View Full Version : Leather seats. Gathered or flat?
http://leatherseats.com/images/seat_inserts/GatheredInserts2.jpg
http://leatherseats.com/images/seat_inserts/FlatNonPerfInserts1.jpg
OhioSpyderman
05-19-2011, 11:05 AM
Are we talking 3S seats? Are you doing the install yourself or having it professionally done?
"We" have done 3 installs with two different vendors products, and I can tell you that you literally have ZERO chance of getting the seats to look like the lower picture....
Just my .02
Bob. :)
OhioSpyderman
05-19-2011, 11:11 AM
My Stealth, Leatherseats.com, flat/perforated.....
http://i141.photobucket.com/albums/r65/mitsuman3/DSC00491.jpg
http://i141.photobucket.com/albums/r65/mitsuman3/DSC00488.jpg
Are we talking 3S seats? Are you doing the install yourself or having it professionally done?
"We" have done 3 installs with two different vendors products, and I can tell you that you literally have ZERO chance of getting the seats to look like the lower picture....
Just my .02
Bob. :)
This will be for my stealth and I haven't decided if I'll attempt it. I'm pretty good at a lot of stuff but I'm also pretty bad at a lot of stuff :) I have a feeling that this might be one where experience makes the job look good. So even after doing three sets, you'd say that you still don't have enough experience to get the flat look?
I also didn't think about which one would last longer. I would assume the gathered leather has more give so there is less chance of it ripping overtime?
Alan92RTTT
05-19-2011, 11:20 AM
My install job. I was a first timer when I did it.
http://alan.3sgto.org/imagesjpg/IMG_3024_1.JPG
Jimvr4
05-19-2011, 11:31 AM
Here's the gathered look. They still look the same after about 7 years
http://jns.jimnshar.com/10380a90.jpg
http://jns.jimnshar.com/10180a90.jpg
Chris@Rvengeperformance
05-19-2011, 11:59 AM
Are we talking 3S seats? Are you doing the install yourself or having it professionally done?
"We" have done 3 installs with two different vendors products, and I can tell you that you literally have ZERO chance of getting the seats to look like the lower picture....
Just my .02
Bob. :)
My seats look like the 2nd pic.
Sent from my DROIDX using Tapatalk
UTRacerX9
05-19-2011, 12:14 PM
Not a big fan of the gathered look, plus all the dust, crumbs, and what not accumulate in the folds. Unless you are grossly overweight, I don't think there's any worry about stretching out a flat fitment.
Alan, your seat turned out really well, looks nice!
Alan92RTTT
05-19-2011, 12:16 PM
I took my time. I tool the seat out of the car, brought it into the living room and did it while watching movies. It took 5-6 hours of work per seat.
Strong hands and patience are a must.
Thanks for the info/pics! I really don't mind the look of either but I think I might prefer the flat look a bit more. The biggest thing is definitely getting rid of old worn leather.
Nationalmilkman
05-19-2011, 12:39 PM
I like the flat look better. IMO these are sports cars not BMWs so the gathered looks out of place in a 3s. I want to have my seats redone but I also want them flat.
DocWalt
05-19-2011, 12:59 PM
I like the flat look better. Gathered may work well if you're replacing the foam with softer stuff and want the extra freedom to sink into the seat.
93STLTH
05-19-2011, 05:30 PM
Not the best picture, but you can see mine turned out very flat. Not bad for my first attempt.
http://i37.photobucket.com/albums/e65/unquiltom/Palomar%208-12-07/P8120612.jpg?t=1305836726
Not the best picture, but you can see mine turned out very flat. Not bad for my first attempt.
http://i37.photobucket.com/albums/e65/unquiltom/Palomar%208-12-07/P8120612.jpg?t=1305836726
That did turn out very nice! What leathers did you use?
93STLTH
05-19-2011, 05:40 PM
That was from one of the leatherseats.com group buys.
I recently installed some Corbeau seats, so these will be going to a new owner.
Well I went with flat. Cheapest upholstery shop I found locally wanted 1650 including tax to do the interior. I did not like that. $809 for leatherseats.com with flat inserts, white stitching, install kit. I'll deal with some wrinkle for 800 bucks haha.
OhioSpyderman
05-25-2011, 11:10 AM
Should have went with this guy..... 1990-1999 MITSUBISHI 3000GT GENUINE LEATHER SEATS COVER | eBay (http://cgi.ebay.com/ebaymotors/1990-1999-MITSUBISHI-3000GT-GENUINE-LEATHER-SEATS-COVER-_W0QQcmdZViewItemQQhashZitem5ae0a27201QQitemZ39031 5799041QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)
We have two of his sets...the last set I paid $450 shipped.....ALL LEATHER...
Bob.
Should have went with this guy..... 1990-1999 MITSUBISHI 3000GT GENUINE LEATHER SEATS COVER | eBay (http://cgi.ebay.com/ebaymotors/1990-1999-MITSUBISHI-3000GT-GENUINE-LEATHER-SEATS-COVER-_W0QQcmdZViewItemQQhashZitem5ae0a27201QQitemZ39031 5799041QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)
We have two of his sets...the last set I paid $450 shipped.....ALL LEATHER...
Bob.
Hmm that is a good price. I guess I'm a little too late on that one.
Polygon
05-25-2011, 08:52 PM
Should have went with this guy..... 1990-1999 MITSUBISHI 3000GT GENUINE LEATHER SEATS COVER | eBay (http://cgi.ebay.com/ebaymotors/1990-1999-MITSUBISHI-3000GT-GENUINE-LEATHER-SEATS-COVER-_W0QQcmdZViewItemQQhashZitem5ae0a27201QQitemZ39031 5799041QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries)
We have two of his sets...the last set I paid $450 shipped.....ALL LEATHER...
Bob.
Bob, what colors did you get? Were either of the sets two tone?
OhioSpyderman
05-25-2011, 08:57 PM
Bob, what colors did you get? Were either of the sets two tone?
No, one was BLACK and the other was a shade of tan, I believe L2?
Both sets were VERY well made, and the latest set had closures on the headrests that the first did not....
Bob. :)
Polygon
05-25-2011, 10:17 PM
I'm sold as long as I can get the colors to match up.
Anyone know which will work better for the install; angled or straight hog ring pliers? The leather seats kit includes straight so I assume that will work best but maybe that is just the cheap option.
OhioSpyderman
06-07-2011, 07:07 PM
Hi Toni,
I bought my own from ACE and they were straight and have worked fine for 3 installs...
Just sayin....
Bob. :)
Jimvr4
06-07-2011, 07:22 PM
I think my kit came with angled but I can't remember any spots that are so tight that it matters which type.
Hi Toni,
I bought my own from ACE and they were straight and have worked fine for 3 installs...
Just sayin....
Bob. :)
I think my kit came with angled but I can't remember any spots that are so tight that it matters which type.
Sweet thanks guys. I might have everything by the weekend. Hopefully I can get started.
93STLTH
06-07-2011, 11:16 PM
A little trick you might be able to use... There were a few places where getting the hog rings to work was almost impossible. I got some heavy duty cable ties, ran them through the wire pieces in the leather and when I had everything right, I just tightened the cable ties and cut off the excess. Mine were still holding up after 5 years with the cable ties, but it wasn't a daily driver and I don't have temperature extremes here in San Diego.
Alan92RTTT
06-08-2011, 12:16 AM
I was able to get all of the hog rings in place.
Finishing up the back seat. Sitting on it to get the glue to set. Straight has worked so far. I can see why shops charge good money for the install.
http://primaryboost.com/store/rt/leatherseats/IMG_1076.JPG
Jimvr4
06-13-2011, 03:14 AM
Well done Toni!!
93STLTH
06-13-2011, 11:07 AM
Looks good!
I bought some foam to fill in spots that are wrinkled but I want to use it on the fronts first to make sure I have enough for them. I don't think I'd be able to order more before the NG so the backs are less priority.
I also had do some repair work to the tops of the backs because the foam was separated and became saggy. I always wondered why it was like that.
http://primaryboost.com/store/rt/leatherseats/IMG_1057.JPG
http://primaryboost.com/store/rt/leatherseats/IMG_1062.JPG
Well I had a HUGE boo boo today. I mixed up the driver and passenger side back :( FML Gonna call leatherseats and see what my options are. I might try to add some kind of embroidered patch as if I meant it to be there :)
Anyway, here is the passenger. I added a decent amount of foam to the lumbars.
Before
http://primaryboost.com/store/rt/leatherseats/IMG_1077.JPG
After
http://primaryboost.com/store/rt/leatherseats/IMG_1108.JPG
OhioSpyderman
06-15-2011, 08:14 AM
Toni, unless I'm not seeing things properly, you haven't put the hole for the belt guide in that seat back yet. If not, just take it back off and put on the passenger leather.
I know its a bit of work, but will save your kit....
Bob. :)
Well the problem is this is the passenger side and I had already cut the hole for folding the passenger side :( I can move it to the driver's side and have a slice in that side but at least my passenger's will be good and I won't have to touch it. I'm gonna give leatherseats a call when I they open and see what they recommend.
I could put the passenger's side on the driver but then I'd have that recess for the folding mecanism. Not sure what will look worse :(
I am winning!
http://www.primaryboost.com/store/rt/leatherseats/IMG_1109.jpg
http://www.primaryboost.com/store/rt/leatherseats/IMG_1110.jpg
OhioSpyderman
06-16-2011, 09:57 AM
You talk to leatherseats about a solution yet?
Looks Great!!
Bob.
Well, someone pointed out that the side bolsters look more wrinkled to the original pic. I'm guessing the real passenger's side was a little larger in that area then the driver's hide I had on there first. I probably won't have time before the NG but when I get back I'll probably add another layer of foam to that area to tighten it up.
You talk to leatherseats about a solution yet?
Looks Great!!
Bob.
Yeah they were able to get another driver's hide for the "You are an idiot" discount. Not exactly cheap by any means but at least I don't have to buy a whole new kit or something. Since I didn't cut the seatbelt guide hole I can actually use it for either side should anything major happen to a seat, ie major tear or stain or something, I'll just run into the same issue with slice for the driver's.
Some final pics. I still have to convert the last few remaining items black and it will be 100% slick :) Rest of the wrinkles have been coming out after a few days in the sun.
http://primaryboost.com/store/rt/leatherseats/DSC_0001f.JPG
http://primaryboost.com/store/rt/leatherseats/DSC_0002f.JPG
http://primaryboost.com/store/rt/leatherseats/DSC_0003f.JPG
93STLTH
06-18-2011, 11:02 PM
Nice! Makes it look new again!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.