View Full Version : I need help to identify shift forks in Getrag 6 speed transmission
IcelandGTO
05-17-2011, 05:19 PM
Hi guys.
I was shopping for transmission parts today and need your help to get my vr4 on the road again
I need help to identify those shift forks.
They are from the Getrag 6 speed gearbox for VR4.
I mainly need to know which is the shift fork for 1st to 2nd gear
But it's not bad to get to know them all.
Also, if there is something missing from the shift forks in this?
All of them.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0019.jpg
A.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0020.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0021.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0022.jpg
B.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0024.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0025.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0025.jpg
C.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0027.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0028.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0029.jpg
IcelandGTO
05-17-2011, 05:19 PM
D.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0031.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0032.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0034.jpg
E. looks to have been rebuild at one point.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0036.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0037.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0038.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0039.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0041.jpg
all help appreciated
:)
J. Fast
05-17-2011, 09:43 PM
Which serial number is damaged?
Forks should be stamped XXX.X.0653.90.
XXX.X.0657.90
XXX.X.0661.90
XXX.X.0665.90
Which one is damaged?
I'm not sure if this had been made public before but the serial numbers are the steps in the gear engagement. Generally the lowest number is for the 1/2 fork next would be for the 3/4 fork and etc. So your lowest number will be the 1/2 fork. In this case it will be the XXX.X.0653.90 stamp. 3/4 would be the XXX.X.0657.90
BTW. Someone should add that to the 3S Wikipedia ;).
J. Fast
05-17-2011, 10:45 PM
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_051711_003.jpg
Looking at the bellhousing. 446.X.0653.90 is closest to the bellhousing and then the forks are sequentially stacked. The second one from the bellhousing is 446.X.0657.90. The third one is 446.X.0661.90. The one closest facing in the picture is 446.X.0665.90.
Pay no attention to the position of the bottom fork. It's not pinned. It's a spare I just put on there for sequence illustration. I've broken two 1/2 forks and have a collection of them :). If you need parts just let me know. If I don't have it, I can get them pretty quick from Jack in Colorado Springs. We cool like that :).
Jeremy
Pay no attention to the position of the first fork.
J. Fast
05-17-2011, 11:01 PM
Here's a pic from the back angle so you can see the distance from the shifter glide to each individual fork position.
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_051711_002.jpg
Just took these photo's about an hour ago so that's about as up to date as you can get.
Jeremy
RealMcCoy
05-17-2011, 11:30 PM
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0019.jpg
I want an 8 speed trans..... :D
IcelandGTO
05-17-2011, 11:46 PM
Thanks alot for your help J. Fast:w00t:
What happend to my VR4 is at one point i coult not put it in 1st or 2nd. If i shift gently it sometimes goes into 1st or 2nd. If i manage to get
into 1st it wont shift into 2nd right after. 3-6th and rewerse are fine. So the 1st/2nd shift fork must be failing somehow.
Those forks i have pics of here are what a got from a friend with a 6speed trans partout.
I needed to know If the 1st/2nd shift fork was one of them. Looks like the fixed one is the 1/2 shiftfork if 3sx can be trusted.
http://www.3sx.com/store/catalog/tranny-part-shift-fork-6-12-400l.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0037.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0036.jpg
I have another question.
Can the shiftforks get replaced without pulling the transmission out from the engine/ Clutch ?
Sorry for my English.
GTOJOE
05-17-2011, 11:49 PM
You should talk to jacksTransmissions and look at getting the billet shift forks.
IcelandGTO
05-17-2011, 11:58 PM
You should talk to jacksTransmissions and look at getting the billet shift forks.
I will. Later. I need it on the road soon. Sort of a National Gathering here in Iceland in 3weeks :/
J. Fast
05-18-2011, 01:07 AM
That 3sx pic is a little deceiving. The 6-speed 1/2 shiftfork is not fixed (atleast none I've ever seen), it has a roll pin. Go by the serial number on the fork unless it's a billet cut fork. Whomever you decide to order from make sure you get the serial number. As for the billet forks, Supercar and Jacks sell them for around $350 (for the full set) last time I checked. You can also get one machined for about $150.
The roll pins get a little sloppy when you remove and reinstall them so I wouln't do it with the trans in the car if that's what you're elluding to. If they are even a little loose it's possible for them to spin and expell themselves from the gearbox chattering or the excitation of the gearmesh. They'll eventually worm their way out of the alignment hole so you have to make sure you flare them.
When the alignment pin drops out or starts to work it's way forward you'll start having problems with paired gears on a hub assembly. You'll eventually start getting getting blocked out of a gear and/or it will get really notchy and lock into gear.
I have a picture of a gearbox I rebuilt some time ago that had really bad blockouts. When I opened it up I found two of the roll pins had started to work loose. Luckily they never came out free and clear or it could have been disasterous had they wedged between the gears.
IcelandGTO
05-18-2011, 01:24 AM
That 3sx pic is a little deceiving. The 6-speed 1/2 shiftfork is not fixed (atleast none I've ever seen), it has a roll pin. Go by the serial number on the fork unless it's a billet cut fork. Whomever you decide to order from make sure you get the serial number. As for the billet forks, Supercar and Jacks sell them for around $350 (for the full set) last time I checked. You can also get one machined for about $150.
The roll pins get a little sloppy when you remove and reinstall them so I wouln't do it with the trans in the car if that's what you're elluding to. If they are even a little loose it's possible for them to spin and expell themselves from the gearbox chattering or the excitation of the gearmesh. They'll eventually worm their way out of the alignment hole so you have to make sure you flare them.
When the alignment pin drops out or starts to work it's way forward you'll start having problems with paired gears on a hub assembly. You'll eventually start getting getting blocked out of a gear and/or it will get really notchy and lock into gear.
I have a picture of a gearbox I rebuilt some time ago that had really bad blockouts. When I opened it up I found two of the roll pins had started to work loose. Luckily they never came out free and clear or it could have been disasterous had they wedged between the gears.
Are you saying this aint 1st-2nd shift fork? this looks like it. And looks like ithas been machined/Rebuild here at some point. Looks fine.
I hope I'm not confusing you. Those (in picture) are not the shift forks that is damaged in transmission. Those is a shift forks that I was buying and are OK. There is no number on shiftfork 1st-2nd because that shift fork has been made in a local machine shop at some point i guess.
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0037.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/IMG_0036.jpg
J. Fast
05-18-2011, 01:29 AM
This picture is from a trans I rebuiilt last year. Dealership said this new OEM unit was blocking out several gears. This picture is from when i first took it apart. You can see how the roll pin expelled itself. It was caught early enough that it didn't damage the fork, hub, or the gear. The only thing damaged was a synchro. You can actually see how the pin was hanging on by a thread and bending right in between the forks.
http://i788.photobucket.com/albums/yy163/JFastMotorsports/Photo_070610_001.jpg
J. Fast
05-18-2011, 01:42 AM
Are you saying this aint 1st-2nd shift fork? this looks like it. And looks like ithas been machined/Rebuild here at some point. Looks fine.
I hope I'm not confusing you. Those (in picture) are not the shift forks that is damaged in transmission. Those is a shift forks that I was buying and are OK. There is no number on shiftfork 1st-2nd because that shift fork has been made in the localshop at some point i guess.
That is correct. To tell you the truth that fork kinda looks like a Porche or Hyundai Getrag fork. Somebody went to town with a welder and made it work. I couldn't tell you what or where it came from, it doesn't look like a getrag W6MG fork tho.
LOL, other than on television can you identify a guns model, make, and serial with the serial numbers shaved off.
J. Fast
05-18-2011, 01:46 AM
I want an 8 speed trans..... :D Haha, you shift every 10 miles per hour. I don't know if that would suck or be amusing :D
IcelandGTO
05-18-2011, 02:18 AM
That is correct. To tell you the truth that fork kinda looks like a Porche or Hyundai Getrag fork. Somebody went to town with a welder and made it work. I couldn't tell you what or where it came from, it doesn't look like a getrag W6MG fork tho.
LOL, other than on television can you identify a guns model, make, and serial with the serial numbers shaved off.
Yeah i get it :) found some serial numbers on the top part of it...446.9.0654.90
I know it looks like somebody made that but it look like a good work and cant see why it wont work like a Getrag fork Should..
I am in Iceland so ordering someting over seas isnt just as easy and cheap as for you guys. :/
If this fork works i dont see the point to get someting from the states thet will set me back about 1000$ after tax and Shipping.
this looks like a good craftsmanship
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9490.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9491.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9493.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9492.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9499.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9497.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9496.jpg
J. Fast
05-18-2011, 03:02 AM
Not a serial number for a 6 speed. That number and picture you just posted really helped out a lot tho. Someone took the 6 speed fork ring and sandwiched it onto a 5 speed knuckle and welded it on there. Hey, if it's strong, straight, and true... go with it. LOLO, now I know what I'm going to do with my old busted shift forks.
J. Fast
05-18-2011, 03:12 AM
Yeah i get it :) found some serial numbers on the top part of it...446.9.0654.90
I know it looks like somebody made that but it look like a good work and cant see why it wont work like a Getrag fork Should..
I am in Iceland so ordering someting over seas isnt just as easy and cheap as for you guys. :/
If this fork works i dont see the point to get someting from the states thet will set me back about 1000$ after tax and Shipping.
this looks like a good craftsmanship
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9490.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9491.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9493.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9492.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9499.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9497.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/101_9496.jpg
As long as it's not flexing and it's not going to separate in the gearbox and and shed the weld material you should be good. Camera pictures really don't do any justice in inspecting welds. If you're looking at it and looks like good work then go with it. Good welds are really strong.
BTW, out of curiosity what are the stamped numbers on the top of your other 3 shift forks?
IcelandGTO
05-18-2011, 07:38 PM
The stamped numbers on the other shift forks are
446.9.0658.00
446.9.0665.90
446.9.0661.90
and
446.9.0654.90 same as the the machined/Rebuild one.
looks like a 1/2 shift/fork that has faild at some point
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/101_9531.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/101_9530.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/101_9529.jpg
http://i1225.photobucket.com/albums/ee389/Hjalti_gto3/VR4%20Shift%20forks/101_9532.jpg
J. Fast
05-18-2011, 08:05 PM
So you have two damaged 1/2 shift forks then? The welded one and now another that has a snapped thumb?
IcelandGTO
05-18-2011, 08:42 PM
So you have two damaged 1/2 shift forks then? The welded one and now another that has a snapped thumb?
:Doh:
I have one damaged 1/2 shift fork still in the VR4
I have one damaged 1/2 shift fork the one in the pics that has a snapped thumb (from the collection of used transmission parts i bought before )
I have one GOOD 1/2 shift fork the one machined/Rebuild welded that will be installed into the transmission soon (from the collection of used transmission parts i bought before )
J. Fast
05-18-2011, 09:21 PM
You sure they aren't breaking because they're the wrong number? You should have a 446.9.0653.90 in there for the 1/2 fork? When are you dropping the transmission and making the repair?
IcelandGTO
05-18-2011, 09:49 PM
You sure they aren't breaking because they're the wrong number? You should have a 446.9.0653.90 in there for the 1/2 fork? When are you dropping the transmission and making the repair?
the top part has the 446.9.0654.90 number.
the bigger part has the 446.9.0653.90 number ;)
Hopfully i will be dropping the transmission and making the repair this weekend.
:)
.
J. Fast
05-18-2011, 10:04 PM
Hey, there's a "U" in FUN :) !
IcelandGTO
05-18-2011, 11:03 PM
Hey, there's a "U" in FUN :) !
what..? lol :)
IcelandGTO
05-18-2011, 11:21 PM
.....
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.