2011 NG Swap Meet - Parts Wanted

[Alan92RTTT]

Post your NG swap meet parts requests here.


Lets try to keep this thread just for parts wanted. If you have the part PM the poster.

[shmoo]

anyone have a set of 275 35 18 tires they'd wanna sell for a reasonable price. i need new tires, and i'm sorta trying to pick them up before the gathering, but...


_isiah

i also might like three or four uncut keys from random cars/3s's be it they are nice.

[rdmelton]

I'm looking for the trim piece (tan) that goes around the buttons on the passenger door. Mine is cracked so I'd like one in good shape with no cracks/stains/etc. It's for a 99 VR-4 but I think that any tan door trim is the same. I can supply a pic if needed.

[BaadVR4]

Anyone have a tan main carpet in good shape?

[VirginiaTechVR4]

I need a set of VLS shocks... 2nd gen.... Just need one really...

I also need a radiator overflow tank cap... Just the cap

Thanks

[Nationalmilkman]

Looking for the driver side under plastic for a '95 Stealth R/T

[$$$PIT]

If I don't find one before NG. I need one of these: http://www.3sgto.org/f63/wtb-2nd-gen-chromie-5115.html

[curt_gendron]

I'm looking for a driver's door in white. I'd want the pearl white that they used in 94,95. (maybe they even used it until 97+) I'd like it free of any dents or rust, but I suppose it could have some minor scratches or door dings.

Thanks.

[BaadVR4]

I need an ECS rear strut for a 95 VR-4.

[n2nsanity]

I need a set of VLS shocks... 2nd gen.... Just need one really...

I also need a radiator overflow tank cap... Just the cap

Thanks

i just installed an aftermarket overflow tank
if it proves to work ok for the whole trip there, u can just have the old one, i'll throw it in my bag of stuff

[futurevr4man]

i need a 2nd gen radiator fan (pass side fan, not the condenser fan)

i could also use a main fuse box with some of the harness so i can fix the rats nest the previous owner created

[BaadVR4]

I have a second gen passenger side fan, with wiring (but not the resistor). Since space is very limited (we're driving my wife's VR4), I would prefer to sell and ship it, but LMK. Thanks,
Milt

[Nationalmilkman]

Anyone have a spare set of tire/jack tools? Maybe two?

[pezcore]

I need a silver (SS would be nice) t-bolt clamp, 2.75" for the y-pipe coupler on the TB side. Who wants to sell one for a couple bucks?

[shmoo]

^^you lame ass! if i remember to bring one, you can have it. pretty much one to just fit over the throttle body?

my parts Wish list
toys include:
2g vr4 brakes
solid/polly motor mounts
any major tdo5 part
braided brake lines plus cash
a life supply of something that i want

_isiah

[pezcore]

haha I know, what a dumb part to need and I hate paying $6 shipping for a $2-3 part.

[n2nsanity]

i've got a complete set of cleaned up and painted stock mounts with poly inserts

[shmoo]

does poly insert mean polly feel and performance?

_isiah

[Venom13132]

I'm looking for a driver's door in white. I'd want the pearl white that they used in 94,95. (maybe they even used it until 97+) I'd like it free of any dents or rust, but I suppose it could have some minor scratches or door dings.

Thanks.

I have one from a stealth. Its in pretty good shape, no rust. the window motor is removed. I will have it at my house 6miles from the hotel.

[n2nsanity]

i haven't used them yet, but can tell they're much stiffer than the stock rubber inserts
also because they're stock mounts, guaranteed perfect fitment


does poly insert mean polly feel and performance?

_isiah

[shmoo]

well, what do you want for them? my funds are limited for the meet as i'm already signed up to spend 140.

where'd you have these made? or where'd you get them? gotta link?

i'd trade you a 4 bolt block, a front diff, cams, or a forged crank plus a little cash from you for the mounts. pm me! completely negotiable. that's pretty much all i have that i'm interested in bringing to the gathering. and the block would probably be a bit of a beetch.

let me know, i'll probably want those mounts

_isiah

[n2nsanity]

iono, maybe $75 for the mounts

what kind of cams do you have? i have 2 or 3 sets of stock n/a cams already
i don't really need much right now
have my hands full with all the crap i have already
i will post up my wishlist tho

[shmoo]

the cams are tt cams from four bolt heads.

i'll give you cams for the motor mounts, or cams and that front diff if you're interested. let me know though, so i can put something in my car.

tanks!

_isiah

[n2nsanity]

lsd? i have a 92 mtx in now, so probably can't use it. don't think any were made for 91,92
don't think i need the cams

[n2nsanity]

here's some things from my wishlist

9 or 10mm plug wires
ground wire kit
fuel pump hotwire kit
anodized/polished fuel rails
fuel pressure regulator
aftermarket or maybe new oem fuel filter
hiflow cat
blue led interior light kit
gloss black powdercoated valve covers
gloss black powdercoated or polished plenum
shortshifter
new shocks
new ceramic brake pads
drilled/slotted rotors
braided ss brake lines
rebuilt/gloss black powdercoated calipers
silicone radiator hoses
new oem or aftermarket suspension bushings
engine bolt dress up kit
99 front bumper
fiberglass deft top secret hood/evil eyes
10" sub

[shmoo]

no, it's the front diff from a twin turbo 25 spline tranny

http://i144.photobucket.com/albums/r171/shmooly/Parts/S5002788.jpg

if your 92 is tt, you can use it for sure. hammm, well i'd sure like those mounts. anything else you'd want? lets see this list.

_isiah

[shmoo]

i've got a very pretty 10 inch jl w1v2 that i recently put back in my car. i don't really plan on keeping it, at least not in that box, so i might consider trading that for the mounts

and i've got a no name fpr, but i think i should figure out how to make that work.

[Nationalmilkman]

Anyone have everything for a Gen1 TT brake conversion?

[shmoo]

i've got a front caliper that needs to be rebuilt.

_isiah

[JohnnyTurbo]

For a 1993 VR4, I need a driver's side tail light, active exhaust switch, one chrome exhaust tip and an ETAC module. At least that is what I am told is what is needed. The headlights do not go up and down and the ETAC module is what I was told was causing them to be non-functional.

[colossus]

-Parts wanted-
Front strut tower bar
~720cc inj
AN connectors
dual pass radiator
Top secret hood
clear cam covers

-For Sale-
Brand new 16t td04 h Turbos
13g DSM turbo
gen 1 DS TT caliper
Gen 1 PS Mitsu TT caliper
Gen 1 rear DS calpier
DS Door
2 sumotomo tires 245/45/17
2 bridgestone potenza 245/45/17
2 fuzion 245/45/17
Grey Stealth floormats
Cusco rear Strut Tower bar
Intake and intercooler piping
1 rear Tein S spring
1 Stock rear TT spring
ECS strut tower caps
trunk buckets and panels
OEM Cat

[Chris@Rvengeperformance]

I'm looking for a viper hood. probably needs to be in a box of some kind

[anyonebutme]

Anyone have everything for a Gen1 TT brake conversion?

I should have calipers and knuckles, don't know if I have lines, and no 1G rotors. Let me know.

[Nationalmilkman]

Maybe a thread should be made for NG12?

[anyonebutme]

Damnit, who narco'd? Colossus!

[colossus]

ummm narco'd?? bahhh

[JohnnyTurbo]

Trying again for this year.

For a 1993 VR4, I need an active exhaust switch & an ETAC module. At least that is what I am told is what is needed. The headlights do not go up and down and the ETAC module is what I was told was causing them to be non-functional. Also need 2 3000GT snake eyes, the plastic part of the pop up headlights that go around the bulb and a stock set of working 1st gen fog lights. Also needed for our '91 VR4; cigarette lighter, ash tray, seat bolster and lumbar switch, plastic around speedo and the light assembly above the mirror. Former owner painted these blue and stock ones are needed to replace them.

[n2nsanity]

Johnny, I'll try to bring a speedo bezel and dome light and possibly lighter and cc tray's if I can find them. Won't be there til thursday tho

Colossus, I have 2 catch cans, 1 new in box, other slightly used.

[Boomer3000]

I am bringing......

Rfl Bov
3000gt manual holder that goes in the glove box 1st gen style
Gauge cluster cover
1995 SL Ecu
5spd shift knob
TT MAF with aftermarket air filter adapter
and what ever anyone wants for an awd 5spd trans

[Venom13132]

I am going to go fill up a box of parts and take it to registration and give it to Lori and Allen. All these parts will be free!

[Chris@Rvengeperformance]

I am bringing......

Rfl Bov
3000gt manual holder that goes in the glove box 1st gen style
Gauge cluster cover
1995 SL Ecu
5spd shift knob
TT MAF with aftermarket air filter adapter
and what ever anyone wants for an awd 5spd trans

hey I need a syncro ball for 3/4. Do you have one?