View Full Version : Will turbo 2 rx7 16" wheels fit my 1g?
Sin'sVr4
07-02-2011, 01:32 PM
I have access to getting some 16" rx7 turbo 2 wheels and they would be perfect for my track tires. Just wondering if anyone knows if tehy will fit? He said he thinks the offset is +40. Anyone have any clue?
HellBringer
07-02-2011, 01:52 PM
The FC3S wheels are 16x7 40mm offset. The FD3S wheels are 16x8 and 50mm offset (and extremely light). I wouldn't touch the FC wheels, but if the FD wheels will fit they're an awesome track wheel due to the weight. I think mine (older, unreinforced version) are ~13lbs each.
Sin'sVr4
07-02-2011, 02:03 PM
What size are my wheels?
The stock sizes all have an offset of 40mm or 40 ET and are:
14x6 w/ 114.3x4 bolt pattern (Base, Luxury, 87.5-88 SE)
15x6 w/ 114.3x5 bolt pattern (GXL, Sport, GTU, 91 coupe)
15x6.5 w/ 114.3x5 bolt pattern (convertible)
16x7 w/ 114.3x5 bolt pattern (Turbo, GTUs, Infini IV)
^^17.1 lbs
so should be ok? I could go to 16x8.5 right?
Why wouldnt you touch them hell? 17 lbs is light as hell and i can get em for 50 bucks
Sin'sVr4
07-02-2011, 06:11 PM
so, dave(broomfield racing) is running 16x7 mb wheels and running 26" x 9.5" x 16" QTP Hoosiers...MB Comp wheels. i didnt think you could go that much wider on rims. So then i could do the same thing and run the same hoosiers on these wheels correct?
Broomfield Racing
07-02-2011, 06:20 PM
16x8 Mb comps.
Sin'sVr4
07-02-2011, 06:47 PM
Oh, i was going off the link you provided in the other thread i started about slicks. sry bro. Nice job btw at NG
Broomfield Racing
07-02-2011, 06:53 PM
Did I say they were 16x7? If so my bad...they are definetly 16x8.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.