View Full Version : For Sale HKS Twin Power DLI $399.99 Shipped - Limited supply
Ninja Performance
06-10-2011, 01:13 PM
Act Fast before they are all gone...AGAIN!
Ninja Performance - Your Affordable Performance Parts Store - HKS Twin Power (http://www.ninjaperformance.com/product_info.php?cPath=35_49400018&products_id=2032)
-Chris
mb3000
06-10-2011, 02:04 PM
What a deal!
i'll keep this in mind, if i can't find a better deal.
vr3.9
06-11-2011, 09:55 AM
Definitely interested in this. Need to sell some parts I guess to build up some funds.
I know coil pack condition and plug gap is going to have an effect, but what seems to be the max boost level for the stock ignition? Currently I'm @ .022 and not sure if that's my issue at 24psi.
I also want to be able to open that gap up some and try and improve gas mileage.
Ninja Performance
06-11-2011, 01:30 PM
I have seen some cars that are limited to 18-20psi then run whatever they want with the HKS Twin Power. And that is with new Coil pack/PTU/Wires. Also depends on the plugs, gap, and A/F.
-Chris
Ninja Performance
06-11-2011, 02:36 PM
Have sold a number of these. Still on sale and on the shelf. Get your now!
-Chris
FeaRpb
06-11-2011, 04:34 PM
Damn, I would be all over this if I wasn't buying turbos
I have seen some cars that are limited to 18-20psi then run whatever they want with the HKS Twin Power. And that is with new Coil pack/PTU/Wires. Also depends on the plugs, gap, and A/F.
-Chris
it might be overkill for what i want, but i ordered one anyway. 18-20 is probably the max psi i'll ever run. i'm not going for any world records; just some evo's on a stroker w/ pure pump gas. 500-600whp.
Ninja Performance
06-12-2011, 07:23 AM
It's always good to have a high output ignition ;)
-Chris
It's always good to have a high output ignition ;)
-Chris
..plus it will accessorize nicely with my purple taylor plug wires. :)
mb3000
06-12-2011, 10:33 AM
I need to find a new way to secure mine. Right now it's held down with cable ties :lol:
Ninja Performance
06-12-2011, 01:23 PM
I need to find a new way to secure mine. Right now it's held down with cable ties :lol:
Where the stock airbox is held down, there are some threaded holes. Use that and the mounting hole on the HKS to bolt it right in.
-Chris
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.