dynamic's "race grind" cams

[95vr-4]

if anyone is interested in what they sound like, here ya go!

http://s5.photobucket.com/albums/y170/95vr-4/?action=view&current=kodak.mp4

[blindmist]

nice.

[Flamer]

Good stuff, now go on the road and get some pulls videotaped.

[Midnight92Vr4]

I'm curious, what rpms' is your idle set at? Sounds awesome.

[VR-4 0wnz j00]

Nice, bet she pulls hard up top :D

[95vr-4]

I'm curious, what rpms' is your idle set at? Sounds awesome.

that was stock idle, around 750. I did raise it to 1000 now. A little smoother with the solid mounts. :)

ill be tuning and posting more vids soon, dont worry!

Ryan

[mb7050]

Bad ass id le. How much do they cost ?

[pos-vr4]

I have Ivans car comming over in a few weeks, I will get a sound bite of his VR4, he has the last set GT Pro 280 billets, that car sounds nasty, will not idle below 1200 rpm and you have to pump the brakes stopping, kinda scary!

but it sounds like a pissed off popcorn popper!

[mh3kgt]

Sounds sick. Makes me want some cams...

[95vr-4]

I have Ivans car comming over in a few weeks, I will get a sound bite of his VR4, he has the last set GT Pro 280 billets, that car sounds nasty, will not idle below 1200 rpm and you have to pump the brakes stopping, kinda scary!

but it sounds like a pissed off popcorn popper!

haha, id love to hear that one too. Your right though, if cars have a demeanor, pissed or agry would be it!

mb7050, I think they are $750 from dynamic. Really not that bad considering you get 4 of them.

[Fletch]

That is a nice sound. For 750, I am going to look at them and bookmark them when I find it.

[MaxClass]

Are we talking full Race cams here and not Street/Strip? Are these suitable for the street?

I have a brand new set of Brian Crower #0141, 272 Street/Strip cams that will be going into my build. Probably won't be that radical but still I can't wait to try them out. Seven to Eight hundred is a good price. Some of DR's cams are regrinds so they require shims but should not be a problem.

BC also makes full stroker kits for our engines. Check them out here: http://briancrower.com/

[GTO Assassin]

Sounds real good. :bigthumb:

Scotty

[rossfashow]

what do DR street cams sound like? I have some but didnt install it yet.

[95vr-4]

Are we talking full Race cams here and not Street/Strip? Are these suitable for the street?

I have a brand new set of Brian Crower #0141, 272 Street/Strip cams that will be going into my build. Probably won't be that radical but still I can't wait to try them out. Seven to Eight hundred is a good price. Some of DR's cams are regrinds so they require shims but should not be a problem.

BC also makes full stroker kits for our engines. Check them out here: http://briancrower.com/

these are the "race grind" but I drive them on the street all the time. You can definitely tell but really there not bad at all. Of all the comments I get on my car, the thing that people point out the most is how it sounds at idle. These are regrinds, I did have to use shims.

good link! $6000 for a 3.4L....

[95vr-4]

http://www.dynamicracing.com/customer/product.php?productid=136&cat=54&page=1

theres the link if youre interested.

Ryan

[HilbillyHomeboy]

That's a mean idle. It's been so long Ryan, I can't remember..what are your basic mods?

Jeremy

[95vr-4]

That's a mean idle. It's been so long Ryan, I can't remember..what are your basic mods?

Jeremy

Hi Jeremy! nice to see you here. It has been so long.. haha.

I just posted this list on another forum, here ya go.

1st gen stock pistons
ported polished heads
1mm oversized si valves, I and E
si ti retainers and double springs
dynamic racing "race" grind cams
underdrive pulley
powdercoated everything I could under the hood
solid motor mounts (except stock tranny mount)
south bend dxd-c clutch
fidanza flywheel
mr gears
tein flex coilover w/edfc
rvm racing front and rear strut bars
powerslot front rotors
ebc green pads (f and r)
aem ems
720cc injectors
denso fuel pump
aeromotive fpr w/custom lines
ams side mount i/c's with hard lines
greddy type s bov
custom dual 3" exh
ported stock manifolds
custom nitrous system
s and w roll bar
corbeau forza seats w/5 point harnesses
custom trunk and back
aem wideband
boost gauge mounted in stock cluster, relocate gas gauge to stock boost location
cf hood
custom front bumper
99 rear center garnish
moda r6 wheels

I had 16g's to install when the car was down, but had to sell them through my divorce. So yeah, all that stuff and stock turbos, haha. One of these days, though.

Ryan

[enollava]

Nice video. Somebody should start a thread specifically for cars with cams. I'm sure it would be great to see videos of all the different cams out there and how they sound. Granted whats important is the performance gains, but sound sells. Since I don't have anything but stock cams in my car, I'll leave it up to somebody to create a cam video/sound clip thread where anybody with cams can post their videos. Would be best if the person starting it would update the original post with new videos and sound clips when somebody adds one later in the thread.

[Trab]

I would love to do this but the springs and other things u have to buy are so expensive....