View Full Version : My VR-4 Build Diary--and life story(long read)
NOMIEZVR4
06-23-2011, 02:16 PM
My obsession with these cars started way back when I was in grade school. I don’t remember exactly when I saw the first one, but it was the wide stance of these cars made me fall in love with them…especially the rear end.
The 3000GT VR-4 was the car of my dreams. I didn’t want anything else. Back in high school, I used to drive by all the Mitsu dealers around my town to check out the VR-4’s in the showrooms and parking lots…it was a hobby of mine. Anytime I was doing anything, if I laid eyes on a VR-4 parked anywhere I would immediately tell whoever was driving to stop and turn back around and take me to the car..lol
I used go to the libraries and read through the old publications of Road and Track, Car and Driver, Motortrend, Turbo, etc…every article that was published about these cars, I read over and over again. It was always disappointing to me that the VR-4 rarely placed 1st, but it didn’t diminish the love that I had for the car.
The first chance to drive a VR-4 came in my junior year of high school. I had saved up about 9k and found a red 93 VR-4 for sale not too far from where I lived. I took my mom with me and actually test drove the car! Looking back, I don’t know how the owner of that car let me (a high school kid) test drive his VR-4…The car was perfect, I was ready to give him my wad of cash, but for one reason or another, I didn’t get the car. I’m glad I didn’t, otherwise I would’ve been broke for the rest of my life…
My love and obsession with these cars only grew over time. I promised myself that I would probably never own one only because I liked the car too much it would make me broke and make me make stupid decisions. The closest I ever got to these cars was going to a few NG’s and making a video of one.
http://px5.sfstatic.com/thumbs/0000/34/59/54395.jpg (http://www.streetfire.net/video/3000gtstealth-2006-national-gathering-st-joseph_54395.htm)3000GT/Stealth 2006 National Gathering St. Joseph, (http://www.streetfire.net/video/3000gtstealth-2006-national-gathering-st-joseph_54395.htm)
Fast forward a few years. 2010, I’ve graduated from college, got my degree, Ive been blessed to own and manage run my own repair shop (with my brothers) for about two years now…and thank God things are going pretty well. I’ve got a crotch rocket, a turbo miata and a camry as a daily driver. I’ve been lurking and posting on 3si since 2001…every so often just checking the classifieds, my curiosity getting the most of me.
So one day browsing the classifieds I find a Sorrento Red 95 VR-4 for sale. Mostly stock, sunroof (It was a must for me!! If I was ever going to own one…) and owned by an older gentleman. Relatively low miles and it was fairly priced too….so I told a few friends just for kicks and made nothing of it.
http://i314.photobucket.com/albums/ll440/nomiezvr4/100_1013.jpg
Well the car remained in the classifieds for some time….and each day as it sat, I somehow convinced myself that it wasn’t too expensive and I could just buy it and keep it relatively stock and just enjoy it for what it was. So I called the owner of the car just to get a few details and just ask a few questions….and before I knew it, the 95 VR-4 which called Texas home was coming to Chicago!
Now this is where the fun starts. So the day comes, August 25th, 2010 my VR-4 officially arrives at a trucking port/hub in Illinois, about 30 miles away from my house. It was gonna take the shipping company an additional two days to bring the car from the port to my garage. I couldn’t wait…I called headquarters and told them I was coming to get MY own VR-4(I still couldn’t believe it..!)
So I arrive, show ID, pay them off and grab the keys to my VR-4...and I’m off!! The drive back to the shop was amazing, it was a nice day, sunny and I had the sunroof open and I was just cruising in my very own VR-4! It was unreal, I actually now owned the car of my dreams, the keys that I had in my hands were for my own VR-4…I still couldn’t believe it…!!!:eek:
http://i314.photobucket.com/albums/ll440/nomiezvr4/5-1.jpg
So I arrive at the shop, all my friends are there waiting to congratulate me, I pull into the shop, with a huge grin on my face unable to control myself. I let the car cool down and shut her off and pop the hood to show everyone my new pride and joy…everyone was happy for me…
Now its time for test drives, I gotta show them what 320hp Twin Turbo’s are all about…So I start the car and hear an awful sound, sounded like lifter tick but louder. In the back of my head I was like no way, it can’t be a spun bearing. No way. So I rev the car and it got louder (the knock). Was this for real? Its gotta be the lifters. I recheck the oil level, (I checked it before I left the shipping facility) and oil level is fine…I didn’t want to believe it, but this was the reality. My VR-4 had spun a bearing. I drove it 38.6 miles exactly now my car sat with a spun bearing. The car of my dreams had a spun bearing. This was unreal. I knew it was a problem with these cars but never in my wildest dreams did I ever think I was going to be a part of the Spun Bearing Club…well now it was reality and this was it.:(
And so, that was the beginning of my project…
I’ve owned a few DSM’s…great cars…had a lot of fun with them. Ive also owned two miata’s also very nice and fun little cars…Ive had my fair share of projects so this wasn’t anything new to me, the only difference was this time I didn’t have a choice..:rolleyes:
NOMIEZVR4
06-23-2011, 02:16 PM
First day in Chicago...
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2010-08-30175246.jpg
The texas heat really took a toll on the clearcoat and paintjob..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2010-08-30175159.jpg
It came with 13T's..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2010-08-30175523.jpg
Interior is 9/10...Active Aero works and so does the ECS..:bump:
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2010-08-30175443.jpg
A few hours later with a couple of buddies and this was the end result..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/23.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0279.jpg
Neatly organized...:D
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0308.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/5.jpg
NOMIEZVR4
06-23-2011, 03:05 PM
The car will be completely black when I am done with it, so this was the perfect time to paint the engine bay...and delete a few things that I didn't want...
Before
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0274.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0275.jpg
The magic stuff...
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0289.jpg
After..No more ABS, Cruise Control and Emissions..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0290.jpg
Took off the bumper, Front plastic shrouding, etc..to sand and prep for paint..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0306.jpg
Getting ready for paint..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0324.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0323.jpg
Let the painting begin!!:cool:
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0328.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0329.jpg
NOMIEZVR4
06-23-2011, 03:06 PM
The finished result...
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0342.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0342.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0340.jpg
Now the car sat for a few months like this while I waited for parts..and machine work to be completed...
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0442.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2.jpg
After months of waiting, I finally got my block back...Wiseco .60 pistons, Spool Rods and a fully balanced rotating assembly..now it was time for paint!
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-08003845.jpg
I think it came out pretty good...
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-08003859.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-08003918.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-11190047.jpg
NOMIEZVR4
06-23-2011, 03:07 PM
Brother helping with the heads..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-08011759.jpg
Primered them first..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-08011834.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-08003807.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-07232013.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-07231951.jpg
Putting it all together again now...
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-11190033.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0640.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0639.jpg
It looks amazing..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0642.jpg
NOMIEZVR4
06-23-2011, 03:08 PM
Stock heads..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/PortedIntakePorts.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/PortedIntakePort.jpg
SS Exhaust Studs
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/4-2.jpg
I also upgraded turbo's...had my 13T's converted to 19T's via Midwest Turbo Connection..http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0430.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0431.jpg
My 19t next to a evoIII 16g..(16g on left)
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0452.jpg
I also ported my manifolds and turbo hotsides...these things are TINY!! I come from the world of DSM's and tdo5 turbos...I was so dissapointed when I saw the hotsides...http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0427.jpg
Both turbos ported
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0446.jpg
Manifolds were ported...I welded the front one also
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0439.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0441.jpg
NOMIEZVR4
06-23-2011, 03:09 PM
I also got Rays BHB...and upgraded to the JDM Gear
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0401.jpg
Welded..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/IMAG0404.jpg
Painted
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2-1.jpg
The finished project!! (thats me in the pic..)
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/13.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/3-2.jpg
I filled the stock mounts with 3M Windoweld..I hate solid mounts but wanted something more durable than the stockers..
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/1-2.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/4-1.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/1-1.jpg
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/3-1.jpg
I just fired her up last nite after 9 months FINALLY!! and so far so good, oil pressure is great, I think my oilpan has a slight seep but otherwise she is purring like a kitten..
Thanks for looking!! Up next is breaking the engine in, Full 99 conversion then upping boost and fuel mods/fmic...stay tuned!! :)
Nomie
terrets
06-23-2011, 05:43 PM
Verryyy nice looking car! And bay, that bay is sexyyy.
NOMIEZVR4
06-23-2011, 06:51 PM
Thanks, I have a battery relocation planned next in line and I'm going to get rid of the goofy couplers and hoses..I just wanted to get it together..
AdamVR4
06-23-2011, 07:29 PM
First of all, I didn't know (or maybe I forgot) you bought a VR4! I've always enjoyed your banter in my threads so it was great to read this story until it took the terrible twist.
Something tells me the engine had spun a bearing while the previous guy owned it. He dropped the pan and replaced the bearings so he could sell it. It's just way too coincidental for me to accept as "bad luck".
Anyway, glad to see you stuck with it! Looks like you did great work.
Regarding painting the heads -- It looks like you didn't mask anything off... Are you worried about paint chipping off the cam bearing blocks? Did you allow paint to get onto the mating surface of the head??? You've got enough turbo to lift the heads if everything isn't just right.
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2011-04-07232013.jpg
Also, in the shot of your intake ports... It looks like whoever did it didn't remove the valve guides. They cut down into the valve guides and left extremely thin aluminum around them. I'm no expert on head porting but this doesn't look like acceptable work to me. Hopefully it will be inconsequential.
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/PortedIntakePort.jpg
This is more like what I would have expected:
http://www.3sx.com/store/catalog/heads-3sx-port-polish-valves-springs-14-800l.jpg
Anyway, I don't mean to be a debby downer :) Congrats! I bet that thing will fly when you turn up the boost!
NOMIEZVR4
06-23-2011, 07:52 PM
Thanks Adam, after I primered and painted the heads I used one of those cookies and cleaned all the gasket mating surfaces down to the bare metal..So no issues there. :)
The shop that did the work is the same machine shop (Apex) that does all of AMS cars..including the EVO's and r35 GT-R's...I noticed that as well, its my first time getting serious headwork done, so I'm no expert but unfortunately there isn't anything I can do now..:/ Hopefully I shouldn't have any problems..
Yeah the bearings in the block were oversized from before..so it was tinkered with before I purchased it...:( Fortunately the owner of the car did give me some money back for repairs..
Thanks again!! :D
AdamVR4
06-24-2011, 11:39 AM
Thanks Adam, after I primered and painted the heads I used one of those cookies and cleaned all the gasket mating surfaces down to the bare metal..So no issues there. :)
The shop that did the work is the same machine shop (Apex) that does all of AMS cars..including the EVO's and r35 GT-R's...I noticed that as well, its my first time getting serious headwork done, so I'm no expert but unfortunately there isn't anything I can do now..:/ Hopefully I shouldn't have any problems..
Yeah the bearings in the block were oversized from before..so it was tinkered with before I purchased it...:( Fortunately the owner of the car did give me some money back for repairs..
Thanks again!! :D
One of those cookies? Is that like scotch brite or something? Wow, a previous owner that paid you for repairs? I take it he "forgot" about the engine work prior to selling you the car?
Hmmm... I can't put too much time into it, but I'm not seeing any pictures of AMS intake ports that show the valve guide.
Thought this was pretty cool.
YouTube - ‪AMS CNC Cylinder Head‬‏ (http://www.youtube.com/watch?v=miaWkDyiTFM&feature=player_embedded#at=35)
so...did you ever figure out how to put the back seats down?
NOMIEZVR4
06-25-2011, 10:24 AM
haha..yeah...my seats are re-upholstered and the latch was actually just covered up over the new leather..:p I had to feel for it then I finally got it..
familyMAN
12-29-2014, 12:00 PM
Bump:D
AdamVR4
12-29-2014, 12:32 PM
I'd forgotten your car was purple! :)
sergechronos
12-29-2014, 12:35 PM
Bump:D
You monster!
http://i230.photobucket.com/albums/ee7/Feynman0451/thread_necro_zpsbee6a12f.gif
NOMIEZVR4
12-29-2014, 12:46 PM
let me guess Eric...
machine shop still has your stuff and youre bored outta you're mind..LOL
This thread is outdated now. good time for a bump...
Through the past few years I got around to getting the 99 headlamps, 99 front/ OEM lip, new window trims, FMIC, etc..the final plan cosmetically is to have a widebody with OEM roof and Volk GT-C's in spark silver or CCW SP500's(had them...didn't like how they looked)....AND A NEW PAINTJOB...:D some recent pictures...
BEFORE
http://i314.photobucket.com/albums/ll440/nomiezvr4/VR4/2010-08-30175246.jpg (http://s314.photobucket.com/user/nomiezvr4/media/VR4/2010-08-30175246.jpg.html)
AFTER
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20140427_001_zps3709f887.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20140427_001_zps3709f887.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20140411_002_zps7d226ad8.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20140411_002_zps7d226ad8.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20140427_018_zpsf37c62bc.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20140427_018_zpsf37c62bc.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20140411_003_zpsac72d12a.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20140411_003_zpsac72d12a.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20140427_010_zpse6637181.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20140427_010_zpse6637181.jpg.html)
familyMAN
12-29-2014, 12:47 PM
I'd forgotten your car was purple! :)
I don't mind that color on 1st gens but man does Nomie's car look infinitely better now. (Even with unpainted fenders and hood;))
NOMIEZVR4
12-29-2014, 12:47 PM
Just installed a Scoote 2 hood on my car and it was a LOT of work to make it fit. I put good 4+ hours into it to make it fit...its still got more gap than the stock hood where it meets the fenders but I'm a bit more hardcore when it comes to weight reduction especially considering how fat this thing is...haven't hit the scale yet but it should be in the sub 3500 region now...just a few small items and 34XX should be achieved.
These pictures are a few days old...I've since installed hood pins and done a little more massaging of the the hood and now its more flush. I'll post updated pics later.
http://i314.photobucket.com/albums/ll440/nomiezvr4/20141008_130819_zps75da7e38.jpg (http://s314.photobucket.com/user/nomiezvr4/media/20141008_130819_zps75da7e38.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/20141008_130935_zps66766bb5.jpg (http://s314.photobucket.com/user/nomiezvr4/media/20141008_130935_zps66766bb5.jpg.html)
thanks guys! Last few candid shots before she gets waxed and goes out for her official photoshoot...
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20141008_002_zps7b3aee79.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20141008_002_zps7b3aee79.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/WP_20141003_005_zpsfa30f4a1.jpg (http://s314.photobucket.com/user/nomiezvr4/media/WP_20141003_005_zpsfa30f4a1.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/20141006_150235_zps5551625a.jpg (http://s314.photobucket.com/user/nomiezvr4/media/20141006_150235_zps5551625a.jpg.html)
slightly older picture w/out the hood..
http://i314.photobucket.com/albums/ll440/nomiezvr4/20141003_143937_zps7a155ebb.jpg (http://s314.photobucket.com/user/nomiezvr4/media/20141003_143937_zps7a155ebb.jpg.html)
Oh and since I haven't posted any dyno charts like I said I would...so here is an older chart from a few months ago...here is a comparison of the old intake setup(maf blue line) to MAF translator(redline). Look at the boost curve :)
http://i314.photobucket.com/albums/ll440/nomiezvr4/comparo_zpsf0aad756.jpg (http://s314.photobucket.com/user/nomiezvr4/media/comparo_zpsf0aad756.jpg.html)
Car is running more boost now and makes ~540awhp and 34XXlbs now. Haven't hit the scale since last year..
familyMAN
12-29-2014, 12:49 PM
let me guess Eric...
machine shop still has your stuff and youre bored outta you're mind..LOL
Yep:(
You need to add pics with the volks and fenders!
Edit: you are fast! Volks added as I typed.
NOMIEZVR4
12-29-2014, 12:51 PM
http://i314.photobucket.com/albums/ll440/nomiezvr4/IMG_6442_zpsa02d46f0.jpg (http://s314.photobucket.com/user/nomiezvr4/media/IMG_6442_zpsa02d46f0.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/IMG_6438_zps293885aa.jpg (http://s314.photobucket.com/user/nomiezvr4/media/IMG_6438_zps293885aa.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/IMG_6421_zps060943fa.jpg (http://s314.photobucket.com/user/nomiezvr4/media/IMG_6421_zps060943fa.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/IMG_6423_zps11de5a23.jpg (http://s314.photobucket.com/user/nomiezvr4/media/IMG_6423_zps11de5a23.jpg.html)
Thanks Eric..!!
So I started and finished installation of the passenger side fender. Additionally I also completed the installation of the driver fender 100%. Its fully bolted in place. Considering the fenders are aftermarket, fitment is pretty good. I feel a lot better now that they are completely in place. Only thing to take caution on is when bolting the screws down, I didn't torque them down super hard, just snugged all the screws in place.
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141220_185500_zps851a4c6d.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141220_185500_zps851a4c6d.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141220_165951_zpsf89f17b8.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141220_165951_zpsf89f17b8.jpg.html)
Here are a few pictures of the passenger fender out of the box...no holes drilled. Backside..
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141220_170324_zps40644fc5.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141220_170324_zps40644fc5.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141220_170341_zps0a67470c.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141220_170341_zps0a67470c.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141220_185527_zpsa03910a2.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141220_185527_zpsa03910a2.jpg.html)
So now that the front fenders are in place, I'm itching to get the rears on. Here are a few pictures that highlight the fenders vs. stock lines. I kinda wish the fenders were a bit more aggressive. So far all my buddies are asking...is that the widebody....really??.lol I guess when the car is properly tucked and painted and cleaned it will have that 'pop' that I'm looking for. The more I look at it, the more I like it.
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141221_153611_zps47b7a68d.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141221_153611_zps47b7a68d.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141221_153617_zps32b8006b.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141221_153617_zps32b8006b.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141221_154834_zps1f34323d.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141221_154834_zps1f34323d.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141221_155224_zpsfa77014b.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141221_155224_zpsfa77014b.jpg.html)
http://i314.photobucket.com/albums/ll440/nomiezvr4/Mobile%20Uploads/20141221_155232_zps59b7c3c5.jpg (http://s314.photobucket.com/user/nomiezvr4/media/Mobile%20Uploads/20141221_155232_zps59b7c3c5.jpg.html)
The rear fenders I won't be responsible for installing completely but I will sand the rear quarters down to the metal so we can spray the etch primer and then finally the bonding epoxy. Hoping to get the rears on this week!!
Disrupter
12-29-2014, 02:19 PM
Looks great so far! I also wish they were a bit more aggressive with the "wide" part of the fenders, but it looks good with the volks.
familyMAN
12-29-2014, 04:15 PM
Sometimes I think more aggressive would be better, but as is, they will still look very classy once painted unlike some of the aggressive fended out there for some platforms.
sergechronos
12-29-2014, 04:39 PM
Honestly don't think they could be much more aggressive without either A) going Rocket Bunny style and basically having a 3/4 fender extension (which would look nice with the right set up I think) or B) something to help pull the side skirts, doors and bumpers out a bit further as well.
If they stuck out much further, they'd be almost comically oversized like that guy who sculpted foam to make his eco box try to look like some luxury car.
That having been said, I'll take a set of Rocket Bunny styled wide body fenders plz. :D
Disrupter
12-29-2014, 09:14 PM
We need to tell retro-spec to deliver his wide body project asap.
CoopKill
12-29-2014, 11:35 PM
He still has not finished the Combat wing yet...
OH!, and damn them wheels be sexy!
sergechronos
12-29-2014, 11:47 PM
..somebody photochop one up now. I want to see. 3/4 fenders with a wide aggressive look, whole car in a flat or matte finish probably be pretty mean looking.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.