upgrade-product-idea-5986.html
MeTarzan
10-19-2011, 08:44 PM
wow how time flys...we've been tied up on some dsm and subaru products so nothings really been done since the garags is full and my car cant get into the shop to get started on anything. One good thing is that we have a Mill on the way and will be able to start doing billet products as well aside from the flat metal and tube designed items that we had been limited to prior. Any other ideas guys??
Chris GTO TT
10-19-2011, 10:08 PM
What do you have for Subarus :suspect:
vr4tune
10-20-2011, 02:51 AM
http://img.photobucket.com/albums/v461/parsonsnose/eng1.jpg
Sell me your pit road m strut tower brace.
mb7050
10-20-2011, 07:53 AM
-water/meth tank that fits under the trunk floor.
-
2fnloud
10-20-2011, 08:05 AM
http://img.photobucket.com/albums/v461/parsonsnose/eng1.jpg
Start making a pit road m style strut tower brace.
Fixed.
mb3000
10-20-2011, 09:15 AM
Custom water/meth tank that replaces the cargo compartment on the passenger side, above fuel pump assembly.
i3igpete
10-20-2011, 10:27 AM
Fixed.
why do people always keep wanting the same parts to be made over and over, even when they're already on the market but nobody buys them so they're just sitting on shelves?
2fnloud
10-20-2011, 11:14 AM
why do people always keep wanting the same parts to be made over and over, even when they're already on the market but nobody buys them so they're just sitting on shelves?
actually I would want to see the area that mounts to the fire wall more centered.
Plus cheaper shipping fees.
And finally is this still being made and sold?
i3igpete
10-20-2011, 11:32 AM
so, by making it more centered, you make the bar uninstallable for people with the stock solenoids?
and yes, they had a blowout a few months ago but nobody bought them. probably still sitting on a shelf.
2fnloud
10-20-2011, 12:38 PM
Missed the blow out then. Also keep the drivers side at its location. Have the passenger side mount in the same location.
happen to have a link to the sale?
markoverclock
10-20-2011, 06:28 PM
How about some really simple things that people will buy for sure.
1) Bolt on seat brackets for various aftermarket seats that can be made so they bolt right in
2) Removable 4 point roll cage that's posted behind the driver and passenger and bolts to the shock towers that will accomodate a 4 point over the shoulder seatbelt. Give an option for a 6 point with removable door bars?
i would deff be interested in that, i think i might have to make for myself!!
familyMAN
10-20-2011, 08:46 PM
i would deff be interested in that, i think i might have to make for myself!!
1. Seat rails that keep aftermarket seat as low as possible for us folks that are not vertically challenged would be great!
2. Bolt in 4 or 6 pt. Yes please!
vr4tune
10-21-2011, 01:24 AM
so, by making it more centered, you make the bar uninstallable for people with the stock solenoids?
and yes, they had a blowout a few months ago but nobody bought them. probably still sitting on a shelf.
Who had a blow out on the pit road m brace? I would have jumped on that in a heartbeat. Does anybody deal pit road m in the stats any more? I know 3sx did as as well as Gtpro and ralliart from the other forum. As of right now I don't know of anyone who does.
J. Fast
10-21-2011, 08:49 AM
1. Seat rails that keep aftermarket seat as low as possible for us folks that are not vertically challenged would be great!
There's lots of room avail if you install fixed seat brackets and put a speed hub on the steering wheel to remove it. My seat is 1" off the uppper floor and I can fit a grapefruit over my head with a helmut on. Plenty safe to drive with a roll bar when you have room like that, a good seat, and restraints.
markoverclock
10-21-2011, 02:30 PM
1. Seat rails that keep aftermarket seat as low as possible for us folks that are not vertically challenged would be great!
2. Bolt in 4 or 6 pt. Yes please!
bolt in and removeable cage is what i was refering too. as my car will get kicked off track.
AdamVR4
10-21-2011, 03:18 PM
I think at some point in this thread I asked for aftermarket seat brackets that were a simple bolt-in design. I'm still interested ;)
markoverclock
10-21-2011, 08:00 PM
the problem with seat brackets is you have to have those exact seats for mock up. I don't have any aftermarket ones in my car yet. also everyone wouuld need slider set up due to different leg length of the driver.
The cage i will be building this winter around January. As by then i will have gotten kicked off track. But i also want to make it easily removable for street racing. If you have a cage or slicks no one wants to run with you.
familyMAN
10-21-2011, 08:06 PM
PM info about the cage you are building. If you are interested in building two, I may be in.
FeaRpb
10-21-2011, 08:53 PM
I am interested in the cage also Mark.
mb3000
10-21-2011, 11:51 PM
Easily removable bolt in cage?
:awesome:
markoverclock
10-25-2011, 07:32 PM
yes easily removable, but the inital install will have weld in plates. but after that you will bolt into those. so you wont have to remove the weld in plates. i need to look over the rule book before i start it. But that is a given.
This way you would be able to remove it, for street racing. bolt it in for the tracks that make you.
And of course it will all be tig welded. what about stainless steel instead of cromoly or mild steel. If we go that route we dont have to have them coated. and we can use smaller wall thickness as per rule book.
bluzvr4
10-25-2011, 07:49 PM
i also like the idea of a removable cage. could this be available for a dsm too?
FeaRpb
10-25-2011, 07:56 PM
I am liking it.
markoverclock
10-25-2011, 08:12 PM
i also like the idea of a removable cage. could this be available for a dsm too?
if you can get enough cars available like (5) and see if someone has a donor car in my area then yes.
bluzvr4
10-25-2011, 08:27 PM
ill talk with some of my freinds and see. you have any clue on what the price range would be? where r u located?
Boostaddict
10-26-2011, 12:45 PM
yes easily removable, but the inital install will have weld in plates. but after that you will bolt into those. so you wont have to remove the weld in plates. i need to look over the rule book before i start it. But that is a given.
This way you would be able to remove it, for street racing. bolt it in for the tracks that make you.
And of course it will all be tig welded. what about stainless steel instead of cromoly or mild steel. If we go that route we dont have to have them coated. and we can use smaller wall thickness as per rule book.
Unless you make the "cage" simply for looks and not safety there will be no way to remove the main hoop once rear bars and bracing are welded to it (unless maybe you own a spyder and can put the top down). Any "cage" that isn't fully welded is not safe for anything other than extreme carshowing and would not pass tech inspection at any sanctioned racing event.
FeaRpb
10-26-2011, 01:34 PM
interesting
Unless you make the "cage" simply for looks and not safety there will be no way to remove the main hoop once rear bars and bracing are welded to it (unless maybe you own a spyder and can put the top down). Any "cage" that isn't fully welded is not safe for anything other than extreme carshowing and would not pass tech inspection at any sanctioned racing event.
yep. either it becomes one with the frame of the car--or it's for looks.
markoverclock
10-26-2011, 01:58 PM
Unless you make the "cage" simply for looks and not safety there will be no way to remove the main hoop once rear bars and bracing are welded to it (unless maybe you own a spyder and can put the top down). Any "cage" that isn't fully welded is not safe for anything other than extreme carshowing and would not pass tech inspection at any sanctioned racing event.
wrong, they make bolt in cages already i doing another way not the common way. Its in the rule book for bolt in cages. ill find it later, i have installed many bolt in cages on cars that went 8's in the 1/4. That pass tech inspections.
Thier is also requirements for each type of steel used. i just dont remember off the top of my head.
Boostaddict
10-26-2011, 03:04 PM
I guess you are talking about a "roll bar" not a cage. Even for a roll bar the only bolting allowed in NHRA the last time I checked was from mounting plates to the floor and swing-out side bars. All main hoop supports required full pass welds. Not exactly idea for removing each time you go to the track, but doable I guess (compared to a cage would be impossible).
You could probably use a bicycle helmet in an 8-second car too (and it might pass tech inspection at your track not mine). That and a bolt-in cage would be about as equally safe if the car was in a serious accident.
AdamVR4
10-26-2011, 03:12 PM
I guess you are talking about a "roll bar" not a cage. Even for a roll bar the only bolting allowed in NHRA the last time I checked was from mounting plates to the floor and swing-out side bars. All main hoop supports required full pass welds. Not exactly idea for removing each time you go to the track, but doable I guess (compared to a cage would be impossible).
You could probably use a bicycle helmet in an 8-second car too (and it might pass tech inspection at your track not mine). That and a bolt-in cage would be about as equally safe if the car was in a serious accident.
Curious why you think there's a huge difference in strength between a weld-in cage and a bolt-in cage. I'm assuming the bolt-in cage would have a plate on the under side of the car, so for the cage to rip out of the car, you'd be talking about the same length of chassis/floor board/whatever tearing in either case.
Unless I'm missing something.
Is there such a thing as low profile slider seat brackets? My helmet is pretty much against the roof of the car in a stock seat and I'm only ~6'0"
Boostaddict
10-26-2011, 03:48 PM
Curious why you think there's a huge difference in strength between a weld-in cage and a bolt-in cage. I'm assuming the bolt-in cage would have a plate on the under side of the car, so for the cage to rip out of the car, you'd be talking about the same length of chassis/floor board/whatever tearing in either case.
I’m not talking about floor bolts (which are allowed on a roll bar) and either was mark (he said he’d weld a plate to the floor and then bolt the cage to the plate). A proper bolted floor joint (in my mind) would sandwich above and below the floor with multiple fasteners (but still wouldn’t beat a boxed-in welded floor mount). I’m talking about main hoop and supporting structure bolt-in kits that I’ve seen in some of the club racing bolt-in “cages”. These use slip joints, bolts, and other retention mechanisms to build and support the main cage structure for ease of assembly and removal. Strength comes into play with poorly designed bolted joints (every swing-out bar I’ve seen have slop/play in them for instance). Rather than being a ridged joint (like a proper weld) where load is carried/dispersed to the rest of the support structure, you are limited by the strength of the fastener alone (or the material directly supporting the fastener which is probably weaker than the fastener in the case of mild steel tubing). In an impact (which most every accident is) the joint will fail long before load can be distributed to the remaining structure. If the bolted joint was properly designed, had proper installation preload, and was 100% ridged (which I’ve never seen on any bolt-in kit) then great.
Thinking about it for another minute (rather than just typing endlessly) I guess it all comes down to cross sectional area for load carrying and the impact strength of each material. If you were able to design a roll cage with removable attachment points with as much (or more) cross sectional area than the equivalent welded member (and it was designed/implemented correctly) then it "could" work fine.
But its not strength alone. Bolt-in cages are always more intrusive than a weld-in cage… you simply can’t get a bolt-in cage as far away from the occupants as a weld in cage (very important in a cramped car like ours). In the event of a roll-over or serious accident you need the cage as far away from the driver as possible, as hitting the cage with your head will probably kill you. A minimal roll bar is not as big of a deal since you only have 2 bars to worry about (main hoop and side bar) but this discussion was about a cage. An 8-second legal bolt-in cage would be a death wish in a car like ours (assuming the car was doing an 8-second pass).
markoverclock
10-26-2011, 08:41 PM
All cars with an OEM frame must have roll bar attached to frame.
Cars without frame (uni-body like ours) use 6" square
1/8" steel plates on top and bottom of floor, securely bolted together with at least four 3/8" bolts, or top plate welded to rocker sill.
(5point or 6 point)
Section 20 page 19 those are good for 10.0 seconds on the 1/4.
For cars going 8.5 and slower you can still bolt the cage in but must have the halo and d frame welded part as the main hoop.
And we cant use Stainless i contacted NHRA and SFI both.
markoverclock
10-26-2011, 08:44 PM
thier are specs on how close the roll bar to your head is too. I will set this cage up for the stock seats, and maybe borrow davids cobearu seats and check fitment when time comes.
What type of seats do most of you have?
FeaRpb
10-26-2011, 08:58 PM
I will have cobearu.
familyMAN
10-26-2011, 09:33 PM
Stock for now. Fixed back Corbeau or Sparco next spring.
J. Fast
10-26-2011, 10:48 PM
Unless you make the "cage" simply for looks and not safety there will be no way to remove the main hoop once rear bars and bracing are welded to it (unless maybe you own a spyder and can put the top down). Any "cage" that isn't fully welded is not safe for anything other than extreme carshowing and would not pass tech inspection at any sanctioned racing event.
That's not true at all. 6 mounting point slip tube and bolt-in is absolutely legal for NASA and SCCA. As a matter of fact this JD-Tube bend rendering of this Street or Track design will pass tech, is perfectly legal, and is also quite safe. :)
http://i788.photobucket.com/albums/yy163/JFastMotorsports/SFINASASCCAlegal.jpg
stealthee
10-26-2011, 10:55 PM
I wish I had taken a pic of the fence post cage I saw once. My brother races dirt track, and the one other kid usually ran a Dodge Daytona with the 3.0, but brought up a Cavalier that his dad had bought for the engine. You need a cage to run at the dirt track, so he "fabbed up" a cage out of fence post. They didn't even question it. :eek:
J. Fast
10-26-2011, 11:02 PM
Some individuals are pretty resourceful. I suppose if the material was thick enough and didn't have any seams it would work. Probably a really cheap way to go about securing material, I'd love to see it.
I wish I had taken a pic of the fence post cage I saw once. My brother races dirt track, and the one other kid usually ran a Dodge Daytona with the 3.0, but brought up a Cavalier that his dad had bought for the engine. You need a cage to run at the dirt track, so he "fabbed up" a cage out of fence post. They didn't even question it. :eek:
split-rail safety-cage? ROFL!
MeTarzan
01-24-2012, 02:17 PM
Well I know this has been put on the back burner due to work load but cars will be in the shop getting a couple things made up this week....Stay tuned :D
MeTarzan
01-25-2012, 06:05 AM
Well car was in the shop and going to be making solid billet rear diff mounts, tubular mustach bar which should help to assist with the broken axel problems.
We will be pulling the rear subframe probably tomorrow to get a jig created to make a nice tubular suframe.
MeTarzan
01-25-2012, 06:29 AM
http://img829.imageshack.us/img829/9273/3kfuelcell.jpg
This is the test fitting of our bolt in aluminum fuel cell, just need to make some changes to the mounting tabs and we will have a 12-15gallon bolt in fuel cell that will be capable of using stock filler neck with a remote rollover vent
MeTarzan
01-29-2012, 04:47 AM
So what else are you all wanting to see developed??
Gearhead
01-31-2012, 12:26 AM
Poly suspension and frame bushings for less than $1000.
heptone182
01-31-2012, 03:00 AM
TUBULAR FRONT AND REAR CRASH BARS!!!! Specifically the front... sorry if this has already been mentioned but NOBODY makes these anymore for FMIC applications. I'd buy one so fast..
MeTarzan
01-31-2012, 09:14 AM
TUBULAR FRONT AND REAR CRASH BARS!!!! Specifically the front... sorry if this has already been mentioned but NOBODY makes these anymore for FMIC applications. I'd buy one so fast..
A FMIC Brace wouldn't be hard to make the only problem would be is were the mounting locations for the FMIC are since almost all I'm sure are slightly different but if I can get some reference pics as to where different manufactures are then I'm sure we could crank something out.
MeTarzan
01-31-2012, 01:45 PM
got some new pictures of the fuel cell over here http://www.3sgto.org/f2/some-new-things-7526.html
heptone182
01-31-2012, 05:59 PM
A FMIC Brace wouldn't be hard to make the only problem would be is were the mounting locations for the FMIC are since almost all I'm sure are slightly different but if I can get some reference pics as to where different manufactures are then I'm sure we could crank something out.
Totally. I'm not too sure on the old design 3SX was carrying, but if I'm correct, it was for the most part universal for most FMIC's and was hidden even behind '99 bumpers with the original crash bar upper lip cover part of the bumper removed. Can anyone confirm? It bolted right up to the original crash bar mounting points/shocks right?
Here's a pic of a custom one "Single Turbo Flamer" posted on the other site. Credit to him. Not too sure I like the way this one bolted up. I kinda like the original mounting points. No intercooler in this pic though... Anyone got a pic of the old 3SX version?
http://i1097.photobucket.com/albums/g354/heptone182/a8e714a6.jpg
Gearhead
01-31-2012, 07:26 PM
Totally. I'm not too sure on the old design 3SX was carrying, but if I'm correct, it was for the most part universal for most FMIC's and was hidden even behind '99 bumpers with the original crash bar upper lip cover part of the bumper removed. Can anyone confirm? It bolted right up to the original crash bar mounting points/shocks right?
Here's a pic of a custom one "Single Turbo Flamer" posted on the other site. Credit to him. Not too sure I like the way this one bolted up. I kinda like the original mounting points. No intercooler in this pic though... Anyone got a pic of the old 3SX version?
http://i1097.photobucket.com/albums/g354/heptone182/a8e714a6.jpg
They're easy enough to make. I'd buy one if they were made for less than what 3sx was selling them for. $500 is a bit rediculous for tubular crash bars. I'd rather make them myself for that price.
MeTarzan
02-08-2012, 11:29 AM
this isnt for our cars but just wanted to keep you guys interested in the thread. And I'm sure a few of ya have DSM's that could use a lil love on the back side :)
Its one of our newly redesigned rear diff covers....we would have made the 3S one but to our suprise there doesn't seem to be a functional need for them.
http://img684.imageshack.us/img684/6194/1gcover.jpg
FeaRpb
02-08-2012, 12:35 PM
Looks pretty.
Can't wait to see what else you come up with.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.