View Full Version : Who knows how to install the HKS Twin power DLI?
Sin'sVr4
06-23-2011, 11:19 PM
The instructions are for a lancer and I searched the other forum and cant find anything on it. Anyone know a good link or can explain it for me?
Ok found this post and piture is perfect!!
http://i62.photobucket.com/albums/h116/mikepeterson/hkstwinpowerinstall.jpg
MIke
Keyan
06-23-2011, 11:22 PM
Attach 3 yellow wires to the 3 ground wires of the coils. Attach the red wire the power wire of the coils. Ground the black wire. Enjoy.
[Droid X via Tapatalk]
Sin'sVr4
06-23-2011, 11:32 PM
nvm found the perfect link. was just looking under hks dli instead of twin power. sweet!!!
Ninja Performance
06-23-2011, 11:40 PM
Don't have to wire crimp oring onto terminals though, can just solder onto them, which I prefer.
-Chris
GTOJOE
06-24-2011, 01:28 AM
Looked this same thing up a few days ago. Found some instructions on 3si looks pretty simple. I expected to see a main power wire though.
Sent from my GT-I9000 using Tapatalk
mb3000
06-24-2011, 01:57 AM
I've got mine wired into the harness so I can remove the coilpack without any nonsense.
Ninja Performance
06-24-2011, 09:36 AM
I've got mine wired into the harness so I can remove the coilpack without any nonsense.
Yes, behind the plug in the harness so hat the coilpack can be removed. This is how it should be.
-Chris
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.