View Full Version : Guaging interest : Want 98-99 vr4 flashable ecu's?
Drummer
06-22-2011, 11:47 AM
I am wondering if anyone would be interested in these ECU's. Part # MD360163 (99) or MD347250 (98). Both are the best flashable ECU's for our cars.
If you are interested in getting one of these extremely rare ECU's what would you be willing to pay for it? They retail for 960$ USD and wholesale for about 780$ if you can find one.
I am putting this request up for someone who may be able to source a few for a decent price.
Please PM me and let me know, perhaps a group buy will get us a good deal!
Jesters Deadd
06-22-2011, 12:02 PM
Just wondering why, because there are other options out there for far cheaper than $780... The 98 Diamante ECUs are looking very promising. Plus they are very easy to locate. Just doing a simple cost benefit analysis... is the added cost of the 99/98 VR4 ECU over a DiaEcu worth the funtionallity of the oem boost gauge and the active exhaust considering no one really uses them.
Drummer
06-22-2011, 12:20 PM
I understand the things with the other ECU`s. I personally will use a 98 or 99 VR4 for a silky smooth no nonsense transition. There are a few reasons that I prefer this route, after reading every thread on this topic wherever I could find them. You will not get a modded ECU for super cheap either, unless you mod it yourself. Thats fine, Im just putting this out there for those who want the cleanest route for a price they are willing to pay. I have a friend with a 99 in his 93 and its buttery smooth, stock running, 15g 550cc EBC etc.
This is not a money maker for me, just an offering. I dont even know how many MAY be available. I expect the price should be tempting. Thats why YOU are telling ME what your willing to pay, and I will forward that info.
If your not interested, thats fine too. Im pretty sure Im going to get a few PMs tho, due to the rarity of these things.
Thnx!
Drummer
06-22-2011, 12:28 PM
PS Im buying one from my contact regardless, he just asked if I needed more if he could get them. Hence this thread.
Greg E
06-22-2011, 01:21 PM
There will be a much more affordable option soon.
By the time you pay for an adaptor harness (no, you can't easily make these yourself unless you're lucky and find them used), the flash cable (no you can't make this yourself either) and the software (guess you could steal this from someone) the total cost for the swap will be more then an AEM.
Just saying....
Goallie11
06-22-2011, 01:40 PM
Whats the much more affordable option? Hints?
Jesters Deadd
06-22-2011, 01:44 PM
By the time you pay for an adaptor harness (no, you can't make these yourself),
Just saying....
I'm sorry but why can't someone make this? it seems pretty straight forward.
Jesters Deadd
06-22-2011, 01:47 PM
There will be a much more affordable option soon.
Been hearing that for awhile... just messin. :)
Drummer
06-22-2011, 01:54 PM
More than an AEM? As in 1500$ or used? Thats way high a price to compare to....
I understand that there are people working hard to make a package to sell. Nothing wrong with that. I was waiting for that myself. However, I had feelers out there for ECU's. A guy calls me. So I make some threads. Not meant to threaten those products.
While I appreciate what the boys are doing, there is no reason not to offer these to people here who may want them. There wont be many, if at all, to be had. The people that get them will likely be very aware that they need to make/buy an adapter harness, tactrix flash cable and get ECUFLASH, EVOSCAN (to log), the 3s file and proper 99 flash file AND learn how to alter the flash files.
Lets keep this simple, as its intended. If you want a 99 or 98 VR4 ECU and I can get one for you, tell me what you are willing to pay in a PM, and I will forward that to my contact. IF he can do it, he will.
Thnx!
prop7459
06-22-2011, 02:09 PM
Dont listen to Greg E about making the conversion harness. Check my thread which list the parts to build a conversion harness
http://www.3sgto.org/f13/diy-94-97-98-99-patch-harness-parts-3031.html
Drummer
06-22-2011, 03:53 PM
Dont listen to Greg E about making the conversion harness. Check my thread which list the parts to build a conversion harness
http://www.3sgto.org/f13/diy-94-97-98-99-patch-harness-parts-3031.html
Costs:
60-70$ DIY (plenty of soldering and crimping, buying parts, having the correct information/pinouts) If your low on cash, like to tinker etc then you can do this. Get it right so you dont mess something up! The info is out there.
200-250$ - If you want one ready made, the boys put in the time and effort, and should be compensated. If you want it done, dont have the ability/time to fabricate this, then pay someone a fair amount to do it for you.
Greg E
06-22-2011, 04:53 PM
Dont listen to Greg E about making the conversion harness. Check my thread which list the parts to build a conversion harness
http://www.3sgto.org/f13/diy-94-97-98-99-patch-harness-parts-3031.html
I was told you can't buy the individual connectors... You have to buy bulk sets. Unless you got another hook up???
Greg E
06-22-2011, 05:30 PM
Been hearing that for awhile... just messin. :)
An announcement will be made at NG. ;)
Greg E
06-22-2011, 05:33 PM
More than an AEM? As in 1500$ or used? Thats way high a price to compare to....
I understand that there are people working hard to make a package to sell. Nothing wrong with that. I was waiting for that myself. However, I had feelers out there for ECU's. A guy calls me. So I make some threads. Not meant to threaten those products.
While I appreciate what the boys are doing, there is no reason not to offer these to people here who may want them. There wont be many, if at all, to be had. The people that get them will likely be very aware that they need to make/buy an adapter harness, tactrix flash cable and get ECUFLASH, EVOSCAN (to log), the 3s file and proper 99 flash file AND learn how to alter the flash files.
Lets keep this simple, as its intended. If you want a 99 or 98 VR4 ECU and I can get one for you, tell me what you are willing to pay in a PM, and I will forward that to my contact. IF he can do it, he will.
Thnx!
No worries man. :) I'm not involved with the hardware side of any of this so if people went another route, it's no skin off my back.
All I'm saying is patients will pay off. Those of you who drop $800 on an ECU now will be kicking yourself later when Brett starts selling his ECUS.
Drummer
06-22-2011, 09:16 PM
I was told you can't buy the individual connectors... You have to buy bulk sets. Unless you got another hook up???
You can buy the individual connectors for the 94 ECU side currently for about 10$, the other end (3 males for 99 ECU) I already have, but dont know if they are currently stocked for indivdual sale. They were, but I dont know about now. Its true though, they are hard to find unless you buy bulk, being mostly OEM sales.
I am not too concerned with it because I took care of myself, Im leaving the building/selling part to the guys that are already doing it.
Looking forward to the announcement at NG, curious to see what the boys have cooked up and what price point!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.