View Full Version : mounting the oil cooler sideways
mb7050
05-08-2011, 02:40 PM
http://img850.imageshack.us/img850/6162/imag0229i.jpg
I've got an impression that its ok
as long as you position the oil cooler so that the outlet is higher than the inlet so that air bubbles don't get caught in the oil cooler.
Is there something else I should take into consideration ?
11secondFWD
05-08-2011, 04:33 PM
If it is mounted sideways, the inlet should be on the bottom. So it fills from the bottom up. That is the way all the manufacturers recommend oil coolers and tranny oil coolers. They want them like that or with inlet and outlet on the top.
mb7050
05-08-2011, 05:45 PM
I´m worried about that the oil in the cooler flow back into the oil pan when engine is not running
but i´m thinking that if I run the lines higher than the cooler the oil should not flow back.
kinda like this
http://img19.imageshack.us/img19/6486/imag02293.jpg
KeithMac
05-08-2011, 05:52 PM
You could run the bottom line up to the top of the cooler to stop the cooler draining if it`s an issue?.
mb7050
05-08-2011, 06:23 PM
i dont know if its a real problem but this cooler holds plenty of oil. if all the oil in the cooler flows back to oil pan i would get false oil dip stick reading..
sublime_whatigo
05-08-2011, 08:23 PM
Anyone else have any input on this. I've read that it didn't matter plenty of places but you guys have me wondering about mine now...
which one is IN hole ? on the filter housing.
11secondFWD
05-09-2011, 04:28 PM
I wouldnt worry about it going backwards through the cooler, then the lines, then the OFH. Many people have coolers mounted sideways. Just put the feed line into the lower port.
oohnoo
05-10-2011, 12:00 PM
I'm curious to which one it is also
which one is IN hole ? on the filter housing.
Erron Spalsbury
05-11-2011, 06:34 PM
i dont know if its a real problem but this cooler holds plenty of oil. if all the oil in the cooler flows back to oil pan i would get false oil dip stick reading..
You are on the right track here. Without a check valve that is what will happen.
mb7050
05-12-2011, 02:44 PM
You are on the right track here. Without a check valve that is what will happen.
even if I run the lines higher than the cooler ?
mb7050
05-12-2011, 04:17 PM
and now i only need to find -12 AN check valve, Any help greatly appreciated :)
Erron Spalsbury
05-12-2011, 04:26 PM
You might be ok that way, give it a try.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.