PDA

View Full Version : Looking for someone local with a spare ECU to swap (Chicago)



92EuroDiamante
05-07-2011, 03:14 AM
Hey everyone, recently my car started having some weird symptoms (see my hotwiring thread) and I believe the problem to be the ECU.
I replaced the MFI, checked all ignition, fuel and related components. It runs when hotwired so it looks like somehow hotwiring my fuel pump blew my ECU (even though I did it according to instructions)

I am looking for someone with a spare 92 DOHC ECU that I can swap in and test really quick. If it runs, and the ECU you let me use is for sale I will buy it. If for some reason my car eats the ECU you let me use, then Ill pay for it. Its as simple as that. I doubt it will burn the new ECU because I have undone the fuel mod and that was the one done right before the problem. All other mods are at least a few hundred miles old and therefore not instant ECU death :p

I just need to figure out the problem. Im done dealing with the BS. Its summer and its time to enjoy all the hard work and money that went into the car!

92EuroDiamante
05-12-2011, 03:22 PM
Anyone?
Ive got to order a new ECU or repair mine by this week. so if you have a good one for sale heres a good chance to unload it.

DocWalt
05-12-2011, 03:53 PM
Probably better to swap your unknown ECU into a know good car to see if it will run. Safer for both of you.

92EuroDiamante
05-12-2011, 04:59 PM
Probably better to swap your unknown ECU into a know good car to see if it will run. Safer for both of you.

Definitely, I just didnt want to be a pain in the ass and have someone uninstall and install and ECU. If I remember correctly in the 3s its kind of a pain. In the Diamante its right under the passenger kick panel and can be taken in an out in a minute or two.
If anyone is generous enough to give enough of their time to swap in my ECU that would be great!

GTOJOE
05-13-2011, 10:36 AM
Very easy in the 3s. just remove one screw and the side pane lcomes off then you can unplug the ecu. 30 seconds worth :p

DocWalt
05-13-2011, 11:10 AM
Yup, super easy. Best of luck finding someone. Have you posted in the regional board?

92EuroDiamante
05-14-2011, 07:36 PM
Yup, super easy. Best of luck finding someone. Have you posted in the regional board?
Awesome!
I saw a total of 7 replies in my regional forum since the beginning of this site and decided against it :p.
Seems like we dont have a chicago thread!

92EuroDiamante
05-16-2011, 02:33 AM
Bump Bump

92EuroDiamante
05-21-2011, 02:22 PM
bump
bump

Emilie@GZP
05-21-2011, 02:59 PM
pull your ECU out, and check the capacitors. If they're leaky, it's your board. If you don't know what you're looking at, post the pic up or PM it to me, I'll let you know if it's good or bad.

What's the part number on the ECU? I should have some here that will work for you.

92EuroDiamante
05-21-2011, 03:23 PM
pull your ECU out, and check the capacitors. If they're leaky, it's your board. If you don't know what you're looking at, post the pic up or PM it to me, I'll let you know if it's good or bad.

What's the part number on the ECU? I should have some here that will work for you.

http://i53.tinypic.com/2eb9x7k.jpg

Here is a pic of the ECU. Looks pristine to me but from what I have heard it can still be damaged.

I will get you the part number but I am not sure if it is the ECU. Basically I hotwired the fuel pump, drove around leisurely for maybe 5 miles and then when I slammed the gas all hell broke loose and the MFI started clicking, the car turned on and off (like all the gauge start up sequences, radio, amps) started turning on and off and then it died. It wont start usually but sometimes it does but it dies quickly when it does. When the fuel pump is hotwired it often starts right up and then bounces between 1k and 1.5k rpm and then dies. MFI has been replaced, all fuses are intact.

Emilie@GZP
05-21-2011, 04:33 PM
can you get a direct overhead picture? It's hard to see the other capacitors.

If it's not the ECU, it could be something really wrong with the wiring, and it's shorting out or something.

92EuroDiamante
05-23-2011, 05:59 PM
can you get a direct overhead picture? It's hard to see the other capacitors.

If it's not the ECU, it could be something really wrong with the wiring, and it's shorting out or something.

Looked at them and they look fine.
Any tips for where to start with the wiring?

92EuroDiamante
05-28-2011, 08:27 PM
B u m p

92EuroDiamante
05-29-2011, 08:50 PM
Anyone with good rep want me to send them my ECU to put into their car for a test? Im running out of options here!

92EuroDiamante
06-12-2011, 03:16 PM
Anyone with good rep want me to send them my ECU to put into their car for a test? Im running out of options here!

Bump.
Have been so busy with another car but really want to get this running but have no idea whats wrong!
Anyone want me to ship it out for a test?

Steve '92ES
06-12-2011, 05:01 PM
What number ECU is it? If it's compatible with my '92ES I can give it a go for you.
PM me and we can work out the details.

92EuroDiamante
06-12-2011, 06:48 PM
What number ECU is it? If it's compatible with my '92ES I can give it a go for you.
PM me and we can work out the details.

that would be amazing of you!
MD175552 is the part number on the casing.

Steve '92ES
06-12-2011, 08:11 PM
MD175552 is the part number on the casing.
Hmmm. That's a non-3S part number. Looks like it's for a 1991-1993 Diamonte with traction control.
I know you said they're similar, do you know if there's any differences in the pin-outs?
Have you ever tried a 3S ECU in your car?
I'd hate to plug it in and then find out that the power comes in on different pins.
I can try it if you want since I believe there's more danger to you then to me but keep in mind that without a pin-out I can't promise that plugging it into my car won't blow it up....

Any diagrams or schematics you have would help.

Emilie@GZP
06-13-2011, 11:14 AM
is that diamante with the 3000GT engine?

GTOJOE
06-13-2011, 07:29 PM
/\ yes it is.... sort of. Same DOHC NA motor I believe.

92EuroDiamante
06-23-2011, 03:50 AM
is that diamante with the 3000GT engine?
Yup, I dont know for a fact that the ECUs are exactly the same, however I do know for a fact that if swapped with an appropriate ECU the diamante will start and run with a 3s ecu.

92EuroDiamante
07-01-2011, 03:26 AM
anyone want to give this ecu a try? i cant find anything else wrong with the car and am getting no response from vendors claiming to be able to bench test ECUs when I email them.

Steve '92ES
07-01-2011, 02:46 PM
?? Said I was willing, never got a PM...

92EuroDiamante
07-01-2011, 05:08 PM
oh sorry,thought you were apprehensive due to it being a non 3s. several sponsors/ trusted sites are listing used ECUs with the same number as mine to be used for first gen dohcs so it looks like its fine. ill pm you when I'm off work. thank you :)

Steve '92ES
07-01-2011, 06:06 PM
oh sorry,thought you were apprehensive due to it being a non 3s.
Well I am, a little bit. All I was asking though is if you had any documentation.
I'm more worried about damaging your ECU than I am about damaging my car, so if you're willing to risk it I'm willing to plug it in.. :)

Knowing there are vendors that list it does take a load off my mind.