View Full Version : N\A Intake Disect.
Blackmount
05-23-2011, 09:43 PM
So I was bored and started pulling apart my intake from my other motor.
found this.
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/247272_221089657919320_100000548612455_897237_2274 379_n.jpg
I was shocked because i was not expecting it. I assume its the same thing pretty much as the Cyclone intakes, except computer operated and not Vacuum\Boost operated.
the Valves open up at X Rpms for increased air flow for extra hp, and stay closed to conserve gas? could these potentially be tuned? like change the RPM they open at?
stealthee
05-23-2011, 09:46 PM
Thats the VIC's. It directs air thru the short runners below 3000, and above 3000 rpm opens and directs air thru the long runners. I may have that backwards.
Either way, you need it. I dont think "tuning it" would help. If you try to do away with it, you will lose power.
Blackmount
05-23-2011, 09:48 PM
do the TT manifolds have this? what about the aftermarket manifolds for our cars?
anyonebutme
05-23-2011, 09:49 PM
You have it backwards, but whatever, lol.
edit: Not on TTs.
stealthee
05-23-2011, 09:54 PM
do the TT manifolds have this? what about the aftermarket manifolds for our cars?
No, only the NA DOHC's. TT's dont need it. You will lose power on a DOHC NA without it
You have it backwards, but whatever, lol.
Yeah, as I typed it I was second guessing myself, thats why I said what I did. :lol:
GTwizard
05-24-2011, 02:58 AM
This type of indution works great for our NAs. It was developed and bult by Mikuni. Good stuff there. The longer route and narrow runners will speed up air flow to enhance low RPM responce. Than begin opening around 3000 depending on engine load. If no load at all, they will open around 5000 RPM and this is someting you can check and should check. It's all in the service/repair manual. How to check, what to check, and when to check. Most of those that I find are not working is because they never get the exersize they need and become stuck. I have had customers that shift before the bodies ever, ever open. Driving like this will load the cylinders as well. 2nd and 3rd gear pulls are a good way to exersize them. Good engine load there. This will help keep them operational and help keep the crap blown out. I also know that most will assemble these incorrectlly. So follw instruction when putting it back together. You should also note that each of the runners have air horns or Velocity stacks at the beginning of each runner. This too is by design. Mikuni missed nothing when they put this system togther. Hats off to Mitsubishi for going with the best.
tt's don't have that because the turbos shove air in there as fast as it will go regardless. :)
Blackmount
05-24-2011, 10:10 AM
this could explain why my car chokes at around 3.5k under a load (usually when the motor is still warming up, like first start of the day). this may not be functioning properly...hmm i shall inspect!
GTwizard
06-01-2011, 10:35 AM
Full opperational explenations and testing of the system are all explained in detail in the service/repair manual, as well as assembly and set up instructions.
There are applications were you can go with out. The VR4s don"t need this system as they have longer runners for the low end torque. And don't need the shorter fat runners as tey have the turbos to make up for the restrictions long runners create at higher engine rpms. That being said, both VR4 and NA have good drivability at low RPM/no boost appications. For more air volume requirments, the NA's have short large runner that open up and the VR4s have turbos.
Blackmount,
Under "no load" applications, the induction bodies will not start opening untill around 5000 RPM. But under a full load they should begin opening around 3000 or so and fully open by 3500.
Hope this helps.
Below, you will see VR4 runners on an NA application. We make up the the short coming of the longer VR4 runners by using a 2 liter plenum and "a bunch" of other goodies. One of them being true ram air.
http://i498.photobucket.com/albums/rr343/GTwizard/S6305048.jpg
http://i498.photobucket.com/albums/rr343/GTwizard/S6305051.jpg
http://i498.photobucket.com/albums/rr343/GTwizard/S6305053.jpg
http://i498.photobucket.com/albums/rr343/GTwizard/S6305092.jpg
During race application, the air filter is removed and the intake plumed dirrectly to the hood scoop Via 4 in. dia. piping.
Blackmount
06-01-2011, 11:42 AM
Isn't that the N\A that put down 222whp? is it yours?
GTwizard
06-01-2011, 02:07 PM
Yes. This is the one, it did 229. I may change to the NA runners later this year, just to see where the power band ends up and to see what kind of numbers I can put down above 7000 RPM.
My torque and hp levels never drop on the dyno chart till rev limit kicks in. 2 years ago I ran with no upper ruuners at all. Just velocity stacks only.
That was a mistake. Only made power from 5600 to 7200. That made for an extreamly dificult week at NG09. Had to leave the foot on the floor at all times. grrrrr.
The fun part is the effects of the ram air. And will never show on the floor dyno. But your Butt Dyno will tell you 229 is a scam. And those numbers are with an NA ECU.
Now if I just find to tune it, I might do some good this year at NG.
Blackmount
06-02-2011, 12:48 PM
I'm sure the car feels nice. When you gonna throw in the 11:1 or even 12.5:1 pistons? (if you have many E85 stations around you)
Theoritically those would bring in a decent amount of hp.
I would like to see a Car on the dyno with 3SX's high compression Pistons.
GTwizard
06-02-2011, 01:38 PM
Me tooooooo! This is our test bed. So for the most part we have only improved breathing on a stock block. And no!!! This is NOT a nice car to drive. That's like saying a busting bronko bull is a nice ride. LOL.
This car could never be a DD again. When your foot goes down, you had better be prepared to go to work. This is all business and no time to play. I hope the new LSD will help make this car a little easier to handle. Even in 3RD gear, at 80 MPH,
you are fitting the steering wheel from being ripped from your hands as the tires will auction off traction to the lowest bidder. What a blast.
I will end up building an other block. And will be 12.5 to one. I just don't know what size. I was wishing to stay true as I could to the 3.0. But, for the same money I could do 6G74 with 12.5s to1.
I will most likely retire the short block I have been running to a DD car fore some one. Has about 70,000 beaten miles on. A new set of bearing and should go an other 120 no prob.
I see Nelson has a 3.6 w/12.5s and alum rods for sale. $5,500 is a steal. Damn I what that. Been playin lotto for it. LoL. bet I could put the interior back in and still run well.
I will make race gas or something. I am not a fan of E85. Not for NA anyways. Use of E85 increases oil imports. not lessen them. Corn is the SUV of all plants. It takes so much nitrogen to grow corn, and they get that from oil you know.
So if we all used E85, imports of oil would have to go up. Funny how that works.
Blackmount
06-02-2011, 09:53 PM
You sir are my new friend lol. and yes I was impressed with the numbers you got out of your N\A. and I know what you mean about fighting the steering wheel. All I got done to my car is 3SX downpipe, No Cat, and a Intake, and Tires usually brake loose in 1st and start spinning alot, then 2nd gear is followed by alot of tourqe steer. it was like this before the "Mods" if you can even consider them that. Part of my problem tho I think is the harder rubber I have up front. not very gummy at all.
Glad to see some N\A guys in this generation of cars.
GTwizard
07-04-2011, 09:12 PM
Did good at the NG. Passed a few VR4s and stayed out front of most VR4s on the road course. Not just stock ones. There was 2 that I had no chance of catching. That makes me feel good. I was told by one driver that he had 15 lbs boost in the straits and there was nothing he could do about me passing him. An other asked if I had a single turbo or NOS. When I say all motor, I end up having to pop the hood. I don't think anyone believes I am still stock lower end. LoL.
Did good at the NG. Passed a few VR4s and stayed out front of most VR4s on the road course. Not just stock ones. There was 2 that I had no chance of catching. That makes me feel good. I was told by one driver that he had 15 lbs boost in the straits and there was nothing he could do about me passing him. An other asked if I had a single turbo or NOS. When I say all motor, I end up having to pop the hood. I don't think anyone believes I am still stock lower end. LoL.
what's the weight on your car? i understand you're making ~220fwhp. i'm curious to see what your hp/weight ratio is compared to vr4's. if you're 1000lbs lighter with nearly the same HP...i'm not surprised.
GTwizard
07-05-2011, 03:42 AM
I will weigh in again shortly. But I don't think I am under 2900. My HP is up a bit from last year. more like 250 at the wheels and the NT05 competition road course tires made a big dif. Alot less spinning. And the SOHC trans helped as well.
The new VR4 ecu was perfect. Best throttle responce ever.
stealthee
07-05-2011, 06:25 AM
SOHC trans is identical to a DOHC trans.
GTwizard
08-11-2011, 01:20 AM
I was sure they were the same as well. They have the same part #s from what I could tell. But than I was told different, and my RPMs did seem a tad higher in the first four gears. Called cherryhilltryplex and they told me the gears are for sure a little different. but final drive the same. I only asked about the 99 SOHC trans. Now I have a few trans I can pull apart and check for sure. If in fact they are the same, my car is doing much better than I thought.
stealthee
08-11-2011, 07:17 AM
The F5M33 has the same gearing across the board. I have had SOHC and DOHC transmissions in my car and the RPM's have not changed one bit from trans to trans.
Blackmount
08-11-2011, 06:29 PM
it's the final drive (aka the differential) that makes the difference. Hence why i can cruise comfortably at 75mph in 4th gear at about 4k rpms or less in my 3000GT( i don't have 5th gear) but in my laser and talon i was at about 4k rpms at the same speed in 5TH GEAR. Both cars have F5m33 Transmissions.
stealthee
08-11-2011, 08:12 PM
All the F5M33 have the same final drive even. A DSM FWD Turbo trans ie a F5M33 is identical to a 3s FWD non turbo trans down to the final drive. The only difference between the two is the casing.
The W5M33 (AWD) has a similar gearing, but much different final drive.
Blackmount
08-12-2011, 10:21 AM
then what is the massive difference in speed\rpm?
I know the DSM AWD tranny's come with several different differentials, this I have experienced first hand. Between the Galant VR4 trans, DSM trans, and Galant GSX trans. I believe they all are the same trans but some are fitted with different diffs.
Hans@GZP
08-12-2011, 03:15 PM
Wheel/tire sizes can have an effect on gear ratios. Taller tires (3/s cars) will net you faster speeds at lower rpms.
Blackmount
08-12-2011, 03:37 PM
16" rims with 215\55\16's on the 3000gt. had same size on Laser wheels and tires. Still huge difference. I'd have to have some REALLY SMALL wheels or REALLY BIG wheels. for that huge of a difference. 4th gear in the laser was 117mph.... 4th Gear in the 3000GT is...idk.... i've personally been 125-135 in 4th gear in the 3000gt with room to spare. It's been awhile tho so I don't remember exactly.. I'd like to top 4th gear out sometime.
stealthee
08-12-2011, 07:18 PM
1st gen speedos read notoriously high. at 135 shown, you were likely only going 120.
Also stock tires on a 3000GT are 225/55. The 215/55 are almost 1/2 shorter than stock and will make the speedo read even HIGHER.
I did the research. 3s FWD trans are the same from gearing to final drive as the DSM FWD transmissions. The AWD transmissions do have the shorter gearing/final drive though.
Blackmount
08-13-2011, 11:46 AM
okay well I'll make sure I compare the 3\s FWD Diff compared to my DSM FWD-Turbo Diffs when I rebuild my trans, and we can settle this debate.
stealthee
08-13-2011, 11:58 AM
The debate is settled for you
Tranny gear ratios for DSMs (http://vfaq.com/mods/Trannies.html)
Gear Ratios - 3SI Wiki (http://www.3si.org/wiki/index.php/Gear_Ratios)
dsmnoob91
10-18-2011, 08:51 PM
How do u know if it doesnt work? Mine is a dog right now and I unpluged it and it still feels like a dog so that leads me to be the problem
Blackmount
10-18-2011, 11:41 PM
Mine quick working randomly on me once. Turned out to be a wire for it split.
Symptoms:
Slow as shit
Gas mileage
Check Engine Light
dsmnoob91
10-19-2011, 11:25 AM
What wire And was it close to the harness?
Blackmount
10-19-2011, 01:46 PM
I think it was a green wire. And it was close to the the plug for the motor on the intake manifold
GTwizard
11-01-2011, 02:17 AM
Stealthy was on the money. I was wrong. Well the info I got was wrong. Trans are with out a doubt the same.
Thanks. I feel like an ass when I pass on bad info. My bad.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.