View Full Version : New Drag Racing Brakes for 3S
cjbyron
06-03-2011, 11:52 AM
I'm about 90% done working with TheBrakeMan in CA to get their drag racing brakes adapted for 3000GT. Should have install pictures done this week (cross fingers) after several rounds of shipping parts back and forth and remachining brackets, rotors and hats several times.
These are full-release, zero-drag race brakes. We went with their revolution rotors (stock pic below).
http://i.b5z.net/i/u/351269/i/MVC-797X.JPG
And their F3 and F1 calipers for front and rear respectively.
http://i.b5z.net/i/u/351269/i/f3-carbonfiber.jpg
http://i.b5z.net/i/u/351269/i/F1_CALIPER_WITH_CARBON_FIBER_PADSsmall.jpg
Front:
http://i.b5z.net/i/u/351269/i/EVO_FRONT_DRAG_KIT_2_CROP.jpg
So they should have parts and kits available for the 3S as soon as we confirm we are all done and no more changes needed.
Besides low profile and zero drag advantages here are the weights (in lbs):
Front Rotors
OEM = 17.6
Revolution = 6.2
Rear Rotors
OEM = 14.0
Revolution = 5.4
Front Calipers
OEM = 9.4
F3 = 3.3
Rear Calipers
OEM = 5.6
F1 = 2.4
Their website
The Brake Man.com - Drag Race (http://www.thebrakeman.com/drag_race)
The Brake Man.com - Revolution (http://www.thebrakeman.com/revolution)
Will update with 3000GT specific kit photos asap. Expect to have everything all installed and 100% done this weekend. This will then give another option to 3S owners looking for upgraded aftermarket brake systems.
FeaRpb
06-03-2011, 12:02 PM
I have been waiting for this. Very nice. In for pricing when it happens.
Alan92RTTT
06-03-2011, 12:37 PM
Those are some funky rotors.
i3igpete
06-03-2011, 01:27 PM
now that's light!
AdamVR4
06-03-2011, 02:10 PM
Ball park pricing? Keep up the good work!
BigTyla
06-03-2011, 02:24 PM
Very nice.
cjbyron
06-03-2011, 02:29 PM
Ballpark pricing IIRC will be ~ $2100 for fronts and $1600 for rears.
J. Fast
06-03-2011, 04:55 PM
That's pretty cool! On the lightweight brake setup topic does anyone know if the AMS ultralight brake package from an EvoVIII adapt to out cars? I know those are about 1700 for the fronts and 1100 for the rears.
Good thread! Thanks for your efforts CJ!
Broomfield Racing
06-03-2011, 07:26 PM
Ballpark pricing IIRC will be ~ $2100 for fronts and $1600 for rears.
Wow that is a lot.
Nationalmilkman
06-03-2011, 08:22 PM
That's almost 60 lbs. total shaved off the car!!!
cjbyron
06-03-2011, 08:34 PM
And it is rotational weight (even better!).
Austin@STM
06-03-2011, 11:25 PM
We have a couple seasons on our Evo set now, and they are deff some awesome brakes. They can stop the car from 170 without pulling the shoot no problem, and there isnt a set of brakes that looks better out there IMHO.
http://www.streettunedmotorsports.com/z/ricer_09/stm_wheels_front.jpg
I will be running a set of them as well on my car next year most likely.
http://www.streettunedmotorsports.com/z/ricer_09/stm_wheels_front.jpg
-Austin@STM
SICK!
definitely worth the price for this application.
let's see....that's a total of 58.6 Lbs of saved weight. 40 Lbs is rotors (unsprung weight) and the other 18.6 is sprung.
*pulls out benchracing calculator*
100lbs of sprung weight is worth 1/10th of a second in the 1/4....so 20 Lbs should be worth about .02 seconds; not a lot, but every little bit helps.
the kicker is the unsprung weight. 40 Lbs unsprung roughly = 400 Lbs sprung. that's .4 seconds in a 1/4.
granted, nothing is perfect in real-life, but it's safe to bet that most people can shave a healthy bit off their times with this mod.
p.s.
i'm assuming that the OP is comparing to the 2g brakes the NW3S car originally had. 1g & n/a owners will NOT see weight savings as significant. austin's stealth may not see much significant gain if he's already running n/a rotors on his 1g tt brakes. i'd need weights on those for accurate comparison.
i3igpete
06-04-2011, 02:00 AM
will they let you run with just one caliper/rotor if you have a parachute anyways?
Alex3000gt
06-04-2011, 02:08 AM
SICK!
definitely worth the price for this application.
let's see....that's a total of 58.6 Lbs of saved weight. 40 Lbs is rotors (unsprung weight) and the other 18.6 is sprung.
*pulls out benchracing calculator*
100lbs of sprung weight is worth 1/10th of a second in the 1/4....so 20 Lbs should be worth about .02 seconds; not a lot, but every little bit helps.
the kicker is the unsprung weight. 40 Lbs unsprung roughly = 400 Lbs sprung. that's .4 seconds in a 1/4.
granted, nothing is perfect in real-life, but it's safe to bet that most people can shave a healthy bit off their times with this mod.
p.s.
i'm assuming that the OP is comparing to the 2g brakes the NW3S car originally had. 1g & n/a owners will NOT see weight savings as significant. austin's stealth may not see much significant gain if he's already running n/a rotors on his 1g tt brakes. i'd need weights on those for accurate comparison.
I was once told that disc brakes always drag on the rotors ever so slightly - slowing you down.
Seems like this smaller rotor/pad combo could be useful in this respect as well. Of course the huge savings is in the decreased rotating mass and inertia.
I was once told that disc brakes always drag on the rotors ever so slightly - slowing you down.
Seems like this smaller rotor/pad combo could be useful in this respect as well. Of course the huge savings is in the decreased rotating mass and inertia.
yes, disc brakes do drag. it's even in the mitsubishi service manual--i know, because we looked at it when we did the 2g conversion & caliper rebuild on my car. think about it...there isn't a "retraction" mechanism for brake pistons; that's a 1-way operation. sure, you can get it to the point at which drag is as minimal as it will get...but you'd sacrifice brake response to get there, imho. unless you can design a disc braking system which doesn't drag, you're stuck with reality. i don't know if drum brakes drag, but they're not nearly as good as discs.
FeaRpb
06-04-2011, 07:15 AM
Hey Austin, do they work well on the street too?
cjbyron
06-04-2011, 10:51 AM
I'd heard nothing but good things (like Austin's comment above) from other racers about these products. That's a main part of the reason we went there and spent the extra time and money to get them applicable to the 3000GT. Yes, those OEM weights are for 2G rotors/calipers. Sorry I didn't specify.
The brakeman tornado are a "clean release and zero drag" caliper (per the company). They talk about it on their website. Another company that has zero drag race brakes is PerformanceFriction which we considered but decided on BrakeMan instead. But yes, zero drag is an important issue and is part of these calipers design.
HellBringer
06-04-2011, 01:57 PM
Will these allow you to run a 15" wheel?
cjbyron
06-04-2011, 02:57 PM
Yes.
That is originally what led us to go through this fabrication process to use these brakes.
R/T93
06-04-2011, 04:48 PM
Glad you went with these afterall.
Austin@STM
06-04-2011, 06:27 PM
Will these allow you to run a 15" wheel?
1) you can run 15's with the stock brakes with minimal work.
2) these brakes are actually zero drag as well. There are springs included that push the pads off the rotors when the pedal is not depressed.
-Austin@STM
Alex3000gt
06-04-2011, 08:59 PM
yes, disc brakes do drag. it's even in the mitsubishi service manual--i know, because we looked at it when we did the 2g conversion & caliper rebuild on my car. think about it...there isn't a "retraction" mechanism for brake pistons; that's a 1-way operation. sure, you can get it to the point at which drag is as minimal as it will get...but you'd sacrifice brake response to get there, imho. unless you can design a disc braking system which doesn't drag, you're stuck with reality. i don't know if drum brakes drag, but they're not nearly as good as discs.
All drum brakes I have seen are spring loaded and retract the shoe away drom the drum when not braking.
cjbyron
06-04-2011, 09:57 PM
1) you can run 15's with the stock brakes with minimal work.
2) these brakes are actually zero drag as well. There are springs included that push the pads off the rotors when the pedal is not depressed.
-Austin@STM
Maybe on an NA or 1G. But we are 2G & VR4 brakes. 15 or even 16s will not fit. No wheels I know of.
The springs are anti-rattle springs according to the mfg. They play no role in the drag. The zero-drag comes from the caliper design itself. But either way, yes they are zero drag calipers.
Alex3000gt
06-04-2011, 10:08 PM
I just hope that anyone who installs these also trailers the car to and from the track.
All drum brakes I have seen are spring loaded and retract the shoe away drom the drum when not braking.
this is true; i suspect that the spring mechanism is what creates the "zero drag" effect on both drum brakes and these specific disc brakes. normal disc brakes do have a small amount of drag.
cj's right; the 2g vr4 brakes won't fit 16's...let alone 15's.
HellBringer
06-05-2011, 12:09 PM
I just hope that anyone who installs these also trailers the car to and from the track.
:brilliant:
Yes, because a brake setup capable of stopping a 3000+lb car from 160+MPH in a relatively short distance won't be sufficient for the rigors of 'normal' driving...!? :rolleyes3:
cjbyron
06-05-2011, 12:40 PM
LOL, indeed! :)
All installed with new spec's as of yesterday. Fit is as we wanted and everything done. So they should have the 3S kits/parts on the shelf soon for anyone wanting the high performance drag race brakes. I'll try and snap some photos of them on the 3000 and post them up.
cjbyron
06-05-2011, 02:48 PM
Here they are installed. Enjoy.
http://www.nw3s.net/racing/photos/2011A/LFBrake3.jpg
http://www.nw3s.net/racing/photos/2011A/LFBrake1.jpg
http://www.nw3s.net/racing/photos/2011A/LRBrake3.jpg
http://www.nw3s.net/racing/photos/2011A/LRBrake2.jpg
http://www.nw3s.net/racing/photos/2011A/LRBrake1.jpg
StealthyStu
06-05-2011, 03:16 PM
I'm kind of surprised that no one here has yet offered any constructive criticism of the design. Alex3000gt has hinted at something very important that should be discussed.
The purpose of brakes is to convert kinetic energy into heat. Obviously, the more energy you convert, the more heat you make. Reducing the size of the heat sink, from the relatively large stock rotor size to the size of these, reduces the amount of energy you can convert at any one time before you heat soak the rotors. Additionally, drilling the rotors eliminates even more potential for energy transfer. From everything I've read while studying up on brakes, drilling was needed decades ago (in the 50's and 60's while they were using asbestos in brake pads) to eliminate brake fade associated with off-gassed fumes created by the pad. Modern pads don't create these fumes so drilling isn't required any more for anything other than aesthetics.
From what I've seen in this thread, there is alot of excitement about losing 60 lbs of rotating (and unsprung) mass. Yes, this will help a car accelerate faster. There are other ways to spend $3700 that will yield more dramatic acceleration gains without sacrificing braking performance and there are ways to reduce the weight of your vehicle for free.
If this were to be used for drag racing only, which is what Alex3000gt is implying, it may be able to slow a car down at the end of the strip once every 30 minutes so it has time to cool (which is why it can be dangerous to rely on these on the street). But even still, you're closer to the safety threshold of how much stopping this can support. If you go faster and faster at the end of the strip you need more and more energy absorption that the rotors are responsible for. At what point will the rotors be heat soaked and useless for stopping? I don't know the answer to that, but there is a nice safety factor with larger rotors so you don't need to worry about it.
I'm not posting this to start an argument, but I would like it to start a discussion. I am concerned that people will purchase these without concern for the sacrifice they make when they buy them. Yes there are benefits, but I think you can get the same benefits from other modifications. What are your thoughts? Is there a reason these points haven't been discussed yet? If you want these is it because they look cool or because you understand the benefits, along with the drawbacks, and still consider it a good investment?
Stu
green-lantern
06-05-2011, 03:47 PM
All good points Stu, I honestly don't see any reason to worry about normal street use though. These might not be a good choice for road course racing but they are probably better/safer than 80-90% of brakes on the street today.
green-lantern
06-05-2011, 03:52 PM
cjbyron, how close is this car to be ready for the track? You wouldn't happen to be taking it to NG would you?
cjbyron
06-05-2011, 03:55 PM
@Stu , Your mistaken. This was not posted to discuss or solicit criticism. It was posted to inform others that this company will have their products available for the 3S platform. The same producst that many other high performance/racing vehicles enjoy.
Don't be mistaken that these are some new design. They are not. They have been stopping top NHRA funny cars, and top fuel cars for quite a while. Quite the proven product(s).
The decision on these brakes was made to allow for 15" wheel fitment and still have a top performing brake system. Research and decisions by some are not done on a forum but with experts and companies that do it for a living. Such as the BrakeMan company. So after almost 6 months of working with a professional brake company, one with a proven racing history and big name cars using their products, there is a 3S specific bracket and kit to be available. Certainly not for everyone but for those serious into drag racing and wanting the best in quality and performance.
As for cost - such systems are expensive yes. But cost is relative and not every project is a street project looking to shave corners on price. So not a big deal proportionally for some people. And yes, these are drag racing brakes. Nothing has been implied otherwise and it's even in the title of the thread. If you wanna road course, uhh, yeah, these certain aren't for you. They are VERY specific in their application and use. Nothing has been implied or stated otherwise.
Perhaps you are confused as to the topic or purpose of the thread. Not everything is a discussion or even warrants it. If you want to discuss brake dynamics, how to spend whatever, or anything else then open your own thread on brakes or race brakes theory or whatever suits you. Then those that desire to have a discussion on theories or opinions can join in. That as opposed to hijacking a thread to get into theory discussion, assumptions, or trying to find fault with others.
I hope the above has explained it for you.
For others that are looking for a drag racing brake application that is lightweight, proven performance, and fits out cars - here you are.
cjbyron
06-05-2011, 03:59 PM
green-lantern ; no sorry, we aren't going to NG. Too many other irons in the fire.
Kinda off topic but it is pretty much ready. We are going to the dyno again this month for launch control settings and to push the hp up some more. Waiting to order some 15" custom wheels. Then, weather cooperating (we are in Seattle area remember, lol) we'll be at the local tracks.
green-lantern
06-05-2011, 04:32 PM
Yeah sorry for the OT, it just popped in my head that I'd really like to see this car in person. Being that you live across the country I doubt I'll see it unless you guys bring it to NG some time. I'd like to see the vids when you take it to the track.
OK back to topic :D
cjbyron
06-05-2011, 04:44 PM
Yeah sorry for the OT, it just popped in my head that I'd really like to see this car in person. Being that you live across the country I doubt I'll see it unless you guys bring it to NG some time. I'd like to see the vids when you take it to the track.
OK back to topic :D
No problem. We'll do our best for some videos this summer.
Maybe you'll find yourself in the northwest some time! If so look us up. :)
cjbyron, i think stealthystu was primarily responding to hellbringer's inane innuendo that these brakes were sufficient for street use. these are great for drag racing. i would not recommend anyone use them for anything other than drag racing. the power is there; the stamina is not. it is as simple as that. hellbringer talks down to everyone like he's out to prove that his ego eclipses kanye west's. whatever. i'm just not going to sit here and let hem make stupid implications that might lead others astray. if stu hadn't done it, i would have.
again, thanks for bringing this product to us. in for results.
/hijack
Teotwawki
06-05-2011, 06:58 PM
cj, You've put some good information out about a product and such but this IS the place to discuss it. The rules of the forum clearly urge us to use a current thread rather than posting a new one if possible. It's not like he presented a brainless argument such as "these little brakes couldn't stop a tricycle".
It's a forum, everything on it is open for discussion or criticism, unless the "elders" say otherwise. That is, as long as it's done in a respectful manner.
HellBringer
06-05-2011, 07:18 PM
cjbyron, i think stealthystu was primarily responding to hellbringer's inane innuendo that these brakes were sufficient for street use. these are great for drag racing. i would not recommend anyone use them for anything other than drag racing. the power is there; the stamina is not.
So, wise one, tell us all how many cars you've personally driven and/or ridden in with a Strange Engineering (or similar, such as the ones this thread) light weight drag racing brake setup? Are you basing your 'recommendation' on your personal experience, or just ignorant conjecture and assumptions? I've ridden and driven a few - you? Please give us your thoughts based on your personal experience.
These are obviously a drag racing brake setup. You wouldn't put them on your daily driver, or try take laps around your local AutoX course with them; I think that's pretty self explanatory. However, they are more than sufficient for 'normal' driving in good conditions if need be, like driving a reasonable distances to/from the drag strip. Thus, my initial response to "I just hope that anyone who installs these also trailers the car to and from the track.". Why do I know they're sufficient for the aforementioned? Because I've done it. You?
BTW, Craig knows me rather well. I turned wrenches for a short time on the car mentioned in this thread. ;)
green-lantern
06-05-2011, 07:45 PM
These are obviously a drag racing brake setup. You wouldn't put them on your daily driver, or try take laps around your local AutoX course with them; I think that's pretty self explanatory. However, they are more than sufficient for 'normal' driving in good conditions if need be, like driving a reasonable distances to/from the drag strip.
I agree, these brakes might heat up quicker but they will also cool quicker. (1) for obvious reasons with the design of the rotor (2) since the pads don't really touch the rotor when not in use it will stay cooler before you use them. I've done some testing on our brakes and they will get pretty warm even when you aren't using them because the pads are touching when just rolling down the road.
I'm not an expert on these brakes but I don't see any reason to worry about normal driving around town.
One thing about drilled rotors I'd like to chime in about is I have found better braking every time I've used them. Back when I was big into rail buggies we would drill rotors ourselves and it worked great. We were also dealing with mud and water though. They would wear out pads quicker but it definitely stopped quicker.
Alex3000gt
06-05-2011, 08:36 PM
Actually, this IS the time and place to discuss this product. If you are looking to bring this product to market we have the right to question the product's legitimacy and safety.
The fact that you are trying to squelch dissent is quite troubling.
You showed us a substantially smaller and lighter brake system. Whenever dealing with a system that involves the safety of the vehicle occupants, like brakes, I think a serious discussion needs to take place. The fact that you are championing a braking system which performs worse than stock for daily driving is not responsible. You are a car enthusiast, not an engineer. An engineer's top priority is safety, followed by providing a quality product.
Until this brake setup has been thoroughly tested and compared to the OEM setup through rigorous testing and validation, I recommend NOT using it for daily driving. To give this system a seal of approval for daily driving based on "it felt as good as stock" or "I have this on my car" is completely irresponsible.
As a braking setup for a purpose built drag car when the brakes are used once then given 20 minutes to cool - go nuts.
HellBringer
06-05-2011, 08:52 PM
blah blah blah worthless drivel blah blah blah
LOL
Have you read and absorbed any of the words on the screen in this thread - maybe even just the thread title? Where has anyone said these were suitable for daily driving? These brakes are purpose built for drag racing only! Would they be sufficient for minimal street driving? Yes. Are they designed and intended to be used for anything other than drag racing? No. Jeeeeeeeeezus....
Brake setups like this are nothing new -- they've been used on dozens of other platforms for years.
cjbyron
06-05-2011, 08:55 PM
I know no such such "rule" that encourages hijacking threads or taking them off topic. I also don't know why so many threads have to turn into shitstorms because someone thinks they know better without any direct experience or basically just conjecture. Anyway,,,,getting off topic,,ha! (pun intended)
If someone wanted a drag racing brake setup like this but also wanted to street drive then just ask the question instead of making conjectures. Then it could be answered by A) people that have direct experience or B) the company itself can answer. Not someone that is guessing and making assumptions.
If someone wants a similar setup (Drag Race Brakes, Lightweight, Zero-Drag), this is an option that is now available to 3S that wasn't before. Period. They are not for everyone. They are not "new" or some small unknown company in a garage somewhere. They are made by one of the recognized leaders in racing brake systems. While there are several companies out there like them there isn't a whole lot that make them for our cars.
Many people I spoke with personally that have them have stated they are the best brakes they've ever had on their car for stopping power at the drag strip. That's what I was interested in and met my needs. That info helped me make my decision on going with these vs. another brand/style. It was not taken lightly because A) it is a serious safety concern B) they are expensive and C) it took months of measuring, retrying parts, brackets, spacers, etc. So it should be a fair assumption that a lot of research and prior work was done well before they landed in this forum in photos and fitted onto a 3000. Seriously.
So if someone wants a setup like this on their street car, by all means look further into things that are important or applicable to your situation if not a dedicated drag car. Ask questions of the manufacturers and of people that have personally used and experienced them. Of course those that actually use things like these brake style systems already do just that so there's nothing I am saying that they don't already know.
I'm certainlty not squelching anything Alex3000gt. You are totally mistaken and confused. I don't care if someone else uses them or not. Totally their decision. Of which again, those that would use this type of system already does their homework and not on a forum. I am not bringing ANYTHING to MARKET. I worked with the company to make brakes for ME. So the work to fit them has been done. I have no horse in this race. I have no personal interest if you frickin use them or not. These have been engineered already by professionals.
Let me help out those that are confused:
The F1, F3 calipers and revolution brakes have already been around for years and engineered/built by a professional brake company.
I am not a brake company. I am an end user.
The NEWS here is that the hat depth, spindle measurements and bracket size plus spacer requirements is now known for the 3S. Whereas before they had nothing for our platform. Now they do.
Make more sense to you now? :eyeroll:
R/T93
06-05-2011, 08:55 PM
Alex.... brakes like these are on thousands of cars across the country that run MUCH faster than the NW3S drag car will ever run. not saying the NW3S drag car wont be FAST AS F, but there are thousands of cars in the 7's and 6's and 5's with brakes like these.... They are completely adequate for drag race braking, and they wont need 20 minutes to cool down. Heat only really effects the pad though, as far as braking is concerned, the iron can normally take more heat than the pad, and these pads will be suited for the temperature attained for a 3500+ lb car stopping from 160+ ONCE.
As for Cjbyron's suggestion to take it to a different thread, thats just how he prefers, things stay VERY on topic on his NW forum, (mostly :) ) everyone follows the rules there so its just what hes used to.
Also, Craig, do these brakes require a touch of the pedal before you can brake? A friend of mine has a Strange Engineering setup and she has to touch the pedal and let off again before really applying the brakes, it unlocks the zero drag. It made sense to me, there is a mechanism that keeps the pads off the rotors, and has to be disengaged for the brakes to work, really scared her the first time he went down the track, panic'd and just by chance let off and hit the brakes again, thats how they were designed.
green-lantern
06-05-2011, 08:55 PM
With all due respect Alex, you were already condemning them for any road use what so ever not questioning the safety.
Alex3000gt
06-05-2011, 09:10 PM
LOL
Where has anyone said these were suitable for daily driving?
You.
be sufficient for the rigors of 'normal' driving...!? :rolleyes3:
There is no need to be insulting when quoting me. I understand that the anonymity of the internet may allow you to act rudely, but understand there is a person on the other end attempting to have a grown up, rational discussion. See the below posts for examples of how to disagree with someone but still be respectful.
Perhaps you were not clear enough in your original post, it appeared at the time you were advocating using these for "normal" (ie daily) driving.
Alex.... brakes like these are on thousands of cars across the country that run MUCH faster than the NW3S drag car will ever run. not saying the NW3S drag car wont be FAST AS F, but there are thousands of cars in the 7's and 6's and 5's with brakes like these.... They are completely adequate for drag race braking, and they wont need 20 minutes to cool down. Heat only really effects the pad though, as far as braking is concerned, the iron can normally take more heat than the pad, and these pads will be suited for the temperature attained for a 3500+ lb car stopping from 160+ ONCE.
As for Cjbyron's suggestion to take it to a different thread, thats just how he prefers, things stay VERY on topic on his NW forum, (mostly :) ) everyone follows the rules there so its just what hes used to.
Also, Craig, do these brakes require a touch of the pedal before you can brake? A friend of mine has a Strange Engineering setup and she has to touch the pedal and let off again before really applying the brakes, it unlocks the zero drag. It made sense to me, there is a mechanism that keeps the pads off the rotors, and has to be disengaged for the brakes to work, really scared her the first time he went down the track, panic'd and just by chance let off and hit the brakes again, thats how they were designed.
I agree with you, I can see these as being very beneficial on a drag car. Thanks for clearing up my confusion with CJByron.
With all due respect Alex, you were already condemning them for any road use what so ever not questioning the safety.
This is true, my concern was that people would not understand that these were "track only" brakes. I really wanted to stress that.
HellBringer
06-05-2011, 09:29 PM
LOL at the holier than thou act. Give me a fuckin' break, kid. :lol7: The title of the thread clearly says "Drag Racing Brakes". I'm sorry if you made an assumption off of my initial statement, which I've clarified in detail twice since. Maybe you should try absorbing what's been said for a few minutes before crafting a retort. You clearly don't have anything constructive to add this thread other than your assumptions and conjecture. You act like these brakes are a completely foreign concept, yet they've been around for years - just not for the 3/s.
You're making assumptive guesses based off of a few pics while ignoring the people that have actually witnessed them in action.. At least on other platforms... And you think your opinion is valid on the matter? :rolleyes3:
cjbyron
06-05-2011, 09:39 PM
Also, Craig, do these brakes require a touch of the pedal before you can brake? A friend of mine has a Strange Engineering setup and she has to touch the pedal and let off again before really applying the brakes, it unlocks the zero drag. It made sense to me, there is a mechanism that keeps the pads off the rotors, and has to be disengaged for the brakes to work, really scared her the first time he went down the track, panic'd and just by chance let off and hit the brakes again, thats how they were designed.
I can't personally answer that as the ones on the car are not even bled yet. It was only early yesterday that we got the last shipment back from the factory and fitted. (I posted up because I know there's been quite a few people waiting to see them done and installed). But I think you are correct that these work the same way and have heard that from several users. IIRC Jeff B. w/ English Racing said this same thing on his 8.x second Eclipse (surprised him). Austin at STM mentioned in here they use them on their EVO so maybe he can comment on that for sure.
Alex3000gt
06-05-2011, 09:42 PM
LOL at the holier than thou act. Give me a fuckin' break, kid. :lol7: The title of the thread clearly says "Drag Racing Brakes". I'm sorry if you made an assumption off of my initial statement, which I've clarified in detail twice since. Maybe you should try absorbing what's been said for a few minutes before crafting a retort. You clearly don't have anything constructive to add this thread other than your assumptions and conjecture. You act like these brakes are a completely foreign concept, yet they've been around for years - just not for the 3/s.
You're making assumptive guesses based off of a few pics while ignoring the people that have actually witnessed them in action.. At least on other platforms... And you think your opinion is valid on the matter? :rolleyes3:
PM sent.
So, wise one, tell us all how many cars you've personally driven and/or ridden in with a Strange Engineering (or similar, such as the ones this thread) light weight drag racing brake setup? Are you basing your 'recommendation' on your personal experience, or just ignorant conjecture and assumptions? I've ridden and driven a few - you? Please give us your thoughts based on your personal experience.
These are obviously a drag racing brake setup. You wouldn't put them on your daily driver, or try take laps around your local AutoX course with them; I think that's pretty self explanatory. However, they are more than sufficient for 'normal' driving in good conditions if need be, like driving a reasonable distances to/from the drag strip. Thus, my initial response to "I just hope that anyone who installs these also trailers the car to and from the track.". Why do I know they're sufficient for the aforementioned? Because I've done it. You?
BTW, Craig knows me rather well. I turned wrenches for a short time on the car mentioned in this thread. ;)
get me a weight on the n/a brake rotors compared to these and get back with me. i know for a fact that the n/a rotors can't handle the heat; and i've gone through two brake refurbs because the stock n/a brakes aren't worth a shit as a heatsink. if you're suggesting that replacing THAT setup with a rotor that weighs less will somehow IMPROVE extended brake response, i've got some oceanfront property in death valley i'd like to sell you.
either you've got pads on there with an operating temp well beyond "normal use" limits; or you're going to start seeing fade. either way, i wouldn't take it on the street. *edit* and if you did take it on the street, you'd probably have to baby the shit out of it (engine braking, coast braking, low-speeds, etc).
p.s.
i've got 7 years of DD experience behind the wheel of a fwd 3/S. the AWD's are only going stress brakes even more.
HellBringer
06-05-2011, 09:58 PM
PM sent.
Please keep your whining out of my Inbox. Thanks.
IPD -- Again, all completely worthless conjecture on your part. Perhaps you should re-read all of what I posted - slowly - and then do some research to better educate yourself. If you think these brakes are less capable of stopping a near-full-weight car going 150+ MPH than NA 3/s brakes then you have no business doing anything in this thread other than keeping your mouth shut and hoping you learn something.
R/T93
06-05-2011, 10:09 PM
They are proven to work, your argument is invalid. Your cars apparently didnt have good enough brake pads. I had had my TT brakes to 1200+ degrees and they were still FINE, if the pad can take the heat, your brakes wont fade.
UTRacerX9
06-05-2011, 10:21 PM
Fun thread. Looks like people seem to be hung up on whether a person could use these for dual use... Daily driving, and the track. Well, that is not their intended purpose, plain and simple. The arguments regarding how much smaller a heatsink these rotors are compared to stock brakes are valid, I would not trust rotors like these for a long cross country drive through inclined mountain terrain... But that is not what they are for. Driving to the track would be fine. These brakes are intended for track cars only, but that doesn't mean they won't handle the few miles to the track and back.
Personally, I would love to see these in a 13-14" size rotor. Bigger than stock, and probably still a bit lighter, and could be used for anything.
HellBringer
06-05-2011, 10:32 PM
Sorry to keep jacking your thread, Craig, but for the uninformed, here's a good real-world example of a 3500lb car with a very similar setup (Strange Engineering).
http://2jzpower.com/pictures/Joel_Grannas/SUPRA/169large.jpg
At the track:
YouTube - ‪Joel Grannas Supra - PRP Opening Day 2011‬‏ (http://youtu.be/vjexsfkm67Y)
On the street:
YouTube - ‪Joel's 1000whp Supra‬‏ (http://youtu.be/R7PQz5V9YNY)
http://youtu.be/FGt4s2rxYPk
The former owner of that car ran consistent low 8's (though stopping with the assistance of a chute) and daily drove the car to work.
And for redundancy - these are NOT recommended for the street. But they can be street driven.
cjbyron
06-05-2011, 11:01 PM
They make other applications such as street product
The Brake Man.com - StreetProducts (http://www.thebrakeman.com/streetproducts)
Super street and hurricane rotors
The Brake Man.com - Street Rotors (http://www.thebrakeman.com/street_rotors)
and SCCA / NASA Racing
The Brake Man.com - SCCA / NASA (http://www.thebrakeman.com/scca___nasa)
Autocross/Track Pads
The Brake Man.com - OEM #3 Pads (http://www.thebrakeman.com/oem__3_pads)
and so on.
And now that they have all the measurements and spacer/bracket technical info they can adapt any of these to the 3S platform for the customer. The company has been really great in working with to get what we wanted.
So while this thread was just intended to announce the drag race application and system their other products are also much more available to 3S owners than before.
Please keep your whining out of my Inbox. Thanks.
IPD -- Again, all completely worthless conjecture on your part. Perhaps you should re-read all of what I posted - slowly - and then do some research to better educate yourself. If you think these brakes are less capable of stopping a near-full-weight car going 150+ MPH than NA 3/s brakes then you have no business doing anything in this thread other than keeping your mouth shut and hoping you learn something.
hellbringer, how about you let some air out of that jupiter-sized ego of yours so that you can actually be troubled to perform some basic reading comprehension yourself?
i said NOTHING about stopping power. i have been referring to brake STAMINA this entire time. there's no doubt in my mind that these brakes will stop a 3/s; even a 4,000 one doing 150mph+. these brakes remind me of the brakes used on airplanes. airplane brakes are teriffic for single-use...but that's it. granted, this design is substantially different (caliper's aren't a full circle, etc)--but the application use is the same. maximum stopping power; not repeated use over a short period of time.
what i've called into question is your baseless conjecture that said brakes could be used on the street. unless you, yourself have heavy experience in this vein; don't start throwing spears. i know for a fact that the n/a brakes SUCK as a heatsink--even during normal dd usage. if these rotors weigh less, they'll perform even more poorly as a heatsink. *edit* i don't see anywhere in your "links" where it's showing that poopra as having these brakes installed--much less installed at the specific point in time when he made those vids of "running on the street". that's nice and all. let me know how that works out for you in stop and go traffic--because 90% of us would have to wade through 15-30 minutes of that before we could get anywhere near a dragstrip.
for the umpteenth time:
great for drags...risky on the street.
Alan92RTTT
06-06-2011, 12:34 AM
We are all adults here. Please make the effort required to act like it.
We are all adults here. Please make the effort required to act like it.
if i need to delete part of my post, just say so. i tend towards caustic rhetoric when i need to get through to an individual whose ego is so large it has orbiting defense platforms.
zelstin
06-06-2011, 01:57 AM
That rotor probably returns to normal operating temp 3x faster then a stock rotor. Thermal inertia works both ways when modeling "street" use.
cjbyron
06-06-2011, 02:17 AM
hellbringer, how about you let some air out of that jupiter-sized ego of yours so that you can actually be troubled to perform some basic reading comprehension yourself?
what i've called into question is your baseless conjecture that said brakes could be used on the street. unless you, yourself have heavy experience in this vein; don't start throwing spears. i know for a fact that the n/a brakes SUCK as a heatsink--even during normal dd usage. if these rotors weigh less, they'll perform even more poorly as a heatsink. *edit* i don't see anywhere in your "links" where it's showing that poopra as having these brakes installed--much less installed at the specific point in time when he made those vids of "running on the street". that's nice and all. let me know how that works out for you in stop and go traffic--because 90% of us would have to wade through 15-30 minutes of that before we could get anywhere near a dragstrip.
for the umpteenth time:
great for drags...risky on the street.
No shift key or typing too fast? LOL
Rotor weight does not equate heat dissipation. One is not tied to the other. Ridiculous relation. Weak.
You are not a brake expert, brake engineer, or anything remotely like it. Stop acting like you know all about it. You do not. You make suppositions based on non-facts. Take your own advice given to hellbringer perhaps. Let it go man.
Does anyone here really still give a damn (or ever did) about their possible performance on the street? If it is then let's ask a brake expert and see what they say? I don't think there's anyone here that cares for real, only as an exercise for trolling or pitching others crap.
For everyone else that might be wanting a kick ass drag brake setup - I hope this info has helped give you some added choices as well as a quality option to the ever dwindling support for our cars.
jessecain1
06-06-2011, 02:37 AM
Sad seeing all this bickering when all Craig was trying to do was introduce a new product to the platform that he went threw the trouble of getting out there. You guys should really just leave the thread and perhaps post a new one else where if you want to discuss braking dynamics. It really only takes away from the goal here.
looks good from the pictures, can't wait to check it out in person on the 18th.
-jesse
No shift key or typing too fast? LOL
Rotor weight does not equate heat dissipation. One is not tied to the other. Ridiculous relation. Weak.
You are not a brake expert, brake engineer, or anything remotely like it. Stop acting like you know all about it. You do not. You make suppositions based on non-facts. Take your own advice given to hellbringer perhaps. Let it go man.
Does anyone here really still give a damn (or ever did) about their possible performance on the street? If it is then let's ask a brake expert and see what they say? I don't think there's anyone here that cares for real, only as an exercise for trolling or pitching others crap.
For everyone else that might be wanting a kick ass drag brake setup - I hope this info has helped give you some added choices as well as a quality option to the ever dwindling support for our cars.
i'll cede the point to you. after all, this is your thread. please ask abram to keep his post #27 comments to himself.
HellBringer
06-06-2011, 09:03 AM
snip.
Do you just disregard what everyone has already said multiple times and just make stuff up as you go? Where has anyone said they were capable of, or designed to handle multiple high speed stops in a row? What part of 'normal' driving implies that? Stop and go driving is typically not comprised of 0-100-0 sprints, so yes, these would be capable of 'normal' driving. Are they ideal for that? Again - NO! But they can be reasonably and safely driven on the street if desired. You're making these wild assumptions on your own.
As for the Supra I posted links of - as I've already said - it has a Strange Engineering (look it up) brake setup, which is nearly identical to the Brake Man setup. If you don't believe me - look it up Darin Dichiara - he's the former builder/owner of that car. I posted it as an example of a car that can easily stop from 155+ on the track in a short shutdown area and be driven on the street. Case in point. You may not like my delivery, but I always try to stick to the FACTS and interject with my own personal first hand experience. You? Not so much....
Since you danced around my inquiry, I'm assuming you've obviously never driven or even seen a car with this type of brake setup. So, let me repeat myself: "You're making assumptive guesses based off of a few pics while ignoring the people that have actually witnessed them in action."
Austin@STM
06-06-2011, 09:49 AM
Yes they are fine for street driving. We developed an STI specific kit last year specifically for a customer that street drives his car, using these same rotors and calipers. As well as our shop Evo i posted the pic of earlier in the thread, thats seen a couple good cruise nights each year running with these brakes.
Also just a note about the quality of The Brake Man company. When install the STI kit we were up late finishing a couple cars before we left for the DSM shootout in the morning. Unfortunately a casting i believe they called it ( just a small piece on the end of the caliper) popped out while we were bleeding the brakes. Saturday morning we call Brake Man and explain the problem and they say they'll take care of it ASAP. Well what do you know, wee get back to the shop Monday morning and there is a package there with 2 brand new rear calipers. They sent them completely free, to make sure the other rear didnt have that issue. We swapped them out, sent the old ones back.
That is the only issue we've ever had with any set we have installed or sold over the past couple years, and i dont think a company could handle it any better. So anyone who questions the price consider what your getting in quality of parts, as well as the company thats standing behind them. Worth every penny.
-Austin@STM
http://www.streettunedmotorsports.com/z/blee/blee6_8_28_10.jpg
green-lantern
06-06-2011, 12:39 PM
Thank you Austin!
Teotwawki
06-06-2011, 05:52 PM
So the main draw to this package is the reduction in weight am I correct?
cjbyron
06-06-2011, 06:05 PM
Reduction in weight is a big advantage but the main draw for me was to get a high performance set of brakes that will also allow 15" wheels to fit. They also stop the car way better than OEM brakes according to every user I talked to.
So:
less weight (substantially)
small (fit 15" wheels over)
high performance (stopping power)
mb3000
06-06-2011, 07:10 PM
It's always good to see more after-market options for the 3/s. Nice work cj!
Austin@STM
06-06-2011, 10:52 PM
this is just about the best money can buy right here when it comes to drag brakes. only thing better would be a set of carbon rotors, but those are $$$$$$$$$$$$$$$$$$
MeTarzan
07-04-2011, 10:01 PM
I cant belive how many people are stuck on the fact of streetablity compaired to the true perpous of the post. Unsprung weight is the hardest thing to remove from our cars and yeilds some of the best time cutting benifits and this is giving us close to 60# in a complete package..... That is just AWESOME!!!
My bestfriends 95 Eclipse runs the Brake Man setup for a few years now (not just a track car) and they def put a stop to his car from 150+, has only had to use the shoot a few times on really short runoffs.
cjbyron
10-15-2012, 07:45 PM
I referenced this in another post and noticed I didn't update this one when we tested the brakes out later that year.
We took the car out and did 5 back-to-back 0-130+ mph to a dead stop and there was zero fading. These brakes performed way better than OEM 2G brkes as far as fade and stopping power. They were definately hotter than hell each time (heat actually visible at the rotors) but the stopping ability was always more than we needed for our goals. These really perform as promised. Couldn't be happier.
glad to hear it. sounds like they're a perfect match for your car.
fullracegt
10-17-2012, 02:14 PM
That's awesome!!
cjbyron
10-17-2012, 02:27 PM
One of the things not done was fabricate up a new e-brake system. Not a big problem considering the car use but I am the sort that doesn't like to ever leave a car in gear. A safety thing.
Brakeman has ebrake calipers so it's just a matter of bracket design mostly.
So that is on the "to do list". Looking at maybe doing an electric e-brake setup (no cables). Maybe a good project for this winter.
92pearltt
10-17-2012, 10:44 PM
why don't you just hook up a hydraulic e-brake inline with the rear brakes, super simple.
anyonebutme
10-17-2012, 10:57 PM
why don't you just hook up a hydraulic e-brake inline with the rear brakes, super simple.
Because all that would do is pump the fluid into the main brake reservoir. You can't use a check valve, either, without a continuous return system like Rally cars have.
cjbyron
10-17-2012, 11:06 PM
why don't you just hook up a hydraulic e-brake inline with the rear brakes, super simple.
Because I do not want the rear brakes to be under any constant hydraulic pressure 24/7 while parked or whenever. The brakes are for solely stopping the car not parking. I want them at zero release unless they are being applied to stop the car. It may indeed work but IMO is not the way to handle it. We did briefly consider it (we have a line lock made just for this sort of thing - hydraulic brake lock solenoid) but we discounted it. Plus, considering the hydraulic plumbing of the rear and front brake lines it's not quite that simple to do just the rears or just one (as was mentioned in the post above by anyonebutme).
I consider the brakes to be a serious safety item, especially in this application. And even though the front brakes do most of the heavy lifting the rears are also part of stopping the car at the end of the track. I don't want the parking brake to be mixed in with the car brakes in this application or introduce any additional failure potentials to being able to stop the car.
So that's the main reason(s).
They make a small caliper just for the parking brake use. Just have to get around to fab'ing the mounting bracket. That's the right way to implement a parking brake I think.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.