PDA

View Full Version : Billet DR700's in stock



SnakeSkinner
06-13-2011, 08:47 PM
Looking to put over 600 HP to the wheels with a bolt on turbo? well here you go.

In stock ready to ship.

Dynamic Racing :: - Billet DR-700 turbos (http://www.dynamicracing.com/customer/product.php?productid=586&cat=189&page=1)

2fnloud
06-13-2011, 08:56 PM
Soon, not yet but soon.

GTOJOE
06-14-2011, 10:03 AM
In stock ready to ship.

I KNOW... I got the email.... twice :p you really should send me a set to make sure they still work in the southern hemisphere....... you know they might spin backwards.... I better test it..... :p

SnakeSkinner
06-14-2011, 09:43 PM
I KNOW... I got the email.... twice :p you really should send me a set to make sure they still work in the southern hemisphere....... you know they might spin backwards.... I better test it..... :p

If you dont want to get the DR newsletter you can unsubscribe, you would of had to subscribe to it to get it in the first place.

GTOJOE
06-14-2011, 09:46 PM
I don't mind the newsletter :p I think I signed up to the website twice [forgot I had already done it]... I'm just stirring you up.

Alan92RTTT
06-14-2011, 11:26 PM
I wish I had the $$ for a setup that would support thoes.

SnakeSkinner
06-15-2011, 03:06 PM
I wish I had the $$ for a setup that would support thoes.

550 injectors, fuel control, Fuel pump, hot wire, down pipe, Ignition, boost control is about all you need to get to 550 awhp with them.

600+ would take a few more/bigger things.

Alan92RTTT
06-15-2011, 05:12 PM
True, I was including the price of the turbos in the $$ that I need.

TT Eric
06-15-2011, 05:45 PM
Go Alan! That would be cool to see you running those turbos! :)

Eric

Alan92RTTT
06-15-2011, 05:56 PM
I agree but no $$$$ for them :(

I'll just have to suffer with my 13g's

GTOJOE
06-15-2011, 08:01 PM
550 injectors, fuel control, Fuel pump, hot wire, down pipe, Ignition, boost control is about all you need to get to 550 awhp with them.

600+ would take a few more/bigger things.

Such as? I'm aiming for that number [using either DR700 or DR750]. I have a ViPEC computer [running MAP], FPR, fuel loop, rail adapters etc from oohnoo [in the mail], looking at ID 725 injectors and a hotwired walbro [haven't ordered yet]. Also exhaust and intercooler. Besides engien internals etc what more would I need?

SnakeSkinner
06-15-2011, 09:31 PM
Such as? I'm aiming for that number [using either DR700 or DR750]. I have a ViPEC computer [running MAP], FPR, fuel loop, rail adapters etc from oohnoo [in the mail], looking at ID 725 injectors and a hotwired walbro [haven't ordered yet]. Also exhaust and intercooler. Besides engien internals etc what more would I need?

660cc or larger injectors, a intercooler up-grade, a good cat-back Exhaust, A Boost-a-pump or 2 intank pumps.

GTOJOE
06-15-2011, 09:45 PM
Hmmm I was worried about that. So looks like I need to look at dual pump hangers etc. Is there a way to only run the 2nd pump under a certain amount of load? cus two pumps [especially Walbros] could be very noisy. Also I assume the lines from the pump to engine would need to be upgraded to handle the extra flow?
Should I also be looking at a HKS Twin Power or similar?

SnakeSkinner
06-16-2011, 04:44 PM
Hmmm I was worried about that. So looks like I need to look at dual pump hangers etc. Is there a way to only run the 2nd pump under a certain amount of load? cus two pumps [especially Walbros] could be very noisy. Also I assume the lines from the pump to engine would need to be upgraded to handle the extra flow?
Should I also be looking at a HKS Twin Power or similar?


Gust run one denso pump and a KB boost-a-pump thats what I do. No noise at all


Ya HKS twin power DLI would be a good choice.

2fnloud
06-16-2011, 07:30 PM
What about the AEM twin power?

GTOJOE
06-16-2011, 08:15 PM
What about the AEM twin power?

I wondered about this as well..... it's $100 cheaper so if it's just as good why not save $100.00???

Sin'sVr4
06-16-2011, 08:45 PM
I have 19T's, 780 PTEinj, AEM EMS v1, STM fuel lines, dejon twintakes, dual wallys, aeromotive AFR, E85 tuned, ips DP, borla exhaust, hallman evo rx MBC, blitz ssbov, weisco forged pistons, 3sx forged custom rods, forged crank...blah blah,,what can I expect with the dr700/750's with my setup. Oh, and hks twin will be put on soon.

SnakeSkinner
06-20-2011, 06:01 PM
What about the AEM twin power?

I have not herd very good things about the AEM twin power.

I have never seen a HKS twn power fail, on over 10 yrs of using them.

SnakeSkinner
06-20-2011, 06:02 PM
I have 19T's, 780 PTEinj, AEM EMS v1, STM fuel lines, dejon twintakes, dual wallys, aeromotive AFR, E85 tuned, ips DP, borla exhaust, hallman evo rx MBC, blitz ssbov, weisco forged pistons, 3sx forged custom rods, forged crank...blah blah,,what can I expect with the dr700/750's with my setup. Oh, and hks twin will be put on soon.

What ever your injectors will Max out at on E85.... That will be your limiting factor.