View Full Version : e85 with bigger injectors and fpr
NOMIEZVR4
07-08-2011, 10:55 PM
Hey guys would it be beneficial to convert to e85 with only the use of a adjustable fpr?
Ive got a set of 450's and evo 560's just sitting around. Doing the math for injector compensation, if I'm not mistaken, (old injector/new injector-1)*100...450's would flow about roughly 20% more fuel and the 560's about 35% more @ 43.5psi
E85 requires about 30% more fuel. So if I threw in the 450's and raised fuel pressure just a tad or the 560's and lowered fuel pressure a bit, would it be worth my time? I would monitor with a wideband and soon when I have access to evoscan datalogging software, ill take datalogs as well.
The benefits of running e85 are obvious...so what do you guys think? Eventually I will get a flash tuned setup, (next year) but just for the time being it would be fun to see how much more power can be squeezed out of a simple setup like this..
Opinions? Thanks :)
apickle
07-09-2011, 12:42 AM
I'm planning on trying the same thing, with 560's and an AFPR, but bumping the pressure up a tad. My 560's all flowed out to ~590cc @ 43.5psi, for what it's worth. Closer to a 39% adjustment rather than 35%. Assuming the 450's are rated at 43.5, bumping to 50psi would get you to 480cc, still only a 25% bump. You'd probably be safer running the 560's at 38psi, but then you'd still be a touch overfueled. You don't have any sort of fuel controller?
Gearheadvr4
07-09-2011, 09:12 AM
I'm not sure this would be safe to do with a FPR alone. Guesstimates based on calculations isn't a good way to go. You really need a wideband and some kind of a basic fuel controller to tune it.
My 2 cents. On the other hand if you gave the cash to fix what you could break... Then I'd love to see it done to see what gain you'd get.
vr3.9
07-09-2011, 01:32 PM
This doesn't sound like a good idea to me. However, if your going to do this and you have an upgraded hotwired fuel pump, I would get around 500cc injectors and turn the pressure up until your fuel trims are happy. Trying to do this before you can log would be really bad. Flash tuning? I would never go E85 unless, you can switch back and forth easily or it's a dedicated race car on a trailer. I do the first. The benefit would be that you can max out those 9b's.:rolleyes3:
FastOldGuy
07-09-2011, 02:01 PM
I'm running E85 in my Shelby and there aren't many E85 stations around but I can dump my 93 octane tune in and fill up anywhere. Its a 2 minute deal. In your case you might get stranded IMHO
vr3.9
07-09-2011, 02:21 PM
I'm running E85 in my Shelby and there aren't many E85 stations around but I can dump my 93 octane tune in and fill up anywhere. Its a 2 minute deal. In your case you might get stranded IMHO
Same here, probably not as easy as you though. Do you have an E85 sensor? I change fuel pressure and switch the data file on the SAFC. If you really want to do this then get an SAFC too. You won't be able to get enough adjust ability with AFPR alone. The down side for me is that 780's give so much timing on 93 I can only run waiste gate boost. Which is not a problem when going on a trip anyway.
NOMIEZVR4
07-09-2011, 02:48 PM
Ive got ported 19T's and a built motor/ported heads. :)
NOMIEZVR4
07-09-2011, 03:03 PM
Ive got plenty of e85 stations, this is my weekend car, its only going to be run on e85 and a crapload of boost(eventually..)
I'm just putting the break-in miles on the motor right now with the stock injectors and wastegate boost.
vr3.9
07-09-2011, 03:23 PM
Ive got ported 19T's and a built motor/ported heads. :)
get something for fuel management and some big injectors. The e85 will be worth it
apickle
07-10-2011, 12:35 AM
I didn't say it was a GREAT idea, but it would be possible. You'd want to go a bit richer on the base size of the injector, and tweak fuel pressure until the fuel trims are happy, like was said. I would also at a MINIMUM be logging knock. I've been blending about 30% E85 with 92 octane myself, and it made a huge difference in how the car behaves with the 560's and 15Gs. I changed my MAFT from -36% to -28%, and did some minor tweaking (that needed to be done anyway) to the mid load map, and the car pulls much stronger.
If I had to do it over again, I'd probably size my injectors for a -50% correction, and run straight E85. The extra timing advance from the piggyback is great when paired with the higher octane, and it'd still be drivable if I had to dump in some normal premium gas in an emergency. I may try bumping the fuel pressure up, and seeing how much I can push the 560's on straight E85 after the next test & tune night on the 20th. If that doesn't work out, I'll switch to 650's this fall or next spring, along with a bit bigger fuel system.
I will have more info about this e85/450/560cc/no-controller deal soon... I hope.
Gearheadvr4
07-10-2011, 02:52 AM
I wish we had e85 here...
You didn't mention the 19t! I say you will not be getting the most out of that setup without the proper support. 19t can be very fun turbos when tuned.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.