PDA

View Full Version : Let the fun begin... 1st time journey in painting a my own car....



bcarroll76
05-07-2011, 11:08 PM
*** Finished pics one Post # 43*** Hey guys, I picked up this Black 96' VR4 that has horrible peeling of the clearcoat so I decided I am going to teach myself to paint my own car... After reading and reading and asking lots of question's, I am ready to begin... Hopefully this thread cna help someone else.. I will keep updating this post as I proceed I am off most of next week so this should move pretty fast so stay tuned...

If you are a naysayer and have nothing good to say, please go elsewhere.. I am not a professional and nor do I claim to even try. This is a home job... I am going to do the best I can, and hopefully I can make the car look descent at the least! If you have any recommendations please feel free to chime in..

This is my journey...

Thing I purchased or am using:

1. Ingersol Rand Orbital Sander: ( I love this thing!!!!)

http://lh3.googleusercontent.com/public/o-AqKqQwlaxQsQGw-EouXIJ381FkNIz83idM0Y3vrPM5twGgHiVu53jSIykQglQD3N0 YcM90llSM-Iu2t7pWHY0xyoHiQFs1yhb6R5kDiJGvB2_6JOzkygGGQHh1xJ3 mNPaA3C2oqWsVKk9611D6RnFAU-cMnuscqoAg6Kt3MnkG5stUjfNH87eQ5bmoaN4ozirgCzEgam59 6TSKPoOFMNTJ5eSofndJO3q4XT87pW7CjQ

2. DEVILBISS 802343 Paint Gun Kit 2pc

http://lh4.googleusercontent.com/public/FZysWPjGzVvgYUullFL0KWRjOX5KWK6sX2GF-jdP55Bg57VhLaCytJ4sy-e6VBgNrUSiAWajMUzSrsNMh19T2YMLwsnxiIWXwN5hQseIkHon m9nFxovTrZOEpScnfKL114fVnKYpEpmySrk6lqoMSdthZKaPFz drkpC-zm70VE3iZTbYuQJkaRRiUZM

3. Craftsman Professional 60 Gallon Air Compressor ( I tried using my little 15 gallon craftsman compressor and that was a pain, so I went and bought a new one today :biggrin: )

http://s.shld.net/is/image/Sears/00916476000?hei=248&wid=248&op_sharpen=1&resMode=sharp&op_usm=0.9,0.5,0,0

4. (26) 6" 3m 320 grit Orbital Sander Pads

5. (5) RED scruff pads

6. (5) pack of 600 grit sheets

7. Heat gun, razor blades, goo gone ( for removing the vinyl lettering and leftover residue on the car)

8. Body filler and plastic spreaders..

9. (5 -6) Tach Cloth's

10. Gallon of Laquer Thinner

11. The Paint>>>>>

House of Kolor - Black BC-25
https://shop.houseofkolor.com/hok/catalog/images/Normal/4153/BC25.G01.jpg

and I will add:

COBALT BLUE KK05.C02 Intensifier (for a deeper Black)

https://shop.houseofkolor.com/hok/catalog/images/Normal/4233/KK05.C02.jpg

12. Misc. Items needed during project

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcvyEJPN0bI/AAAAAAAAAIs/tlExiF_sgaY/s512/IMG_00025.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/TcvyT1t3M2I/AAAAAAAAAI0/jE1cXZLmqWg/s512/IMG_00027.jpg

I will list other things as I use them....

bcarroll76
05-07-2011, 11:09 PM
Here are a few Pics of the original paint on the car....

Hood is the worst!!!

https://lh3.googleusercontent.com/_iJjbWEEyKAo/TcX0wo2nutI/AAAAAAAAAFA/sxMEKSdPC4c/s640/IMG_1561.jpg

Roof...

https://lh4.googleusercontent.com/_iJjbWEEyKAo/TcX0x8hXplI/AAAAAAAAAFE/gjIDFerqf4U/s640/IMG_1564.jpg

Bumper...

https://lh3.googleusercontent.com/_iJjbWEEyKAo/TcX05xey8yI/AAAAAAAAAFY/0yCLAoPPews/s640/IMG_1577.jpg

Hatch...

https://lh6.googleusercontent.com/_iJjbWEEyKAo/TcX00yDFa8I/AAAAAAAAAFM/puMsaxJViSU/s640/IMG_1567.jpg

bcarroll76
05-07-2011, 11:10 PM
While my wife and son used the red scratch pads around the areas hard for the orbital to reach, I started on the roof with the orbital and started working my way down.. I will use the 320 grit pads for the initial sanding of the clearcoat... My goal here is to scuff the entire car and remove any (shiny) areas. This will give the new paint a much better chance of sticking.. You have to be careful with the orbital to not push to hard or you may cut to deep and get down to bare metal. Then you will find yourself sealing the areas... Use the Red scuff pads to scuff any hard to get to areas on the car...

Remove headlights, side markers, rear lights etc...

You should really wash the car really good first and use the air hose to blow out any areas of the car that may trap any water.... Then you can get started... I plan on using acetone or laquer thinner after getting the whole car sanded to make sure any oils . waxes or finger prints are washed away...

This is just about 4 hours work... also stops for a couple of cold ones!!

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcX1JtGJLDI/AAAAAAAAAFg/8fGK-Qwqpjk/s640/IMG_1580.jpg

https://lh4.googleusercontent.com/_iJjbWEEyKAo/TcX1LGaCnkI/AAAAAAAAAFk/fwfsGMXhuxw/s640/IMG_1581.jpg

Moving on.. making quick work of this car...

https://lh6.googleusercontent.com/_iJjbWEEyKAo/TcX1MLQUZYI/AAAAAAAAAFo/KzR5GxVmuzk/s640/IMG_1584.jpg

Use a Heatgun, razorblade and goo gone to remove the vinyl lettering on the side of the car... make sure not to cut to deep by accident using the razorblade..

https://lh4.googleusercontent.com/_iJjbWEEyKAo/TcX1NrZErXI/AAAAAAAAAFs/0Wx6ZNC-3LY/s640/IMG_1585.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/TcX1O7mJb2I/AAAAAAAAAFw/1lQNScz1iwk/s640/IMG_1586.jpg

https://lh3.googleusercontent.com/_iJjbWEEyKAo/TcX1RPUxsvI/AAAAAAAAAF4/iDzCDQQYKtA/s512/IMG_1588.jpg

bcarroll76
05-07-2011, 11:10 PM
With Church and Mother's day, i wasnt able to accomplish a whole lot today... I finished the first pass of sanding...I then used the air compressor and removed the dust from the car... I then took dry cloths and wiped down the whole car.. After this I found any shiny spots and or specks that I missedand blended them in. Tomorrow, I am going to buy some wax and grease remover and wipe down the whole car. Then I will go ahead and start using the body filler to fill any low spots..

Here are a few pics of todays progess..

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcdH6WsMp5I/AAAAAAAAAG0/tHX_WpRKnQM/s640/IMG_1596.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcdH68I2w2I/AAAAAAAAAG4/V5YeOwAbmyk/s640/IMG_1593.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcdH63CqqnI/AAAAAAAAAG8/2zyGYuq4m10/s640/IMG_1595.jpg

https://lh3.googleusercontent.com/_iJjbWEEyKAo/TcdH8FnbvKI/AAAAAAAAAHA/8mP4IOEuOOE/s640/IMG_1594.jpg

bcarroll76
05-07-2011, 11:40 PM
Temporary Paint Booth.... ;) .... 2x4's and 6mil clear plastic

https://lh3.googleusercontent.com/_iJjbWEEyKAo/Tci02s58xjI/AAAAAAAAAHQ/xGTE1fuSBmU/s640/IMG_00009.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/Tci1W481zjI/AAAAAAAAAHo/IaisTecGkVs/s640/IMG_00015.jpg


Body filler.... damn I hate this stuff....

https://lh4.googleusercontent.com/_iJjbWEEyKAo/Tci1lCevdZI/AAAAAAAAAHs/IO_6mHpGNMI/s640/IMG_00016.jpg

https://lh4.googleusercontent.com/_iJjbWEEyKAo/Tci1s_Ok1tI/AAAAAAAAAHw/jHFlgv7svjA/s512/IMG_00017.jpg

Day 3:

Sanded down the body filler, wiped the areas down with W& G remover and then put a coat of Filler Primer over the sanded areas... I also noticed a few more areas that will need a little filler so i will hit those tonight.. I also taped and papered the car and put it up on Jack stands... I used Frog Tape and Napa Green Paper....

https://lh4.googleusercontent.com/_iJjbWEEyKAo/TcmXK_izUbI/AAAAAAAAAIY/TPasqI_abYo/s640/IMG_00021.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/TcmXRDBQm6I/AAAAAAAAAIc/3sL9_g7N6g4/s640/IMG_00022.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcmXZoA1HOI/AAAAAAAAAIg/KB0-tkxQiuE/s640/IMG_00023.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TcmXh4EQ2pI/AAAAAAAAAIk/ROg_Z_-J7ng/s640/IMG_00024.jpg

green-lantern
05-07-2011, 11:44 PM
Good luck! the car needed it.

MR2
05-07-2011, 11:45 PM
nice....interesting! I've been using a vibrating sander instead of your orbital, love the idea of air tools though :D

R/T93
05-07-2011, 11:46 PM
Good Luck! Remember, prep is the most important part!

Before applying paint to the car, tape some newspaper on the wall or use a big piece of plywood and do some practice sweeps to check for paint pattern/flow.

bcarroll76
05-07-2011, 11:55 PM
Thanks guys... will update more as I get it done... I am really having a good time so far..

mb3000
05-08-2011, 12:37 AM
Looks great so far, subscribed for the end result.

TwIzTeD_3kGt
05-08-2011, 12:43 AM
Doing the same thing in my garage for the first time (to the project Stealth, not the VR4). Just picked up a Mac Tools DA random orbital sander, but need a gun still and was looking at the one you got. Also my compressor is becoming annoyingly weak, might have to do what you did. :) Definitely interested in this! Good luck.

guido1205us
05-08-2011, 01:54 AM
Subscribed - looks good.

Hym3n
05-08-2011, 02:18 AM
I can't stress this enough:

PREP PREP PREP

You will start to get anxious want to skip to painting. Do not make this amateur mistake. You practically "can't" over-prep a panel. Take your time and get it right. You do NOT want to be hunting demons in your paint over and over again for years to come. Also, to clean off loose oils, prints, dust, etc., get a pack of tack cloths. Its like a thin shop rag that is mildly sticky with a soft detergent that cleans up all that mess. Do this once the car is clean and dry of major particles and already enclosed in your "booth."

Oyyci
05-08-2011, 10:03 AM
Also, to clean off loose oils, prints, dust, etc., get a pack of tack cloths.

Wax and grease remover is almost a must at this step too. But make sure you wipe a small area with it, than dry it off with another clean dry towel. If you let W&G remover dry, it will cause fish eyes, I've done it many a time in my little projects at home and work. I used to use the reducer for the paint to final wipe, but it doesn't seem to get all the crap off like W&G remover.

bcarroll76
05-08-2011, 12:00 PM
Ok so after i get done sanding everything, should I go and use the compressor and blow all the dust off, or can I actually wash the car off w/ water and mild detergent? so I can go back over things that I have missed? Or should I just wipe it down with W&G Remover on a towel and dry it off?

CoopKill
05-08-2011, 12:44 PM
Great start!

J. Fast
05-08-2011, 12:49 PM
After you blow it off with an air compressor while wearing a respirator use Eastwoods paint prep or something similar and tack rag it.

mcshooter
05-08-2011, 12:56 PM
good for you to do your own paint job, i would add that you need to put on a primer sealer before painting, good luck with your paint guns. a friend of mine used the same guns and it came out fairly good. had to be sanded and buffed. the quality of the paint gun is determined by the paint cap. some guns run $500 and up which is ok for a full time painter. but for a one time job you shold be ok. i believe the best gun for a once a year painter is the eastwood concours gun .. i have a top line debliss and the eastwood gun lays down just as good clear. use a piece of cardboard with a glossy side to adjust for spray pattern. remember too much pressure causes orange peel and not enough runs. follow the manufactures recommend... good luck

CoopKill
05-08-2011, 01:09 PM
Do you have sanding blocks? You need them. Never hand sand with your fingers.

There is not a flat panel on our cars. I would go over every square inch with a pad/block after done with the DA. 320 or 400.

You should have thoroughly washed the car a few times with Dawn soap, and then gone over it with wax, grease remover before sanding as well. This prevents the spreading of wax, grease, armorall and other crap. If you didn't your not f-ed.

Never use any sandpaper that you have used on the car before wax and grease remover, after. It is contaminated and should be tossed.

The prep, prep, prep comment was absolutely correct!

When you think you are done with the sanding, go over it again. Completely wipe the car with a wax n grease remover 2x, then use a tack cloth before you are ready to spray.

There are several ways to skin a cow, figure out which is best suited for you.
Google for info, ask around, and make your decision on the best way for you.

bcarroll76
05-08-2011, 10:59 PM
Ok guys, added a few pics of the progress today.. will get the wax and grease remover tomorrow and go over the car... also need to go over the bumpers again and hit the hard to get to spots with the red scruff pad...

I have the entire week off so should get alot done this week!!

Also purchased the paint today... added that to the list in the first post.. House of Kolor B25 Black and Cobalt Blue intensifier (this will make the black even deeper)

What clear should I use?

Boomer3000
05-09-2011, 12:47 AM
Sub.... Good work!!!!

kazevr4
05-10-2011, 12:40 AM
For clear Southern Polyurethanes online makes a good product without the super high cost. I also like Sikkens / akzo nobel products. Not a big fan of Shirwin Williams personally. I have sprayed a lot of stuff over the years and say do not use the low end line of a brand such as omni or shop line form ppg, if you get PPG get the nice stuff because you dont want to regret it when it rock chips or peels later ( I do like PPG also)

Looks like you have a good start. Dont get in a rush when spraying. Good lighting is key when you paint, make sure it is all covered evenly. A tip for spraying clear... i go the length of the car instead of panel to panel, because if you do panel to panel you tend to get runs where you overlap. need any more tips let me know. As I said I have painted 100's of cars and motorcycles

MR2
05-10-2011, 12:49 AM
What's this flake business, how hard is it to paint flake?

bcarroll76
05-10-2011, 12:54 AM
Thanks Guys... i went to Napa today and purchased the best clear they had. (take that for what its worth as well as whatever else I needed.. . i will take some pics and add them to my first post... I built my temporary paint booth out of 2x4's and 6mil clear plastic. After that I went over the bumpers again and cracks and what not with the red scruff pads...


Then...... Body filler..... ummm now I know dont use to much.... my arms are tired from sanding that crap down... The worst spots were the hood and roof... and one bad spot on one of the bumpers.... I sanded the spots down to bare metal w/ 60grit and then used w&g remover ... then applied the filler... let sit for 30 mins and then sand , sand, sand, sand, sand.... w/ 120 grit then feather edges with 320... still working on this process... Uploading some pics now of the temp paint booth and filler applied...

bcarroll76
05-10-2011, 05:08 PM
Well Day 3 brought sanding more filler and then taping the car off and cleaning and priming the filler spots... i also jacked the car and put it on jack stands... Pics on Front page!! More sanding tonight and a few spots to hit with filler that I missed...

CoreyB
05-10-2011, 05:13 PM
Wow man you were definitely using to much filler lol. Looks like your making great progress.

bcarroll76
05-10-2011, 10:52 PM
Now i know.... way to much filler.... live and learn.. just alot of sanding....

Drweldin
05-10-2011, 11:40 PM
Like someone else noted - a good sealer is a good idea...
I'm not sure about mixing brands, etc, as they are usually designed as a "system"
Booth looks good!

J. Fast
05-11-2011, 12:41 AM
Go man, looking good!

Primus101
05-11-2011, 12:53 AM
For the amount of time and effort spent feathering, filling & priming/block sanding, I would have just paint-stripped the hood. Once the paint shrinks up (out-gasses) 6 months down the road, it's likely those areas will show as ripplely. There's no better foundation for a long-lasting smooth look than the original steel. Unless of course the car is a bondo-bucket to begin with, then stripping is like opening a can of worms-

You're going to have a hard time spraying your second coat through the overspray fog in your booth, you'll have to vent it somehow & gently as a strong pull will bring in airborne crap. Dampen the floor-
Good thread, Good luck-

bcarroll76
05-11-2011, 01:29 PM
Thanks Primus.. I will see what I can do to vent the booth.. Your Right, I probably should have just too the hood and roof down to bare metal.. will know better next time...

TwIzTeD_3kGt
05-11-2011, 07:56 PM
Are you still planning to paint the plastics separately? Or are you doing it all at once?

bcarroll76
05-11-2011, 10:43 PM
Are you still planning to paint the plastics separately? Or are you doing it all at once?

Well, I was planning on it, but i dont have enough room in my shop to hang them up especially in the paint booth area... So I have pretty much decided to leave them on... I also think it will keep an even tone throughout the whole car. I dont want to have a lighter door then one of my bumpers you know.. I did take off the wing and will do it seperately..

I am ready for paint now, but my paint wont be delivered until Saturday.... Sux..... so now I just keep going around the car and sanding and touching up.. lol

J. Fast
05-12-2011, 01:23 AM
If you click on the link: How to Repair Car Paint Damage: Video Series | eHow.com (http://www.ehow.com/videos-on_497_repair-car-paint-damage.html) and scroll down the page to the, "Why do you paint your car?" video and let your computer idle after the video is over it will automatically roll thru the entire series on how to do paint work; sand, fill, sand, scuff, sand, prep, wipe, tack, blend/paint, sand, blend/paint... was about a 30 minute series, very informative, correct, and pretty descriptive.

We do alot of what he's taking about at the company I general superintend and project manage for. One of several company divisions I manage is specialty coatings and paint. Granted it's on a much much larger scale... hundreds of thousands of dollars, but it's still very exotic metal work and very high end/visability commercial paint projects. Prep is pretty much all the same except I didn't see any rust or any metal fab work required in the prep in the series. There's even more prep involved when you have to add new metal into a work area or are dealing with a substrate that's detioriating.

BTW, one thing no one has mentioned yet either is static charge. You can hang some balloons or run a copper ground charge wire into your prep and spray area to collect the dust particles (helps keep things really clean and free from dust). The plastic you are using works good but if you get a ricepaper thin mil count and cut it into strips and let it drape from the ceiling (like car wash fingers you drive thru) it will only make the space you're having to deal with better and help keep the dust down since you don't have an air handler.

Again, hat's off to you bcarrol for getting after it. Paint isn't one of those projects I'd ever want to do for myself because I'm OCD and it would take me months to get done. It's nice to see some good threads rolling thru this site, this is going to be a good one.

Keep up the hard work!

Jeremy

kazevr4
05-12-2011, 02:10 AM
Looks like you are getting there. Are you planning on sealing the car first or straight to base coat ? You sanded the car with 320 correct ? Did you block the whole car with anything smoother afterwards ? ( I think I saw you got 600 but nothing in between, just make sure you get the 320 scratches out) Black paint over 320 would not look so great as finished product. I spray base over 500 grit usually, or finer.
remember also when you are spraying your base dont hesitate to look it over real closely and wet sand any imperfections out with 800 grit wet before you go to clear it.

TwIzTeD_3kGt
05-12-2011, 08:53 AM
Well, I was planning on it, but i dont have enough room in my shop to hang them up especially in the paint booth area... So I have pretty much decided to leave them on... I also think it will keep an even tone throughout the whole car. I dont want to have a lighter door then one of my bumpers you know.. I did take off the wing and will do it seperately..

I am ready for paint now, but my paint wont be delivered until Saturday.... Sux..... so now I just keep going around the car and sanding and touching up.. lol

Probably the best way to go. I have a buddy who did his separately and regretted it for that exact reason.

bcarroll76
05-12-2011, 11:29 AM
Looks like you are getting there. Are you planning on sealing the car first or straight to base coat ? You sanded the car with 320 correct ? Did you block the whole car with anything smoother afterwards ? ( I think I saw you got 600 but nothing in between, just make sure you get the 320 scratches out) Black paint over 320 would not look so great as finished product. I spray base over 500 grit usually, or finer.
remember also when you are spraying your base dont hesitate to look it over real closely and wet sand any imperfections out with 800 grit wet before you go to clear it.

Kaze, I went over the car the last time with 600 grit and after that cleaned the dust off and went ahead and W&G removed it again. I plan on doing the W&G remover one more time and then Tack Cloth before I lay my first basecoat. After doing some looking and asking a few paint guys around here, I was told you dont have to seal the car unless you take it down to metal? Is this true?

bcarroll76
05-12-2011, 11:38 AM
J, thanks for the tips.. I did go ahead and add an exaust fan that blows up into the attic of my shop... (its and old shop and I will do this for now) if I see I am going to be more vehicles (if this one turns out) I will add one that blows outside...

For some reason, I wasnt able to open that webpage... I will try my other machine.. I have watched countless videos and read lots of articles, and it seems for the most part alot of people do it the same. There are always small little details that some doo and some dont... like which grit sandpaper to use and wether to seal or not to seal or wether to prime or not to prime.. etc...

I appreciate all the input guys, it will only help to make this thread better for everyone else... Thanks again

bcarroll76
05-14-2011, 11:40 PM
Well guys the paint came in today and I got started right away... the shop was warmed to 75 -78 degrees and I mixed the paint up... 2 to 1 Paint to reducer + 10% of the cobalt blue intensifier...

After 2 coats of paint.... total of 4 coats...

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tc81LZsdDcI/AAAAAAAAAJU/3Kh9A0Gp_hY/s512/IMG_00029.jpg

https://lh3.googleusercontent.com/_iJjbWEEyKAo/Tc81kCfHvJI/AAAAAAAAAJY/oIpqhlA-sgk/s512/IMG_00030.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tc82noCEghI/AAAAAAAAAJo/X8EyyJj4fJQ/s512/IMG_00034.jpg

After 4 coats of basecoat, I started the clear after waiting about an hour and a half...

This is after 2 coats of clear for a total of 4....

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tc82uDpmEtI/AAAAAAAAAJs/3_8T7Zm9dCA/s512/IMG_00035.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tc821TDpvBI/AAAAAAAAAJw/NaX8jV3tDc8/s512/IMG_00036.jpg

https://lh4.googleusercontent.com/_iJjbWEEyKAo/Tc82-U_PiKI/AAAAAAAAAJ0/t-_UKubODqY/s512/IMG_00037.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tc83Fo3UbEI/AAAAAAAAAJ4/bTniq2bBAPs/s512/IMG_00038.jpg

I willl get more pics of the car out of the booth after it sits 24hours in the booth at 75 degrees... It may be Monday before I take it out of the shop and get some better pics... The car looks great for a first time job.... I can see some spots that I didnt see before that I am not happy with, but all in all I love it...

FYI these are pics from my cell phone.. I will take some better pics with my camera...

CoreyB
05-14-2011, 11:47 PM
Looks great, glad you did this yourself

Amphiron
05-21-2011, 01:30 AM
update??

bcarroll76
05-21-2011, 06:36 PM
update??

I have been busy with a few other projects... Did some colorsanding a buffing today. I will shoot some pics today and load em up..

bcarroll76
05-23-2011, 11:38 AM
Here are a couple pics of the finished product... still needs one more buffing and I will post more pics as soon as the wife gets them sent to me...

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tdpriz_MOfI/AAAAAAAAAK4/-QjYMNNyDBQ/IMG_00046.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/TdprhzFz0jI/AAAAAAAAAK0/aumBakzN2xE/s512/IMG_00045.jpg

https://lh5.googleusercontent.com/_iJjbWEEyKAo/Tdp2bMdCtnI/AAAAAAAAALc/pg5lM3-Neek/s512/96_vr4_8.jpg

https://lh3.googleusercontent.com/_iJjbWEEyKAo/Tdp2bNBQcNI/AAAAAAAAALg/9HvC8Z1rs2M/s512/96_vr4_7.jpg

https://lh6.googleusercontent.com/_iJjbWEEyKAo/Tdp2bC0jXjI/AAAAAAAAALk/3EQ5-lr1P2o/s512/96_vr4.jpg

https://lh4.googleusercontent.com/_iJjbWEEyKAo/Tdp2bYjoObI/AAAAAAAAALs/0bncZZuIMH0/s512/96_vr4_2.jpg

https://lh3.googleusercontent.com/_iJjbWEEyKAo/Tdp2cHsslVI/AAAAAAAAAL4/1wFai5zTGTM/s512/96_vr4_6.jpg

j2k4
05-23-2011, 11:50 AM
's gorgeous.

Rocket
05-23-2011, 12:08 PM
Nice Night and Day difference! Very well done!

CoreyB
05-23-2011, 12:14 PM
Came out excellent.

bcarroll76
05-23-2011, 12:16 PM
Thanks Guys! I am happy with it

Boomer3000
05-24-2011, 12:46 AM
Looks really good man

Chris@Rvengeperformance
05-24-2011, 03:47 PM
looks great man, wish I had the space, time, etc to do that! I can barely paint a door in my garage...

FeaRpb
05-24-2011, 05:06 PM
Came out awesome

Amphiron
05-24-2011, 05:19 PM
Now that it looks so nice it really brings out those filthy exhaust tips.

bcarroll76
05-24-2011, 06:40 PM
Yeah its amazing how dirty things look in the wheel wells, exaust areas... Think I might clean them out and maybe spray on some rhino liner in those areas... "maybe"

box
05-25-2011, 03:55 AM
stunning results, well done. Has it had a bit of a prang on the front?

TwIzTeD_3kGt
05-25-2011, 12:13 PM
Very nice looking. Would like hi-res!

NOMIEZVR4
05-25-2011, 01:07 PM
more pics, great project!!

StealthyStu
05-25-2011, 04:42 PM
That looks great! Good job. Do you have any estimates for total cost spent on the supplies you needed?

mcshooter
05-25-2011, 07:08 PM
congrads and black is the only way to go. it shows to you folks who want to paint your car as long as you use a non metallic paint do it yourself.

Nihil
05-26-2011, 02:33 AM
Dude, that's sweet, congrats on the job, how'd you like the finish1 stuff? I can get that stuff at cost and was gonna paint my car with the full system, primer, sealer n single stage, the mixing is just weird since it doesn't require a reducer, just wonderin how it layed out for ya.

Boomer3000
10-19-2011, 03:39 AM
Been a couple months.. How is the Paint fairing? Still looking good??

Gearheadvr4
10-20-2011, 06:43 PM
Yup, high res pic update please!