PDA

View Full Version : help please!



criner
05-25-2011, 07:58 PM
What problems would i run into swaping a engine from a 93 n/a in to a 94 n/a.

x2xtreme360
05-25-2011, 08:03 PM
None.

criner
05-25-2011, 08:06 PM
thanks x2xtreme, no one on the other site really wanted to help just, saw an opportunity to dicks. Just know it went from obd to obd1.

x2xtreme360
05-25-2011, 08:12 PM
The OBD type doesn't matter. You could use a 99 engine in a 93, a 93 engine in a 95, or a 95 engine in a 99.

The harness and PCM are what make up the OBD system, not the engine itself.

The only real difference between the two motors are where the cam sensor mounts on the 91-93 and cam and crank sensors mount on 94+... but that's just the mounting of the two sensors. Engines are still interchangeable. Both are 2 bolt mains as well.

Emilie@GZP
05-25-2011, 08:15 PM
The only real difference between the two motors are where the cam sensor mounts on the 91-92 and cam and crank sensors mount on 93+... but that's just the mounting of the two sensors. Engines are still interchangeable. Both are 2 bolt mains as well.

corrected for year accuracy.

x2xtreme360
05-25-2011, 08:17 PM
corrected for year accuracy.

Oh, did they switch it over in 93+? I thought it was 91-93 for some reason. Thanks for the correction.

Emilie@GZP
05-25-2011, 08:45 PM
93+ area 4 bolt, blah blah blah. 91-92 are the oddballs.

x2xtreme360
05-25-2011, 08:48 PM
93+ area 4 bolt, blah blah blah. 91-92 are the oddballs.

All NA motors are two bolts.

Emilie@GZP
05-25-2011, 08:50 PM
didn't notice the first post said N/A, but everything else changed in 93 anyway.. forged crank, the sensors, etc.