View Full Version : blocking oil feeds...
JasonY
07-06-2011, 08:43 PM
Do you think plugging the oil feed lines at the block will cause any problems with oil flow?
Jason
Primus101
07-06-2011, 09:04 PM
Feed lines for the turbo's?
Not whatsoever-
Unknownvr4
07-06-2011, 09:05 PM
subscribed.
I would like to know as well but i dont think it will cause any issues
JasonY
07-06-2011, 09:14 PM
Yeah i need to block the two feeds at the block since my turbo is water cooled only. What fukin sizes are those banjo bolts again?
Jason
Ninja Performance
07-08-2011, 10:44 AM
won't cause any issues. May be better for the over all oiling system even....
-Chris
STiedVR4Guy
07-08-2011, 11:18 AM
Yeah i need to block the two feeds at the block since my turbo is water cooled only. What fukin sizes are those banjo bolts again?
Jason
As in.. Singular?
AdamVR4
07-08-2011, 11:24 AM
M10x1.25 I believe based on this conversation 13T front turbo banjo bolt help ASAP!!!!!!!!!! - 3000GT/Stealth International Message Center (http://www.3si.org/forum/f1/13t-front-turbo-banjo-bolt-help-asap-414940/)
dpartinvr4
07-08-2011, 11:28 AM
idk that it will be an M10, the coolant bolts are bigger than the oil feed bolts, it might be an m8x1.25, but it is 1.25, I had to go to sheid diesel to find one, and he ended up just using a dye and making me the bolt I needed
Chris@Rvengeperformance
07-08-2011, 11:50 AM
M10x1.25 I believe based on this conversation 13T front turbo banjo bolt help ASAP!!!!!!!!!! - 3000GT/Stealth International Message Center (http://www.3si.org/forum/f1/13t-front-turbo-banjo-bolt-help-asap-414940/)
yeah that's right, I had to retap my stock bolt to m10 by 1.50 to thread into the wrx cartridges.
green-lantern
07-08-2011, 12:26 PM
Just get an allen head stud for the oil filter housing and a NA oil sending unit housing will eliminate the other one. I think I have the sending unit housing if you want me to look. You can have it.
It's like this but doesn't have the hole for the oil feed.
http://www.3sx.com/store/catalog/stock-oil-pres-fitting-adapter-md161392-02-400l.jpg
JasonY
07-08-2011, 03:03 PM
As in.. Singular?
Yup! Billet 6765 single.
Thanks for the info!
GreenLantern(forgot your real name!) Thanks for the offer im just gonna cap it for now and when my forged block goes in do the real elimination of every single system not in use including in the wiring harness:scared:
Jason
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.